Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Pasadena, CA
Gate repair in Pasadena usually costs between $180 and $340 for common fixes like hinge replacement, opener repair, or sensor alignment, with full motor replacement running $800 to $1,200 on average. What sets Pasadena apart is the air itself: this city sits in the heart of the Houston Ship Channel petrochemical corridor, so sulfur compounds and industrial particulates settle on gate hardware year-round and rust steel fast. That means gates here need a corrosion-aware technician who specs materials differently than they would in drier Houston suburbs. Call (828) 426-7081 and you’ll get a written price before any work starts.
Why Pasadena Homes Are Different
Most residential gates in Pasadena are attached to post-WWII ranch-style tract homes built between the 1950s and 1970s, put up quickly to house refinery and chemical plant workers. The original driveway gates on those homes are typically wrought iron or tubular steel, and many have been swinging on the same hinges for fifty or sixty years. By now the hinge pins are often worn to half their original diameter, and the bottom rails carry rust blooms where Gulf Coast humidity pools inside the tubing.
The bigger variable is the air itself. Hydrogen sulfide and airborne sulfur compounds from the Ship Channel react with moisture to form a mild acidic film on exposed metal. Zinc-plated hardware that would last a decade in Katy or Pearland can show active rust inside a single humid Pasadena summer. Techs who work the refinery buffer zones along Red Bluff Road and Shaver Street learn to replace with hot-dip galvanized or stainless hardware as a baseline, not an upsell. The 2017 Harvey flooding made it worse: underground conduit and gate motor housings that took on water still push moisture up into operator boards years later, and those failures tend to look intermittent until the board finally gives out.
Our Main Pasadena Services
Most Pasadena homeowners call us first for two things: a gate that won’t open smoothly, or an electric opener that stopped responding. Both are covered on their own pages, each with local pricing and what to expect from the visit.
Gate Repair in Pasadena
Gate Repair in Pasadena covers the physical gate itself: sagging leaves, seized hinges, broken welds, rusted bottom rails, latch and lock alignment. On Pasadena’s older ranch homes we’re usually dealing with original ironwork that’s outlasted its hardware. We replace hinges, reinforce rusted frame sections, and re-hang the leaf so it swings true again. Written price first, every time.
Electric Gate Repair in Pasadena
Electric Gate Repair in Pasadena covers the powered side: keypads, remotes, loop detectors, safety edges, and the low-voltage path from panel to operator. Ship Channel humidity creeps into junction boxes and corrodes wire terminations faster here, so a dead remote is sometimes just a corroded contact, and sometimes a failing control board. We test the whole circuit before quoting a fix.
Gate Motor Repair in Pasadena
Gate Motor Repair in Pasadena covers the motor itself (the box that slides or swings your gate automatically): gear wear, limit switch failure, capacitor burnout, and full motor replacement. Pasadena’s industrial-side properties along Spencer Highway run slide gates through hundreds of cycles a day, so motor internals wear on a schedule, not just by age. We carry parts for nine major brands and quote a replacement only when repair doesn’t make sense.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Pasadena
We’re factory-trained on the brands Pasadena gates actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts for Viking, Ghost Controls, DoorKing, and Elite are kept in local stock, so most repairs don’t wait on a shipment. See our brands for the full compatibility list.
Pricing for Gate Company in Pasadena, CA
| Service | Typical range in Pasadena |
|---|---|
| Hinge replacement (per hinge) | $45 – $120 |
| Gate opener repair | $180 – $340 |
| Gate motor replacement | $800 – $1,200 |
| Sensor alignment | $75 – $140 |
| Keypad replacement | $120 – $220 |
| Loop detector repair | $150 – $300 |
| Safety edge replacement | $90 – $180 |
| Remote programming | $45 – $90 |
| Track and roller replacement | $200 – $450 |
| Gate lubrication and tune-up | $70 – $130 |
Prices in Pasadena run slightly higher than the Houston average when corrosion has complicated the job: a hinge that should be a $45 swap becomes a $120 cut-and-weld repair if the frame rail behind it is rotted through. Whatever the scope, you’ll have a written price in hand before any work begins, and it won’t change at the end of the visit.
Neighborhoods We Serve in Pasadena
We work across all of Pasadena, from the ranch-style streets near Strawberry Park to the industrial gate systems along Spencer Highway and the Ship Channel corridors. Typical response is same-day or next morning for repair calls, depending on where the tech is in the route that day.
- Vista Villas
- Red Bluff Terrace
- Golden Acres
- Shaw
- Preston Trails
Service Area – Cities Near Pasadena
Our Pasadena crews also take repair calls in San Marino, CA, South Pasadena, FL, Altadena, CA, and San Gabriel, CA. If you’re on the edge of Pasadena and not sure which page is yours, call (828) 426-7081 and we’ll tell you which crew covers your street.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pasadena
Repair calls in Pasadena are usually same-day or next morning. The 24/7 line is answered by a live person, not a voicemail, so you’ll know the schedule before you hang up. Call (828) 426-7081 and we’ll give you a real arrival window.
Most repair work hinges, sensors, motor swaps needs no permit. Full gate replacement or new opener installation may, depending on the scope and your property. We’ll tell you during the quote whether a permit applies to your job and who handles the paperwork.
Yes. We handle residential driveway gates on the ranch-home streets and high-cycle slide and swing gates on the industrial and commercial properties along Spencer Highway and the Ship Channel corridors. The same written-price rule applies to both.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.