Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Plantation
An electric gate that won’t open or close in Plantation is more than a frustration. It’s a security gap, an HOA violation waiting to happen, and a car stuck in your driveway. Electric gate repair in Plantation typically runs $180 to $380 for most operator, keypad, and sensor fixes, and we get a technician to your community fast. Our crews know Plantation’s gated neighborhoods, and we carry parts for the aging operators your gates were built with. Call (828) 426-7081 and you’ll reach a live person who can schedule your repair right away.
Why Warden Gate Repair Is Plantation’s Preferred Electric Gate Repair Company
Plantation homeowners and HOA boards call us because we do one thing: gates. Warden Gate Repair doesn’t do plumbing, roofing, or handyman work. Our sole focus is electric gate repair, gate motor repair, and access-control equipment, which means the technician at your gate in Plantation has spent his or her day working on gates, not on garbage disposals. We’re part of the Threshold Group family, founded in 2008, and every technician we send to Plantation has been background-checked, identity-verified, and photo-badged under what we call the Threshold Standard. Before your appointment, you’ll receive the technician’s name and photo. When they arrive at your Plantation home, they’ll show photo ID at the door. That matters when you’re letting a stranger onto your property.
Our Plantation customers also know their price before the work begins. No vague estimates, no “we’ll see once we open it up.” You get a written price, agreed to before the first tool comes out. And every repair carries the 365-Day Done Right Promise: if the repair isn’t right, we return and make it right at no charge. That’s not a sales pitch; it’s a written guarantee included with every job we do in Plantation.
Automatic Gate Repair in Plantation
Automatic Gate Repair in Plantation usually means one of two things: the gate itself won’t move, or it moves wrong. A gate that creeps, reverses, or slams shut without warning is a safety problem, and in Plantation’s HOA communities, it’s also a liability problem. We repair the full assembly: hinges, wheels, track, panel alignment, safety edges, and the operator that drives it. Most automatic gate repairs in Plantation run $220 to $520 depending on whether we’re replacing a hinge and realigning the panel or swapping a burned-out operator arm.
Hinge and Post Repairs
On older Plantation gates, sagging and binding often trace back to hinge posts that have rotted, cracked, or settled in the wet soil. Fixing the operator without addressing the post is a temporary fix. We pull the post, pour a new footing, square the gate, and then adjust the operator so it isn’t fighting the panel’s weight.
Safety Edge and Loop Detector Repairs
Automatic gates in Plantation must reverse if they hit an obstruction, and loop detectors must sense a car waiting at the entry. Humidity and rust shorten the life of both. If your gate closes on cars or won’t open for visitors, the safety edge or loop detector is usually the first thing we check.
Electric Gate Motor in Plantation
An Electric Gate Motor in Plantation is the box that slides or swings your gate automatically, and it’s the component most likely to die after a storm. When a motor fails, the gate either won’t move at all or makes a grinding, clicking, or humming sound while doing nothing. Motor repair in Plantation typically costs $240 to $480 when we’re replacing gears, capacitors, or limit switches. Full motor replacement, which is common on 1990s and early-2000s equipment, runs higher, and we’ll quote it before any work starts.
Control Board and Capacitor Failure
South Florida’s June-through-October storms are hard on gate motors. Lightning and power surges travel through the electrical supply and fry control boards, capacitors, and transformer circuits. On older operators, the boards are often discontinued, which forces a decision: replace the whole motor or patch a unit that will fail again. We’ll give you an honest recommendation with the price difference spelled out.
Motor Arm and Gear Replacement
In Plantation Acres and other large-lot communities, swing-gate motor arms take a beating. Long, heavy gates on wooden posts stress the arm’s gears and internal stops. Replacing the gear assembly is often cheaper than replacing the whole operator. We stock gear kits for LiftMaster, FAAC, BFT, and Linear motors, so many repairs finish the same day.
Trusted Brands We Service in Plantation
We’re factory-trained and authorized to service equipment from FAAC, BFT, Linear, and Viking, among others. Plantation’s older communities were built with operator brands that have since changed hands or discontinued lines, but our Electric Gate Repair team keeps parts on hand for the legacy models we see most often. If we can’t source a board, we’ll tell you before we take anything apart. Our goal is to make your gate work again, not to sell you a new operator you didn’t need.
Common Electric Gate Repair Problems We See in Plantation Homes
- Surge-fried control boards: Plantation’s storm season sends lightning strikes and power surges into gate operators, and on mid-1990s to early-2000s units, the original boards are often discontinued. That turns a simple board swap into a full operator replacement, and we’ll quote both options before you choose.
- Rotted hinge posts in Plantation Acres: Large-lot properties on the west side often have driveway swing gates on wooden posts, and those posts rot at the footing during the rainy season. The gate sags, the operator binds, and the homeowner thinks the motor failed, when the real problem is below ground.
- HOA gates failing in clusters: Plantation was built as a master-planned city, and whole subdivisions got their gates installed within a few years of each other. That means a dozen gates in one community can reach the end of their service life at the same time, and boards often need coordinated replacement.
- Wind-load compliance on panel swaps: When an HOA in Plantation replaces a gate panel, even a like-for-like swap, Broward’s post-Hurricane Andrew wind-load rules require the new panel to meet current Florida Building Code ratings. That often means thicker aluminum than the original gate had, which changes the operator’s load requirements too.
Pricing for Electric Gate Repair in Plantation, FL
Here’s what Plantation homeowners can expect to pay. Keypad and remote programming runs $85 to $160. Safety sensor replacement runs $120 to $240. Hinge and post work ranges from $320 to $700 when we’re pulling and resetting a post. Control board replacement on a current-model LiftMaster or FAAC runs $180 to $400, while full operator replacement on a discontinued 1990s unit can run $900 to $1,800 installed. We quote the full price in writing before any work begins, and our free estimate covers the diagnostic visit. Call (828) 426-7081 and we’ll give you a real number, not a range with fine print.
We Also Serve Cities Near Plantation
Warden Gate Repair serves Plantation and the surrounding Broward County communities. If your gate is in Fort Lauderdale, Margate, Coconut Creek, or Pompano Beach, the same live-person scheduling, upfront pricing, and 365-Day Done Right Promise apply. Our crews are dispatched locally, so the travel time is short and the arrival windows we quote are realistic.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Plantation
Sometimes yes, sometimes no. If the panel is structurally compromised or won’t meet current Florida Building Code wind-load ratings, your HOA board may be required to replace it regardless of the operator’s condition. A new, thicker-gauge panel adds weight, and that extra load has to be accounted for in the operator’s capacity. We’ll evaluate both the panel and the operator together and tell you honestly whether the operator can stay or needs an upgrade. Call (828) 426-7081 for a free assessment before your HOA meeting.
Plantation’s HOA communities were built in synchronized waves, mostly between the 1970s and early 1990s, so the gates in a given subdivision were installed within a few years of each other and are now aging out together. That means control boards, operators, and hinge posts across an entire community hit the end of their service life at roughly the same time. It’s not a coincidence; it’s the age of the original equipment. We do multi-gate assessments for HOAs in Plantation so we can spot the next failures before they happen.
You can adjust the operator, but if the hinge post has rotted or settled, the adjustment won’t hold for long. In Plantation Acres, wooden and hollow-block posts absorb wet-season groundwater and lose their footing, which throws the gate out of plumb and makes the operator work against the panel’s weight. The fix that lasts is pulling the post, pouring a new footing, re-hanging the gate, and then adjusting the operator to the properly aligned panel. Skipping the post work means you’ll be calling us again in a few months.
Plantation’s June-through-October thunderstorm season delivers near-daily lightning and power surges, and those surges travel through your electrical system into the gate operator’s control board. Surge damage is the leading cause of gate failure we see in Plantation’s HOA communities. If your board is a mid-1990s to early-2000s model, the part is often discontinued, which means the repair becomes a full operator replacement. We can add surge protection to a new installation to reduce the risk of repeat failures.
Yes. Any gate panel replacement in Plantation must comply with current Florida Building Code requirements, including wind-load ratings that Broward County adopted after Hurricane Andrew. That often means the new panel won’t be the same thin-gauge aluminum that was originally installed. The operator, safety edges, and photocells must also meet current standards, so a “like-for-like” panel swap frequently becomes a panel-plus-operator project. We’ll give your HOA board a written line-item breakdown so the budget surprise doesn’t come after work starts.
Contact Warden Gate Repair for Electric Gate Repair in Plantation
If your gate won’t open, won’t close, or sounds wrong when it tries, call us. You’ll speak with a live person, not a voicemail tree. We’ll schedule a Plantation technician, send you their name and photo before arrival, and give you a written price before any work begins. Every repair includes the 365-Day Done Right Promise. Call (828) 426-7081 for a free estimate.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Plantation, FL.