Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Weatherford, TX
Gate repair in Weatherford means working on ranch-scale steel and ornamental iron gates that live in clay soil, wind, and caliche dust, not tidy subdivision driveways. Most Weatherford properties sit on 5-to-50-acre parcels where the automatic driveway gate is standard equipment, and Parker County’s shrink-swell clay heaves posts out of square season after season. We’re Warden Gate Repair, and we work on gates across Weatherford with written pricing before any work starts, a technician you’ll know by name and photo before arrival, and a full year guarantee on every repair. Call (828) 426-7081 and a live person answers, any hour.
Why Weatherford Homes Are Different
Weatherford is the Cutting Horse Capital of the World, and that’s not a slogan, it’s a workload. The density of working equestrian ranches and high-end horse properties across Parker County means gates here are built for horse-trailer clearance and daily ranch duty, not curb appeal. We regularly see swing gates with 16-foot and 18-foot leaves on pipe-steel posts, and slide gates spanning 20-plus feet on caliche or decomposed-granite driveways. The scale alone changes the repair: heavier operators, deeper-set hinges, and roller tracks that carry real weight every single day.
Then there’s the soil. Parker County sits on clay-heavy ground that cycles through multi-month droughts and heavy fall and winter rains. That wet-dry swing makes the ground move under gate posts, throwing them out of square and causing operators to bind, chain-drives to skip, and latch posts to drift out of alignment. Add sustained northwest winds across open Cross Timbers terrain, and you get hinge wear and slide-gate stress that sheltered Fort Worth neighborhoods simply don’t see. A Weatherford gate works harder, so we diagnose for the ground, the wind, and the duty cycle, not just the part that failed.
Our Main Weatherford Services
Most Weatherford homeowners call us for one of two things: a gate that won’t open or close reliably, or an operator that’s gone quiet. Each service has its own Weatherford page with local pricing and job detail.
Gate Repair in Weatherford
Ranch gates in Weatherford fail at the post, the hinge, or the roller track long before the operator gives out. A gate that drags on a packed caliche track, a post that’s heaved out of square, a hinge pin that’s wallowed out from wind, or a slide gate that jumps its rail are the calls we run most. We field-repair pipe-steel, ornamental iron, and cantilevered slide gates on acreage properties across Parker County, and every repair carries a written price before we start. For the full rundown, see Gate Repair in Weatherford.
Electric Gate Repair in Weatherford
Electric gate repair in Weatherford usually comes down to one of three things: a safety sensor misaligned by a heaving post, a wire run compromised by ground movement, or an operator fighting a gate that no longer swings free. We trace the low-voltage wiring, test photo eyes and edge sensors, verify the operator’s limits, and correct the mechanical binding that causes most electrical failures. For detail on this work, visit Electric Gate Repair in Weatherford.
Gate Motor Repair in Weatherford
The gate motor, the box that slides or swings your gate automatically, takes the brunt of Weatherford’s conditions. Clay-movement misalignment makes the motor strain, and wind load on a tall ornamental gate makes it strain harder. When a motor burns out, strips a gear, or won’t hold its limits, we replace or rebuild it with factory-trained service on FAAC, BFT, Linear, and Viking equipment. Full details: Gate Motor Repair in Weatherford.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Weatherford
We carry factory service knowledge and common parts for FAAC, BFT, Linear, and Viking operators, which covers the majority of what Weatherford ranch properties run. If you’re unsure what operator you have, we identify it in the field and source the right component fast. See our brands for the full equipment list.
Pricing for Gate Company in Weatherford, TX
| Service | Typical range in Weatherford |
|---|---|
| Gate repair service call and diagnosis | $89 – $149 |
| Hinge replacement on a ranch swing gate | $180 – $340 |
| Slide gate roller replacement | $160 – $290 |
| Gate post re-set and re-square | $350 – $700 |
| Electric gate operator replacement (basic swing) | $900 – $1,800 |
| Gate motor gear or limit-switch rebuild | $275 – $550 |
| Photo eye or safety sensor replacement | $140 – $260 |
| Low-voltage wire repair (short run) | $120 – $250 |
| Track cleaning and roller realignment | $130 – $220 |
What pushes a Weatherford job higher is usually the condition of the ground under the gate, a post that needs re-setting in clay, or a track packed with caliche that has to be dug out before the rollers will roll again. Whatever the number, you’ll see it in writing and agree to it before we touch a tool. No surprise line items at the end.
Neighborhoods We Serve in Weatherford
We work ranch properties from Tin Top to Brock and the acreage developments along the I-20 and US-180 corridors, plus decorative iron gates in HOA subdivisions we see along FM-51 and the newer westside builds. Typical response for a non-emergency Weatherford call is same-day or next-morning scheduling.
- Tin Top
- Brock
- Newberry
- Bennett
- Peaster
Service Area – Cities Near Weatherford
We run Weatherford-based service calls into the surrounding Parker County and westside communities. If you’re in Aledo, TX, Springtown, TX, Azle, TX, or Mineral Wells, TX, we can usually schedule your gate work from the same dispatch. Call and we’ll tell you straight when we can be there.
Serving Weatherford, TX - Our Local Coverage Area
We’re based in the Weatherford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Weatherford
For a gate that won’t open or won’t close, we typically schedule same-day or next-morning service in Weatherford. The call goes to a live person 24/7, so you’ll know exactly when to expect us before you hang up. Call (828) 426-7081.
Most Weatherford HOA subdivisions require approval for gate replacement or major changes, but repairs to existing equipment rarely need it. If your community has rules, we’ll match dimensions and finish so the repair stays compliant. Ask your HOA for the architectural standard before we quote a full replacement.
We serve Weatherford and the surrounding Parker County communities, including Aledo, Springtown, Azle, and Mineral Wells. If you’re on a rural parcel outside city limits, that’s most of our Weatherford work, and we’re equipped for it. Call and give us your cross-street; we’ll confirm coverage in one conversation.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Weatherford Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.