Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Antelope
Gate repair in Antelope usually costs between $180 and $650 depending on whether we’re fixing a hinge, re-plumbing a post, replacing a gate motor, or welding a rusted frame. Most repairs in Antelope are completed the same day we arrive, and we answer the phone live around the clock at (828) 426-7081. If you live in one of Antelope’s 1980s and 1990s tract communities, your gate is likely reaching the age where the bottom hardware fails before the panel does. We know exactly what to look for here, because we’ve worked Antelope driveways long enough to recognize the local failure pattern before we even lift the gate off its hinges.
Key Takeaways:
- Most Antelope gate repairs run $180 – $650, with a written price before any work starts.
- Same-day service is typical for hinge, latch, and realignment work in Antelope.
- Antelope’s Tule fog and 100°F summers hit gate bases and operator electronics harder than most areas.
- Every tech is background-checked, photo-badged, and sent to you by name and photo before arrival.
- The 365-Day Done Right Promise means a free return visit if the repair fails.
We’re the Gate Repair team that shows up with a face and a name, not an anonymous van. That matters in Antelope, where a gate isn’t just access control for a driveway. It’s the first physical barrier between your family and the street, and you should know exactly who’s touching it.
Why Warden Gate Repair Is Antelope’s Preferred Gate Repair Company
Antelope homeowners call us because we tell them the truth about what they’re dealing with before we touch a tool. Cole Rafferty, who leads our team, set the standard early: a written price, a named tech, and a photo sent to your phone before anyone rolls up to your driveway. That’s the Threshold Standard, and it applies to every visit in Antelope, from Walerga Road neighborhoods to the subdivisions off Antelope Road. No surprises at the door. No wondering who the person in the driveway is.
We stock gate hardware that actually survives Antelope conditions. Most national suppliers sell zinc-plated hinges and mild steel brackets that fail in three or four fog seasons here. We specify galvanized and stainless components on Antelope jobs because we’ve replaced too many rusted-through hinge posts to pretend the coastline is the only place with corrosion problems. The Sacramento Valley’s Tule fog is a quiet destroyer, and Antelope sits right in its path. Our local reputation is built on repairs that stay repaired through fog season, not just through the next dry week.
Response time to Antelope is something we take seriously. We dispatch from Sacramento, and crews reach Antelope neighborhoods typically within an hour of your call. You won’t get a voicemail. You’ll get a person, 24 hours a day, who can tell you whether the problem is urgent or can wait until morning.
Metal Gate Repair in Antelope
Metal gate repair in Antelope is our most frequent job, and the reason is rarely what homeowners expect. The wrought-iron and tubular steel gates installed across Antelope’s HOA subdivisions during the late 1980s and 1990s are now 25 to 35 years old. The panels often look fine. The problem is almost always at the base, where Tule fog moisture pools at grade on concrete driveways from November through February and eats the bottom hinge and post-mount hardware from the inside out. A typical metal gate repair in Antelope runs $180 to $480, depending on whether we’re replacing hinges, re-plumbing a post, welding a cracked rail, or correcting a sag.
Hinge & Post Repair
Bottom hinge failure is the signature Antelope problem. Cold moisture settles at the concrete surface and sits against the lowest hinge for months at a time while the rest of the gate stays dry. We replace failed hinges with galvanized or stainless hardware and check the post footing, because a hinge that rusts through also lets the post shift. Most hinge and post repairs in Antelope run $220 to $420 per gate.
Gate Realignment
When a gate drags on the concrete or won’t latch, Antelope homeowners often think the gate itself is bent. Usually the hinge post has shifted or a hinge has worn, throwing the whole panel out of plane. We re-plumb the post, replace the worn hardware, and reset the gate so it clears the driveway through the full swing. Realignment work typically costs $180 to $320 in Antelope.
Wood Gate Repair in Antelope
Wood gate repair in Antelope has a different failure clock than metal work. The 100°F-plus summer days dry out wood panels, opening cracks and loosening joints, and then the damp Tule fog winter swells the same boards and pulls everything out of square. That seasonal cycle from June through February is brutal on the 1980s and 1990s wood side-yard gates still standing in Antelope’s older HOA communities. Typical wood gate repair here runs $200 to $550, depending on whether we’re replacing boards, rebuilding the frame, replacing hardware, or all three.
Frame & Panel Repair
Cracked and warped panels are the most visible sign of Antelope’s climate at work. We replace rotted or split boards, tighten the frame, and re-square the gate so it hangs clean. When we rebuild a wood gate frame, we use fasteners and hardware rated for fog-season moisture, not coastal assumptions and not inland assumptions either.
Lock & Latch Repair
A wood gate that won’t latch is a security problem, not a minor annoyance. Antelope’s older wood gates frequently arrive with latch hardware that’s rusted or misaligned from years of seasonal movement. We replace the latch, adjust the strike, and confirm the gate holds closed under pressure. Lock and latch repair on a wood gate in Antelope typically runs $180 to $300.
Trusted Brands We Service in Antelope
We’re factory-trained and authorized on nine major gate and operator brands, and for Antelope customers that matters because the right replacement part is never a guess. We service FAAC and BFT hydraulic and electromechanical operators, Linear and Viking electric gate motors, plus LiftMaster, DoorKing, Elite, Mighty Mule, and Ghost Controls systems. For Antelope homeowners dealing with summer heat stressing operator electronics and winter fog corroding limit switches and housings, we carry the components that hold up. That means a FAAC operator in Antelope gets a genuine FAAC logic board or capacitor, not a universal substitute. We quote the brand-specific part up front, in writing, before we order anything.
Common Gate Repair Problems We See in Antelope Homes
- Bottom hinge corrosion from Tule fog. Antelope’s fog season pools cold moisture on concrete driveways, and the bottom hinge is the first casualty. We see posts that look plumb from the street but are structurally compromised at the base.
- Automatic operator failure from summer heat. Operators mounted in direct Antelope sun in July and August see thermal stress on capacitors, control boards, and gear grease. Failures cluster in late summer, not during the winter when gates are used more.
- Warped and cracked wood panels. The 100°F summer-to-fog-winter cycle splits boards and loosens frame joints in Antelope’s 1980s and 1990s wood side-yard gates. What looks like a hinge problem is often a panel that’s no longer square.
- Rusted-through latch and strike hardware. Antelope’s fog season attacks the latch mechanism before anything else visible, especially on gates that face north or sit in shade. A gate that won’t latch leaves your yard open, and that’s a security issue, not a cosmetic one.
Pricing for Gate Repair in Antelope, CA
Here’s what Antelope homeowners typically pay. Hinge and latch repairs run $180 to $320. Gate realignment and sag correction is $180 to $380. Post re-plumbing and footing work runs $250 to $500 depending on whether concrete needs breaking out. Weld repairs on cracked steel or wrought-iron frames start around $220 and go to $480. Gate motor and operator repair in Antelope typically lands between $250 and $650, with brand-specific parts included. Every job gets a written price before work begins, and the price we quote is the price you pay. No added line items at the end. Call (828) 426-7081 for a free estimate on your specific gate, because the condition of your hinge post, panel, and operator determines where you land inside those ranges.
Our team serviced a 1990s tract home near the Antelope Community Park area where the side-yard swing gate looked straight but dragged on the concrete. The bottom hinge had rusted through and the post footing had shifted. We replaced the galvanized hinge with stainless fixings, re-plumbed the hinge post, and corrected the sag. The gate now clears the driveway through fog season. That job cost the homeowner $380, and it’s the kind of repair Antelope sees constantly.
We Also Serve Cities Near Antelope
Warden Gate Repair handles gate work throughout this corner of Sacramento County. We serve Gate Repair in Antelope as part of our regular North Highlands, Elverta, Rio Linda, and Citrus Heights coverage. If you’re just outside Antelope and dealing with a failing gate, call us. Same team, same pricing, same guarantee.
Serving Antelope, CA - Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Antelope
The bottom hinge and post-mount hardware corrode first because Tule fog season pools cold ground-level moisture on concrete driveways from November through February. Antelope’s fog attacks the lowest hardware while the visible panel stays rust-free, so the gate looks straight until the hinge gives way and it drags or drops. This is the most common failure mode we find in Antelope’s 1980s and 1990s tract communities. If your gate is dragging, call (828) 426-7081 and we’ll tell you whether it’s a hinge, a post, or a panel before we send anyone out.
Yes, and this trips up Antelope homeowners constantly because Antelope is unincorporated, not an incorporated city. Gate permits, height allowances, and setback rules fall under Sacramento County Code, not any municipal ordinance, and almost every Antelope HOA also requires written aesthetic approval before a replacement can proceed. We’ve worked enough Antelope replacements to know both layers, and we’ll tell you which approvals your job needs before you spend a dollar. The written quote covers the gate work; the approval path is something we can walk you through on the phone.
Galvanized and stainless components hold up in Antelope, while zinc-plated and bare mild steel parts fail in three or four fog seasons. For hinges, post brackets, and strike plates on Antelope gates, we specify stainless fixings or hot-dipped galvanized hardware because the winter fog sits at grade and eats everything cheaper. We stock this hardware for Antelope jobs specifically, because the parts that work in San Diego don’t work here.
Safe automatic gate operators have functioning safety edges, properly adjusted force settings, and working photo eyes that reverse the gate on contact or obstruction, and those components are exactly what Antelope’s heat and fog degrade first. If your operator beeps repeatedly, reverses erratically, or runs slowly in hot weather, stop using the automatic function and use manual release until it’s inspected. Automatic gate systems involve high-force moving panels and high-voltage components; diagnosis and repair should be left to a trained professional. Call (828) 426-7081 and we’ll send a named tech with factory training on your brand.
Yes, we service LiftMaster and FAAC operators in Antelope, along with BFT, Linear, Viking, DoorKing, Elite, Mighty Mule, and Ghost Controls. We’re factory-trained on all nine brands and we carry the correct replacement boards, capacitors, and limit switches so the repair isn’t a cross-brand gamble. A typical operator repair in Antelope runs $250 to $650 depending on the part. Call (828) 426-7081 for a written quote on your specific operator.
For gate repair in Antelope, call (828) 426-7081. We’ll give you a real conversation, a written price before any work starts, and the name and photo of the tech coming to your driveway. That’s the whole deal, and it should be the standard everywhere.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Antelope and surrounding Sacramento County communities.





Before
After
Before
After
Before
After