Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Lake Dallas, TX
Warden Gate Repair is the gate company Lake Dallas homeowners call when a swing gate starts dragging on clay-heaved posts or an opener quits after a lakeside storm. We’re a gate and opener specialist, not a general handyman, and we send you a named, photo-badged tech with a written price before any work starts. If you’re dealing with a rusted hinge, a leaning post, or a dead motor on a lakefront property, call (828) 426-7081 and you’ll talk to a live person who knows Lake Dallas gates.
Why Lake Dallas Homes Are Different
Lake Dallas sits right on Lewisville Lake, and that waterfront location shapes almost every gate repair we do here. The housing stock splits into two very different problems: older 1950s – 1970s lakefront cottages built as weekend cabins and later converted to permanent homes, and newer infill subdivisions with larger lots and automated driveway or boat-storage gates. The older properties often have manual swing gates on posts set into shallow 1960s-era concrete pads. Those pads were never meant for daily use, and North Texas clay has shifted them inches out of plumb.
That clay is the second thing that makes Lake Dallas work different. Expansive black clay swells after heavy rain and contracts hard in summer drought. Gate posts heave, lean, and pull hinges out of alignment. Add the extra humidity off the lake, and untreated iron hardware rusts faster than it does a few miles inland in Corinth or Highland Village. A gate that simply needs a hinge replacement in Lewisville often needs post re-setting and corrosion work here.
Our Main Lake Dallas Services
Most calls we take in Lake Dallas come down to two problems: a gate that won’t swing or slide properly, or a motor that won’t move it at all. Each service has its own Lake Dallas page with full pricing and details.
Gate Repair in Lake Dallas
Gate repair here usually starts with alignment. Clay movement pushes posts out of plumb, the gate drags on the ground or binds at the latch, and hinges wear unevenly. We re-set posts in properly sized concrete footings, replace rusted hinges, and adjust the gate so it clears the ground and closes squarely. On lakefront properties we see a lot of corrosion-related hardware failure: seized hinges, rotted post bases, and sagging frames that need reinforcement before they fail completely. See the full breakdown of what we fix on our Gate Repair in Lake Dallas page.

Electric Gate Repair in Lake Dallas
Electric gate problems in Lake Dallas often trace back to moisture. Humidity off the lake seeps into control boards and wiring connections, and solar-powered openers on boat-storage gates get weak when summer storms cut sun exposure for days. We troubleshoot the full system, operator and sensors, keypads, loops, and safety edges, then replace only what’s failed. Many older lake-cottage gates were never intended for automation, so we’ll tell you honestly if the gate structure needs work before a new operator makes sense. Details, including common failure points and brand-specific fixes, are on our Electric Gate Repair in Lake Dallas page.

Gate Motor Repair in Lake Dallas
The gate motor, the box that slides or swings your gate automatically, works harder in Lake Dallas than in inland neighborhoods. Sliding gates with clay-shifted tracks put extra strain on the motor. Lakeside humidity corrodes internal connections over time. We repair motors from FAAC, LiftMaster, BFT, Viking, Linear, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we keep common parts stocked so many motor jobs are done in a single visit. Before you call, it helps to know the brand name on the motor and whether it hums, buzzes, or does nothing. See Gate Motor Repair in Lake Dallas for pricing and what we check.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lake Dallas
Our techs are factory-trained on nine major gate and opener brands, and in Lake Dallas we most often work on FAAC, BFT, Linear, and Viking systems. Common replacement parts for those brands are stocked on our local trucks, so a one-visit repair is usually possible. See our brands for the full list and what each one typically needs.
Pricing for Gate Company in Lake Dallas, TX
These are typical ranges for common gate jobs in Lake Dallas. Your written price is always given before we start any work, and it’s the price you pay, no surprise line items at the end.
| Service | Typical range in Lake Dallas |
|---|---|
| Gate repair service call | $75 – $125 |
| Electric gate diagnostic | $89 – $149 |
| Gate motor replacement (parts added) | $450 – $900 |
| Hinge replacement (pair) | $150 – $300 |
| Post re-setting (single post) | $250 – $500 |
| Control board replacement | $300 – $600 |
| Safety sensor / photo eye replacement | $150 – $300 |
| Automation retrofit (operator + hardware) | $1,500 – $3,500 |
Two things push prices toward the higher end of those ranges in Lake Dallas: post re-setting on clay-damaged footings, and corrosion repair on older lakefront gates. When we quote, we include the full scope of work in writing before anything is touched.
Neighborhoods We Serve in Lake Dallas
We work throughout Lake Dallas, from the original lakefront streets near Lewisville Lake to the newer subdivisions farther east. Our normal response time across the city is same-day or next-day for gate repair and electric gate failures.
- Lake Dallas lakefront and near-shore areas
- Older 1950s – 1970s cottage neighborhoods
- Newer infill subdivisions with larger lots
- Properties with boat-storage or RV enclosures
- Homes along the I-35E corridor east of the lake
Service Area – Cities Near Lake Dallas
Warden Gate Repair also serves communities right around Lake Dallas. If you’re in Little Elm, TX on the northeast side of Lewisville Lake, Lewisville, TX to the south, Argyle, TX to the west, or The Colony, TX to the southeast, our techs cover those areas with the same named-tech, written-price standard. Dispatch for all of these areas is coordinated from our Dallas-Fort Worth office.
Serving Lake Dallas, TX - Our Local Coverage Area
We’re based in the Lake Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Dallas
Most Lake Dallas gate repair calls are handled same-day or next-day. We coordinate dispatch from our DFW office, so a tech is already in or near Lake Dallas most weekdays. Call (828) 426-7081 and we’ll give you an arrival window on the phone.
Some newer Lake Dallas subdivisions have HOA rules that require board or committee approval before changing a gate’s appearance or adding automation. Repairs that keep the existing gate looking the same usually don’t need approval. We’ll tell you what we’ve seen in your neighborhood and let you verify with your HOA.
Yes. We run power to the operator, install and align safety edges and photo sensors, and make sure the gate reverses properly under obstruction. That safety work is part of every automation or electric repair quote we give, and it’s done to current code standards.
If your Lake Dallas gate is dragging, sagging, or refusing to move, call Warden Gate Repair at (828) 426-7081. We’ll put a real person on the line, schedule a tech you’ll know by name and photo, and give you a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Dallas Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.





Before
After
Before
After
Before
After