Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Argyle, TX
Warden Gate Repair is the gate company Argyle homeowners call when a driveway gate stops working the way it should. Argyle isn’t a typical North Texas suburb. The mix of legacy ranch properties and newer equestrian estates, combined with Blackland Prairie clay that moves seasonally, creates repair patterns you simply don’t see in Flower Mound or Lewisville. We work on gates across Argyle, from single swing gates on older ranch entrances to heavy 20-foot slide gates on estate driveways. Call (828) 426-7081 and you’ll speak with a live person, any hour.
Why Argyle Homes Are Different
Argyle sits in the heart of Denton County’s horse-country corridor. A large share of properties here are working equestrian estates on 2 to 10-plus acre lots with long private driveways. That shapes the gates we repair. Where a typical suburban home has a decorative 10-foot swing gate, Argyle driveways routinely need 16 to 20-foot dual-swing or slide gates built for wide clearance so horse trailers and stock trailers can pass through. These are heavier gates, with heavier motors and more demanding hinge geometry.
The housing stock splits two ways. Older ranch properties still have the original pipe-rail or welded-steel gates, many now fighting decades of rust and hinge wear. Newer custom estate homes, mostly built from the 2000s forward, feature ornamental iron automated gates with operator systems that fail electrically. Both create steady work, but for different reasons.
The soil is the third factor. Denton County’s Blackland Prairie clay shrinks during summer drought and heaves after rain more aggressively than almost any soil in Texas. Gate posts set in that clay shift out of plumb seasonally, which causes hinge binding, latch misalignment, and early wear on automatic operators. In Argyle, post realignment is a recurring service call, not a one-time fix.
There’s also a distinctive quirk to rural Argyle parcels. Solar-powered gate operators are unusually common here because long caliche driveways often lack a conduit run to the road. Diagnosing a failed battery bank or charge controller is a core part of what our techs do in Argyle, something that rarely comes up on a standard suburban gate call in nearby Denton or Roanoke.
Our Main Argyle Services
Here are the three services Argyle homeowners call us about most, each covered in detail on its own page.
Gate Repair in Argyle
Gate repair in Argyle covers the structural side: sagging gates, seized hinges, bent posts, latch misalignment, and rust-damaged frames. On older ranch properties, we frequently rebuild hinge assemblies on pipe-rail gates that have shifted with the clay soil. On newer estate homes, we straighten ornamental iron gates that have twisted under their own weight. Every repair gets a written price before we touch a tool. Gate Repair in Argyle has the full breakdown.

Electric Gate Repair in Argyle
Electric gate repair handles the powered side: keypads, intercom wiring, safety sensors, loop detectors, and the low-voltage systems that tell the gate when to open. Argyle’s solar-heavy landscape means we spend more time here on charge controller diagnostics and battery bank replacement than crews do in fully wired suburbs. If your gate opens but won’t close, or the keypad works only sometimes, this is the page. Electric Gate Repair in Argyle explains what we check first.

Gate Motor Repair in Argyle
Gate motor repair in Argyle focuses on the operator itself, the box that slides or swings your gate automatically. The motors on 20-foot equestrian gates work harder than anything on a typical subdivision lot, and that extra load shortens the life of gears, limit switches, and drive belts. We service LiftMaster, Viking, Ghost Controls, DoorKing, and Linear operators. Gate Motor Repair in Argyle covers diagnosis and replacement in detail.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Argyle
We service gate operators from LiftMaster, Viking, Ghost Controls, DoorKing, and Linear, among others. Our Dallas-Fort Worth office keeps common parts stocked locally, so a solenoid, limit switch, or control board for an Argyle job is often ready the same day rather than waiting on a distributor. See our brands for the complete list.
Pricing for Gate Company in Argyle, TX
These are the ranges Argyle homeowners actually see for the most common calls. Exact pricing depends on gate size, access, and what failed, but these figures reflect the local market.
| Service | Typical range in Argyle |
|---|---|
| Basic gate repair (minor hinge or latch adjustment) | $175 – $325 |
| Gate post realignment | $350 – $800 |
| Gate operator motor replacement | $650 – $1,700 |
| Control board replacement | $350 – $850 |
| Safety sensor repair or replacement | $125 – $300 |
| Keypad or intercom wiring repair | $150 – $400 |
| Limit switch replacement | $150 – $350 |
| Solar battery bank replacement | $250 – $600 |
| Full solar charge controller replacement | $200 – $500 |
| Complete slide gate system install | $3,800 – $9,500 |
| Complete dual-swing gate system install | $2,800 – $7,000 |
| Overhead slide gate conversion | $4,000 – $8,000 |
Argyle prices skew toward the upper end of these ranges when the job involves a 16-to-20-foot equestrian gate, a solar system, or posts that have heaved badly in the clay. We give you a written price before any work starts, and that’s the price. No line items added at the end, no surprise adjustments.
Neighborhoods We Serve in Argyle
We cover all of Argyle, from the original ranch parcels near FM 407 to the estate subdivisions along Crawford Road and Harpole Road. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and our techs know these roads well.
- The Preserve at Argyle
- Country Lakes
- Harvest
- Estates of Argyle
- Bartonville-adjacent ranch properties
Standard response for most repair calls in Argyle is one business day. Emergency calls for a gate that won’t close get routed to the next available tech, and we’ll tell you honestly when we can be there when you call.
Service Area – Cities Near Argyle
Warden Gate Repair serves Argyle first, but we regularly work the surrounding North Texas communities. If you’re just over the line, we cover Flower Mound, TX, Roanoke, TX, Lake Dallas, TX, and Denton, TX. Same crew standards, same written pricing, same tech name and photo before we arrive.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Argyle
Most Argyle repair calls are scheduled within one business day. For a gate that won’t close or won’t open and blocks access to your property, we treat it as an urgent call and route the next available tech. When you call, we’ll give you a real arrival window, not a hallway of four hours.
Some Argyle subdivisions with gate or fence standards, especially the newer estate communities, do require HOA approval before a gate is modified or replaced. If you’re unsure, we recommend a quick call to your HOA management first. For straight repairs of an existing gate, approval is rarely required. We can’t speak for your specific HOA, but we can tell you what the work will look like so you can describe it accurately.
Yes. Solar gate operators are common across the rural and semi-rural parts of Argyle, and we routinely diagnose battery bank failures, charge controller faults, and panel alignment issues on those systems. The diagnostic process is the same as a wired gate, but the fix often involves replacing a battery bank rather than a motor. We’ll tell you which one it is before any work starts.
Ready to get your gate working again? Call Warden Gate Repair at (828) 426-7081 for a free estimate. A live person answers, and you’ll get a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Argyle Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.





Before
After
Before
After
Before
After