Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Cleburne
A gate that won’t open or won’t close isn’t just an annoyance in Cleburne, it’s a hole in your fence line and a question mark about who can get in. We repair gates and gate operators across Cleburne, from the historic streets near downtown to the ranchette parcels pushing out toward the Chisholm Trail Parkway. Most repair calls in Cleburne get a same-day or next-day visit, and you’ll never wonder who’s pulling up: every Warden tech is background-checked, identity-verified, and sent to you by name and photo before arrival. Call (828) 426-7081 for a free estimate and a straight answer about what’s wrong.
Why Warden Gate Repair Is Cleburne’s Preferred Gate Repair Company
Cleburne isn’t Dallas. The gates here are different, the soil is different, and the failures are different. We’ve spent enough time on Johnson County properties to know that a gate that sags in September has usually been fighting black clay since spring, not just a loose hinge. That local read is why Cleburne homeowners keep our number handy.
We work on what’s actually in Cleburne: hand-welded pipe gates on old ranchettes, LiftMaster and Ghost Controls openers on new acreage subdivisions, and plenty of 2000s-era automatic gates that installers pulled off the shelf before modern safety sensors were standard. Our team carries welders and fabrication tools on every truck because a meaningful share of Cleburne gate repairs can’t be solved by bolting on stock hardware. The old gate was built different, so the repair has to be too.
Every repair is quoted in writing before any work starts. That’s not a courtesy; it’s the Threshold Standard we’ve run on since opening as part of the Threshold Group in 2008. You get the price, the guarantee, and the name and photo of the tech who’ll be at your gate. Call (828) 426-7081 and a live person answers, any hour, any day.
Metal Gate Repair in Cleburne
Metal Gate Repair in Cleburne means two very different jobs depending on which side of town you’re on. The first is residential ornamental iron and steel driveway gates, usually automated, usually powder-coated, and usually failing at the hinges, posts, or operator mounting. The second is agricultural pipe gates, the kind welded from whatever scrap was on hand twenty or thirty years ago, hanging on pipe posts that the clay has worked out of plumb.
A typical metal gate repair in Cleburne runs $180 to $450 for hinge replacement, realignment, and post reset on a standard driveway gate. Weld repair and custom fabrication push that to $350 to $800 depending on how much of the original frame is sound enough to save. We always give the written number before cutting or welding anything.
Post Reset and Hinge Work
Here’s the Cleburne reality: the black clay swells when it rains and shrinks when it doesn’t, and it doesn’t do either evenly. A steel posts set in concrete will heave and cant, throwing the gate leaf off-plane and binding the hinges. We reset the post footing, shim the gate to plumb, and re-weld or replace hinge tabs as needed rather than just greasing a hinge that’s already failed.
Repairing Hand-Built Pipe Gates
If your gate was welded before digital photos existed, the hinge spacing probably isn’t standard, the post diameter probably isn’t square, and the original builder probably didn’t leave you a schematic. That’s fine. We fabricate replacement tabs, gussets, and hinge pins on-site to match what’s actually there, not what a catalog says should be there.
Wood Gate Repair in Cleburne
Wood Gate Repair in Cleburne almost always comes down to the frame, not the pickets. Homes near the historic downtown with older cedar or redwood gates see rot at the bottom rail and hinge mortises, especially after wet springs. Newer construction on the city’s fringe has the opposite problem: gate frames built light from big-box lumber that warps within two summers of North Texas heat.
Expect to pay $220 to $520 for a typical wood gate repair in Cleburne: replacing a rotted rail, re-hanging with heavier hardware, and squaring the frame back up. Full rebuilds with new frame stock and hardware run $500 to $900. The written price is set before the first screw comes out.
Rot and Rail Replacement
Water sits in the bottom rail and hinge mortise, and once the rail softens, the gate sags no matter how tight the hinges are. We cut out the rotted section, sister in new pressure-treated or cedar stock, and re-hang with hinges rated for the actual gate weight, including the wet-season weight when the wood is soaked.
Warp and Alignment
A gate that scrapes the ground or won’t latch in August has usually dried out unevenly and pulled the frame into a twist. We re-square the frame, add a diagonal brace if it was missing (a lot of Cleburne wood gates skip this), and reset the hinges so the gate closes true in both the heat and the first cold front.
Trusted Brands We Service in Cleburne
We service Gate Repair across the brand mix you’ll find in Cleburne driveways and ranchette entrances: Linear, Viking, Ghost Controls, and DoorKing among them. Our trucks carry brand-specific control boards, remotes, and safety sensor components for common Cleburne-era installs, so the repair doesn’t stall waiting on a part from a warehouse in another state. If your operator is a late-2000s LiftMaster or a DoorKing that’s been through a few freeze-thaw cycles, we can usually tell you on the first call whether it’s a retrofit or a replacement, and what each one costs in Cleburne dollars.
Common Gate Repair Problems We See in Cleburne Homes
- Posts heaved by black clay. The single most common service call in Cleburne. The soil swells with spring rain and shrinks in summer drought, shifting post footings independently and throwing the gate out of plumb before any electrical component fails.
- Ice-cracked welds on legacy pipe gates. North Texas ice storms are hard on old hand-welded gates. Water gets into micro-fractures, freezes, and pops the weld open, especially around hinge tabs and latch posts that were never gusseted.
- Obsolete control boards on 2000s-era operators. A lot of Cleburne automatic gates still run boards that predate modern UL 325 entrapment protection. When those boards die, they can’t take current photocells and edge sensors, which means retrofit or replace, and we’ll give you the straight math on both.
- Non-standard hinge geometry on hand-built entries. Ranchette owners welded gates from whatever scrap was on hand, so hinge spacing and post diameters don’t match anything in a catalog. Repair means fabricating on-site, not bolting on stock hardware.
Pricing for Gate Repair in Cleburne, TX
A straightforward hinge and realignment repair on a residential gate in Cleburne runs $180 to $340. Post reset work, which is common here because of the clay, adds $150 to $300 depending on footing depth and concrete condition. Weld repair and custom fabrication on hand-built or legacy gates runs $350 to $800. Operator board replacement lands between $280 and $600 depending on brand and era.
What moves the number in Cleburne specifically is whether the post footing needs reset, whether the gate needs custom fabrication versus stock hardware, and whether the operator is old enough that safety retrofit components have to be added. You’ll get the written price before any work starts, and the 365-Day Done Right Promise covers the repair in writing. Call (828) 426-7081 for a free estimate.
We Also Serve Cities Near Cleburne
Our Gate Repair in Cleburne coverage extends to the surrounding Johnson County communities and the nearby cities of Keene, Joshua, Alvarado, and Burleson. Same Gate Repair standards, same written price before any work starts, and the same name-and-photo tech at your gate.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Cleburne
The gate looks fine because the gate is fine. What’s moving is the ground under the post. Cleburne sits on expansive black clay that swells after rain and shrinks in drought, and your post footing is being worked loose over time. The gate then sags because its hinge post has moved, not because the gate failed. We fix it by resetting the post, not by propping up the gate. Call (828) 426-7081 and we’ll give you a straight read.
Both are possible, and the answer depends on the board and the safety hardware that’s already on the gate. Older boards often can’t run modern photocells and edge sensors, which means a new board alone won’t bring the gate to UL 325 current safety requirements. Sometimes a retrofit board plus new sensors is the cheaper path. Sometimes a new operator is genuinely the better value. We quote both options in writing and you decide. Call (828) 426-7081 for the exact numbers on your opener.
Yes, and we see it every spring on older pipe gates around Cleburne. Water finds its way into tiny weld flaws and hairline fractures, then a hard freeze expands it and pops the weld open. The failures cluster at hinge tabs, latch posts, and anywhere the original builder skipped a gusset. The repair is a proper re-weld with reinforcement, not a surface patch. Get it done before the next ice season rather than after a gate drops on the ground.
Usually, yes. Out on a 10-acre ranchette near the Chisholm Trail Parkway edge of Cleburne, a homeowner’s LiftMaster swing gate had quit opening after a February ice storm. We found the hinge post canted from clay heave, the rack and pinion bound tight, and a cracked weld on the original hand-built pipe frame. Because the owner had welded the gate himself from scrap with non-standard hinge spacing, we fabricated new hinge tabs on-site from the truck welder, reset the post footing, and had the operator cycling smoothly again the same afternoon. If the pipe itself has rusted through in multiple places, replacement may cost less than chasing every hole. We’ll tell you which situation you’re in before you commit.
That depends on the operator, the sensors, and the condition of the gate itself. Gates built before current UL 325 entrapment protection standards became standard often lack the photocells and edge sensors required to pass, and some legacy boards can’t be upgraded. We start with an honest safety assessment, not a sales pitch. If the gate and operator can be made compliant with sensors and board retrofits, we quote that. If not, we tell you plainly and quote the replacement. Either way you get the written number first.
If you’re in Cleburne and your gate is sagging, stuck, or making a sound it shouldn’t, call (828) 426-7081 for a free estimate. A live person answers 24/7, and before any work starts you’ll have the written price and the name and photo of the tech who’s coming. That’s how we’ve run every job since 2008, and it’s the only way we know to do Gate Repair right.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Cleburne and Johnson County.