Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Plantation, FL
Gate repair in Plantation usually means one of two jobs: a community-entry gate that’s failed under an HOA’s watch, or a private driveway gate on the city’s western edge where posts have rotted in the wet season. We work on both, along with the electric motors and operators behind them. If your gate won’t open, won’t close, or groans like it’s about to quit, call us at (828) 426-7081. We’ll tell you who’s coming, send a photo before we arrive, and put the price in writing before any work starts.
Why Plantation Homes Are Different
Plantation was built as one of Broward County’s most thoroughly master-planned cities. That means an unusually high number of HOA-governed subdivisions, many developed between the 1970s and early 1990s, each with community-entry vehicular gates that are now aging out at roughly the same time. When one fails, you’re not just fixing a gate. You’re navigating an architectural review board, matching legacy ornamental aluminum or wrought-iron aesthetics, and often sourcing parts for gate operators and access-control systems that manufacturers stopped supporting years ago. We keep a healthy stock of new-old parts for exactly these communities, so what looks like a full replacement to another company is often a same-week repair to us.
Out west in Plantation Acres, the picture shifts. Those are large-lot and equestrian properties, many with privately owned driveway swing gates hung on wooden or hollow-block posts. South Florida’s June-through-October storms don’t just stress the gate motor. They saturate the posts, and when a post rots or cracks, the whole anchor bed has to be replaced alongside the operator work. That’s a different job than a condo gate on Broward Boulevard, and we treat it differently.
One more Plantation-specific wrinkle: Broward County’s post-Hurricane Andrew wind-load requirements, enforced since 1994, apply to gate panels as well as buildings. So when an HOA approves a panel replacement, even a like-for-like swap, the new panel often has to meet current Florida Building Code wind ratings. The thinner-gauge aluminum installed 30 years ago usually won’t pass today. Boards don’t always see that coming in the budget, and we walk them through it before ordering a single panel.
Our Main Plantation Services
The two calls we get most from Plantation are gates that won’t move and motors that make noise but don’t do the job. Here’s what each one looks like in this city.
Gate Repair in Plantation
A Plantation gate repair is rarely just a hinge or a wheel. In HOA communities it’s usually a panel that’s sagging, a wheel that’s worn into the track, or a chain idler that’s seized from humidity and salt air. In Plantation Acres it’s more likely a post that’s let go in the wet ground. Either way, we send a technician by name and photo before the visit, quote the fix in writing, and do the work the same day when parts allow. Gate Repair in Plantation
Electric Gate Repair in Plantation
Electric gate repair here is dominated by control-board failures, and South Florida’s daily summertime lightning is the leading culprit. A surge cooks a capacitor on a mid-1990s board and suddenly the entry gate for an entire Plantation community is dead. We stock and source boards, loop detectors, keypads, and photo-eyes for older systems that most parts houses no longer carry. Electric Gate Repair in Plantation
Gate Motor Repair in Plantation
The gate motor, the box that slides or swings your gate automatically, takes the worst of Plantation’s humidity. Bearings corrode, capacitors swell, and swing-arm actuators bind when the wet season hits. We rebuild motors in place where it makes sense and replace them with factory-fresh units when it doesn’t, always with the written price handed over before a single tool comes out. Gate Motor Repair in Plantation
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Plantation
We’re factory-trained on FAAC, BFT, Linear, and Viking, among others, and we carry a running inventory of boards, arms, and receivers for the models Plantation’s older communities actually use. Having the right part in the truck turns a three-week HOA gate closure into a one-visit repair. Our brands page lists the full setup.
Pricing for Gate Company in Plantation, FL
| Service | Typical range in Plantation |
|---|---|
| Gate won’t open or close | $180 – $290 |
| Gate off track or sagging | $220 – $380 |
| Electric gate not responding | $190 – $320 |
| Gate motor replacement | $850 – $1,400 |
| Control board replacement | $350 – $650 |
| Gate keypad or intercom repair | $160 – $280 |
| Loop detector fault | $230 – $360 |
| Post anchor replacement (wooden posts) | $250 – $580 |
| HOA entry gate service call | $190 – $320 |
What pushes a Plantation job to the upper end is usually parts: a proprietary control board from a discontinued model costs more because we have to source it from a specialist supplier, not a store shelf. The good news is the price still comes to you in writing before any work begins. If we find something extra once the gate is open, you approve it before we touch it. No line-item surprises at the end.
Neighborhoods We Serve in Plantation
We run calls across Plantation all week, and most repairs are scheduled within one to two business days. Gate motor failures at an HOA entry get priority because every resident behind that gate is affected.
- Plantation Acres
- Jacaranda
- Central Park
- Plantation Isles
- Fountain Springs
Service Area – Cities Near Plantation
We also serve homeowners and HOAs in the surrounding Broward County area. If you’re in Fort Lauderdale, FL, Margate, FL, Coconut Creek, FL, or Pompano Beach, FL, the same written-price and named-technician process applies. Dispatch is coordinated from our Miami (South FL) office, and crews serve Plantation locally.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Plantation
For an HOA entry gate in Plantation, we typically schedule within one business day, and can often route a technician sooner when the gate is blocking vehicle access. Call us at (828) 426-7081 and tell us the community name and the gate’s behavior. We’ll give you a real arrival window, not a four-hour range.
Most gate repairs in Plantation, like motor swaps, hinge replacements, and board changes, don’t require a permit. The exception is when a panel or post must be replaced, especially in a community where post-1994 wind-load codes apply. We handle the permit conversation for you and tell the HOA what’s needed before anything gets ordered.
A named, background-checked technician whose photo we send to you before arrival. That’s the Threshold Standard, and we don’t skip it. When the tech rings the bell, their photo badge matches the photo you already have. You decide whether to open the door. The written quote is handed to you before any work begins.
If your gate is acting up, call (828) 426-7081 for a free estimate. We’ll tell you who’s coming, what it’ll cost, and when we’ll be there.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Plantation Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.