Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Orlando
Electric gate repair in Orlando typically runs $180 – $520 for most board, sensor, and opener jobs, with same-day service available across the metro. Warden Gate Repair answers live 24/7 at (828) 426-7081, and the technician who arrives at your gate is the same person whose name and photo we sent you before he left the shop. We work the vacation-resort corridor, the HOA-heavy neighborhoods of Dr. Phillips and Hunter’s Creek, and every gated community in between.
We know the gate stock here because we see it every week: builders put in entry systems on 20 to 30 year old timers now, and the original LiftMaster and Elite operators from the 1990s and 2000s boom are failing across Orlando all at once. Call us with the gate stuck open, stuck shut, or grinding in the track. We will give you a written price before any work starts.
Why Warden Gate Repair Is Orlando’s Preferred Electric Gate Repair Company
Orlando homeowners hear a lot of promises when a gate breaks. What we do differently is boring on purpose: a background-checked, photo-badged technician shows up when we said he would, diagnoses the problem, and hands you a printed price before touching a single screw. That has been the rule since Cole Rafferty started running this operation, and it applies to every job from a storefront slide gate on Orange Avenue to a driveway swing gate in Celebration.
We only do gates. No handyman work, no side quests. That focus means our trucks carry control boards, sensors, remotes, and hinge hardware for the operators Orlando actually uses, from FAAC and BFT to Linear and Viking. The 365-Day Done Right Promise backs every repair in writing: if the repair fails within a year, the return visit is free. No argument, no invoice.
The Threshold Standard is the name on the door, and it means the tech’s photo ID badge is shown at your door before he enters. We send his name and photo to your phone before arrival. You decide whether to answer the gate. Every time.
Gate Opener Repair in Orlando
Gate opener repair in Orlando starts with the operator (the box that slides or swings your gate automatically) and the board inside it. We see two jobs more than any other here: surge-killed control boards from summer thunderstorms, and builder-grade operators that were undersized for the gate from day one and finally gave out.
Control Board Replacement
Orlando sits inside Florida’s Lightning Alley. Over 100 thunderstorm days a year means the board inside your opener is a surge target. The failure is usually silent, just a dead keypad and a gate that ignores the remote. We stock replacement boards for LiftMaster, Elite, and Linear on the truck, so a board swap in Orlando is routinely a same-visit repair, not a three-day wait for parts.
Opener Motor and Drive Repair
A builder-grade motor rated for light residential use cannot carry a heavy ornamental aluminum gate in Hunter’s Creek for twenty years. We see stripped gears, burned windings, and dragging panels that overload the motor until it trips. The fix is sometimes a replacement motor, sometimes a full operator swap to a properly sized unit. We quote it before we touch it.
Automatic Gate Repair in Orlando
Automatic gate repair in Orlando gets complicated where the original build cut corners. In the 1990s and 2000s master-planned boom, thousands of manual swing gates went in with no power run and no conduit. Now the owner wants automation, and the trench becomes half the job.
Add-on Automation and Power Runs
We picked up a call in Storey Lake on a row of driveways where manual swing gates are finally getting operators added. Almost none of them had a dedicated circuit or conduit in place. The operator gets mounted, the circuit overloads, and the breaker trips every time the gate moves. We handle the operator and the power run together, sized to the gate, so the circuit and the gate both survive.
Post and Hinge Reinforcement
The other failure we trace to the original build is the hinge post. Footings poured shallow during construction cannot handle the added torque of a retrofit operator. The post shifts, the gate drags, and the new motor burns out early. We set the post properly before the operator goes on, because replacing a motor on a shifting post is just buying the next failure.
Trusted Brands We Service in Orlando
Our Orlando technicians are factory-trained on the operators that dominate this market. We service FAAC, BFT, Linear, and Viking alongside LiftMaster, Elite, DoorKing, Ghost Controls, and Mighty Mule. Because we carry brand-specific boards and parts on the truck, a repair that a generalist would order and wait on, we often close the same visit. If you have a Viking swing operator in Maitland or a Linear slide gate in Altamonte Springs, we already know the failure patterns and stock the fix. Our full Electric Gate Repair team supports Orlando with same-day board swaps and next-day parts for anything we don’t carry.
Common Electric Gate Repair Problems We See in Orlando Homes
- Surge-killed control boards – Orlando’s summer thunderstorms send spikes through gate operators with no surge protection on the circuit. A power strip inside the housing is not enough; we see boards fried through clean-looking installations every June through September.
- Builder-grade operator burnout – Developers put in the cheapest opener that passed code in the 2000s. Those units cannot handle heavy ornamental gates cycling daily and burn out motors and relay boards years before their rated life.
- Manual gates with no power run – Newer Orlando construction often left the gate manual. Adding automation means trenching a dedicated line, or the operator shares a circuit with landscape lighting and trips constantly.
- Vacation-rental gate fatigue – Gates near the theme parks in Champions Gate and Reunion cycle 80 to 100 times per day versus 15 to 20 in a residential neighborhood. Loop detectors and board relays fail from pure duty-cycle exhaustion, not age.
Pricing for Electric Gate Repair in Orlando, FL
Here are real numbers for Orlando. A control board replacement runs $220 – $480 depending on the brand and board. A gate opener motor replacement typically runs $350 – $700 parts and labor. Keypad and remote reprogramming in Orlando runs $95 – $180. A full operator replacement on a standard driveway gate, unit and install, runs $1,200 – $2,400. A retrofit power run and trench for an automated gate adds $400 – $900 depending on distance and whether we cross concrete. Every job gets a written price before the work starts. Every price holds. Call (828) 426-7081 and describe the gate; we will give you a tight range over the phone, free.
We Also Serve Cities Near Orlando
From our Orlando office we send the same photo-badged technicians to Winter Park, Maitland, Goldenrod, and Altamonte Springs. If your gate is on the edge of the city or you have a rental property in a neighboring town, we can usually route a tech the same day. For service across the full metro area, see Electric Gate Repair in Orlando.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Orlando
In Orlando the usual culprit is a lightning strike or power surge inside Florida’s Lightning Alley, not the board itself. A nearby strike doesn’t need to hit your gate directly; a surge travels through the utility lines, into the operator circuit, and kills the board instantly. The fix is a replacement board plus a surge protector installed on the gate’s dedicated circuit. Without the surge protection, the next storm season will likely kill the next board the same way. Call (828) 426-7081 and we will quote the board and the surge protection together.
Yes, we automate manual gates throughout Orlando regularly. The operator is the easy part. The two things to verify first are the power run and the hinge post. Most 2000s-era manual gates have no dedicated conduit, so we trench a circuit rated for the operator. If the post footing is too shallow for the added torque, we set it properly before hanging the operator. We quote the full scope, trench included, before any work starts.
In Orlando we see this on gates where the original post footing was poured shallow during construction. The operator works fine, the hinges look fine, but the post has shifted enough that the gate panel drags on the ground at the latch side. The fix is resetting the post, not replacing the operator. We diagnose it on site and give you a line-item quote so you see exactly what the post work costs.
Yes, dramatically more. A gate at Champions Gate, Reunion, or Storey Lake cycles 80 to 100 times a day from guest turnover. That is five times the duty cycle of a typical residential gate in Orlando. Control boards, loop detectors, and relay modules wear out from cycle count and heat, not age. If you manage a vacation rental near the parks, schedule a visual inspection twice a year and budget for board replacement every three to five years. We stock the most common resort operator boards on the truck so a dead gate doesn’t strand guests overnight.
Yes. Under Florida law and the relevant UL 325 standard, automatic gates in Orlando require entrapment protection: photo eyes or an edge sensor that reverses the gate when something is in the path. If your gate is older and lacks working protection, it is both unsafe and a legal liability. We install and test safety edges and sensors with every operator install or board replacement. Call (828) 426-7081 for a free estimate on bringing your gate up to code.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Orlando, FL with factory-trained gate technicians and the 365-Day Done Right Promise.