Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Grapevine, TX
Grapevine sits directly on the eastern edge of DFW International Airport, and that changes what a gate company does here. The SH 114 and International Parkway corridor runs hundreds of high-cycle commercial gate operators daily, while residential HOAs built around Grapevine Lake in the 1990s and early 2000s have community gates now reaching the end of their service life all at once. Between the expanding black clay soil that shifts posts and the occasional hard freeze that cracks welds, Grapevine jobs demand more than a parts swapper. They demand someone who has seen what this city does to a gate. Call us at (828) 426-7081 and we’ll talk through what you’re seeing.
Why Grapevine Homes Are Different
Grapevine’s master-planned communities went up fast in the 1990s and early 2000s, and their gated entries were all installed around the same time. That means slide and swing operators across neighborhoods near Grapevine Lake and the SH 26 corridor are now hitting 20 to 25 years of age within a few years of each other. We routinely see control boards that have baked through multiple Texas summers, steel frames with fatigue cracks at the weld points, and operator pads cracked by soil movement underneath.
The soil itself is the quiet culprit in most Grapevine gate failures. North Texas black clay expands when wet and shrinks hard in drought. Gate posts heave and lean, rails drift out of alignment, and a gate that rolled smoothly in March can bind by August. The February 2021 ice event added another layer: slide-gate tracks froze solid, and ornamental iron welds on older Main Street gates popped under freeze-thaw stress. A gate repair call in Grapevine usually isn’t one problem. It’s the operator, the alignment, the soil movement, and the weather all showing up at the same time.
Our Main Grapevine Services
Most calls we take from Grapevine fall into three categories. Each has its own dedicated page for this city.
Gate Repair in Grapevine
Physical gate repair in Grapevine usually means a gate that won’t swing or slide cleanly because the posts have shifted in the black clay or a weld has let go. We work on ornamental iron pedestrian gates in the historic Main Street district, heavy driveway gates in HOA communities, and the beefy commercial slide gates along International Parkway. Every job starts with figuring out why the gate failed, not just forcing it back into place. Read more about Gate Repair in Grapevine.
Electric Gate Repair in Grapevine
Electric gate work here splits into two worlds. Residential systems near Grapevine Lake are mostly light-duty slide and swing operators that run 10 to 20 cycles a day but are now 20-plus years old. Along the airport corridor, we see commercial systems running 300 to 500 cycles daily, which burns out loop detectors and control boards on a compressed timeline. Wiring, safety edges, keypads, photoelectric sensors, and access integrations all fall under this work. See Electric Gate Repair in Grapevine for a deeper look.
Gate Motor Repair in Grapevine
The gate motor, the box that slides or swings your gate automatically, is the most common point of failure we encounter in Grapevine. Capacitors fail after ten hot summers, gearboxes wear, and motors that sat through the 2021 freeze often show corrosion where they didn’t before. We repair and replace motors from FAAC, LiftMaster, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator hums but nothing moves, start with Gate Motor Repair in Grapevine.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Grapevine
We carry parts for FAAC, BFT, Linear, and Viking operators, along with five other major gate brands, in our local service vehicles. That means most Grapevine repairs finish in one visit because the right board or arm is already on the truck. See our brands for the full list and what each system tends to need.
Pricing for Gate Company in Grapevine, TX
| Service | Typical range in Grapevine |
|---|---|
| Service call and on-site diagnosis | $75 – $125 |
| Standard residential gate repair labor | $180 – $385 |
| Ornamental iron repair / welding repair | $250 – $600 per section |
| Aluminum gate frame repair | $220 – $520 |
| Wood gate frame repair | $150 – $400 |
| Automatic gate opener installation | $1,600 – $7,400 |
| Gate sensor (photoelectric / safety loop) replacement | $180 – $460 |
| Wheel and roller replacement | $100 – $300 |
| Post replacement and resetting | $350 – $900 per post |
| Chain drive and gear repair | $140 – $300 |
In Grapevine specifically, prices trend toward the upper half of these ranges when soil movement has pulled posts out of plumb and the alignment has to be corrected before the new operator goes in. Commercial work along International Parkway also runs higher because those systems require loop detector diagnostics and access control work. Whatever the number, you get a written price before the first tool comes off the truck.
Neighborhoods We Serve in Grapevine
We run repair calls across all of Grapevine, from the historic Main Street district to the HOA communities around Grapevine Lake and the commercial properties near the airport. Typical response time in Grapevine is 1 to 3 hours for emergency calls, subject to weather and travel conditions.
- Main Street district
- Lakeview and Oak Grove
- Timberline and Dove Loop
- Silverlake Estates
- Summer Place and SH 26 corridor
Service Area – Cities Near Grapevine
We serve the communities directly surrounding Grapevine, including Southlake, TX, Colleyville, TX, Euless, TX, and Coppell, TX. If your gate is down and you’re in any of these cities, call us and we’ll route the nearest available tech.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Grapevine
For emergency gate failures, we typically reach Grapevine properties within 1 to 3 hours. Non-urgent repairs are usually scheduled same day or next morning. You will always know who is coming and when before the visit.
Many of Grapevine’s HOA communities do require prior approval for visible gate hardware changes, such as replacing an operator arm or changing the gate’s appearance. We provide written specifications for your board and can coordinate with property managers. For emergency safety repairs, most HOAs approve after the fact.
Yes. The hotel, parking, and rental car facilities along International Parkway are a significant share of our work in Grapevine. Those systems run hundreds of cycles daily, and we stock the heavy-duty slide-gate parts and loop detector hardware needed to get them running fast.
If you need gate repair in Grapevine, call (828) 426-7081 for a free estimate. A live person answers around the clock, and we’ll give you a name, a photo, and a written price before any technician sets foot on your property.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grapevine Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.