Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across San Antonio
A gate that won’t open, sags into the driveway, or groans against a heaving post is a real problem in San Antonio, and it rarely fixes itself. Gate repair in San Antonio comes down to understanding what the city’s clay soil does to posts and footings, and how the heat-then-freeze cycling punishes hardware. Our crews work across San Antonio every week, from Stone Oak down to King William, and we quote a written price before any work begins. Call (828) 426-7081 and a live person answers, 24 hours a day.
Why Warden Gate Repair Is San Antonio’s Preferred Gate Repair Company
If you live in San Antonio, you already know the city’s soil does not sit still. Houston Black clay swells after rain and shrinks in drought, and that movement is exactly why San Antonio gate repairs so often involve re-setting posts and realigning panels instead of simply swapping a hinge. Warden Gate Repair has served San Antonio homeowners long enough to know which repairs hold and which ones fail again in six months, because Cole Rafferty built the company around one promise: a repair is not done until it stays done through the next big rain and the next hard freeze. Every technician on a San Antonio job is background-checked, identity-verified, and sent with a photo and name to the homeowner before arrival. That is The Threshold Standard, enforced on every visit, no exceptions. Callers reach a live person day or night, never a voicemail tree, and every repair carries the 365-Day Done Right Promise in writing.
Metal Gate Repair in San Antonio
Metal Gate Repair in San Antonio typically involves the custom-welded wrought iron and steel gates you see on older homes in King William, Lavaca, and Alamo Heights, along with the powder-coated aluminum driveway gates common in north-side subdivisions like Stone Oak and Alamo Ranch. The work usually means straightening a sagging panel, re-welding a cracked hinge point, re-setting a tilted post, or freeing hardware that binds in summer heat. In San Antonio, a typical metal gate repair runs $225 – $650 depending on whether we are re-setting a post, cutting and re-welding a joint, or replacing a hinge and latch assembly. A full post replacement with concrete footing runs higher, and we always quote the exact figure in writing before we lift a tool.
Weld Repairs on Wrought Iron
Older ornamental gates in San Antonio’s near-west neighborhoods were often built to non-standard dimensions, so there is no off-the-shelf panel to swap in. Our welders cut out cracked sections, match the original profile as closely as possible, and grind the repair smooth before repainting. On a 1940s courtyard gate in Lavaca, re-welding a snapped lower rail cost less than a full replacement and kept the original scrollwork intact.
Straightening a Sagging Steel Panel
When the hinge post heaves in clay or a weld cracks, the panel drops and drags. We correct the panel at the post rather than shimming the gate itself, because fixing the gate alone fails again in months. Straightening plus realignment typically runs $180 – $400 in San Antonio, and the written price covers the full correction, including re-checking the latch alignment.
Wood Gate Repair in San Antonio
Wood Gate Repair in San Antonio usually means a cedar or pine driveway or side-yard gate that has warped, rotted at the bottom rail, or pulled away from its hinges. San Antonio’s heat dries wood quickly, and the same clay movement that tilts metal posts also torques wood frames until they bind. A typical wood gate repair in San Antonio runs $160 – $380, covering brace re-setting, hinge replacement, and rot section splicing. If the frame is past saving, a full rebuild of a standard 6-foot side gate runs $425 – $750 with hardware.
Resetting a Warped Frame
Wood gates in San Antonio fail most often at the bottom hinge side, where moisture from rain splash and irrigation soaks the end grain. We pull the gate, re-square the frame with a turnbuckle and cable or a new diagonal brace, and reset the hinges on the sound part of the post. This fix works when the frame is intact but racked; if the stiles are rotted through, we recommend a rebuild and say so plainly in the written quote.
Rebuilding a Rotted Gate Section
On older San Antonio homes, the gate often matches the house trim, so keeping the original design matters. We can splice in pressure-treated or cedar sections to match the existing profile, then seal the joints so the next wet season does not open them up. The price includes all hardware and the 365-Day Done Right Promise, so if the repair does not hold through the next flood-drought cycle, the return visit is free.
Trusted Brands We Service in San Antonio
We carry repair parts for the brands San Antonio’s automated gate systems actually run on, including Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. That means our technicians arrive with the correct board, sensor, or arm for your opener instead of ordering a part and making you wait. Our factory training covers all nine brands, and for San Antonio homeowners with HOA-governed entry systems, we stock common loop detector and photo-eye components locally so repair turnaround stays short. You will know the brand of parts going into your gate before we install them, because the written quote names the part.
Common Gate Repair Problems We See in San Antonio Homes
- Heaved hinge posts in expansive clay. After repeated drought-flood cycles, Houston Black and Victoria series clay lifts posts unevenly, so the gate panel binds at the post rather than sagging mid-panel. Re-leveling the post and re-setting the footing is the permanent fix; re-hanging the gate on the same tilted post is not.
- Hardware that binds and sticks through 100°F heat. Steel and aluminum expand in sustained San Antonio heat, and powder-coat finishes degrade under UV, which stresses hinges, latches, and opener arms. The same components then get shocked again through freeze events like Winter Storm Uri, which cracked actuator housings and snapped hinge welds across the city.
- HOA entry systems that lose alignment after flash floods. San Antonio sits in Flash Flood Alley, and heavy downpours saturate and undermine post footings and electrical conduit on automated slide and swing gates in north-side communities. When a loop detector stops sensing a car or the gate loses its closed position, the root cause is usually below grade, not in the control board.
- Caliche and limestone shelf blocking deep post pours. On the northwest side toward Helotes and Leon Valley, crews routinely hit solid caliche or Edwards limestone at 18 to 24 inches when digging post holes. Proper repair there sometimes means carbide-bit augering or surface-mounted brackets instead of a traditional deep footing, and a company that does not know that will under-spec the repair.
Pricing for Gate Repair in San Antonio, FL
Gate repair in San Antonio typically runs $160 – $380 for hinge, latch, and realignment work on a standard driveway or side gate, and $225 – $650 for metal repairs including weld work and post corrections. Post re-setting with a new concrete footing lands between $350 and $900 depending on depth and whether the dig hits caliche shelf. Opener and motor repairs start around $185 for a diagnostic and sensor issue, with full operator replacement running higher. Every San Antonio job gets a written line-item price before work starts, so the number you approve is the number you pay. Estimates are free, whether we schedule the repair or you just want to understand your gate’s condition.
We Also Serve Cities Near San Antonio
Our Gate Repair crews run daily to Wesley Chapel, Dade City, Zephyrhills, and Brooksville, so if you are just outside San Antonio and need a gate fixed, the same written-price, name-and-photo-before-arrival standard applies. Call and we will give you a straight answer on scheduling and cost.
Serving San Antonio, FL - Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Antonio
In San Antonio, re-sagging months after a repair usually means the hinge post is heaving in the expansive clay rather than the gate panel itself failing. Houston Black and Victoria series soils swell with rain and shrink in drought, and each cycle tilts the post a little more, so the panel binds at the post and drops again. We fix this by excavating and re-setting the post footing or installing a deeper or surface-mounted bracket where caliche prevents a deep pour, then realigning the panel and checking latch and sensor positions. A gate repair that fixes only the panel will fail again; correcting the footing is what makes it hold. For a post re-set price in San Antonio, call (828) 426-7081.
Most automated gates in San Antonio have a manual release lever or key on the operator, usually located under a small access cover on the operator box, and pulling it disconnects the motor so you can push the gate open by hand. The exact location varies by brand; on LiftMaster and DoorKing units we service, the release is typically a red or yellow handled lever on the side of the operator chassis. If you are not sure where yours is, call (828) 426-7081 and a live person will walk you through it safely; if you would rather not handle the release yourself, we can dispatch a technician to do it and then re-engage the operator once power returns.
San Antonio’s combination of expansive clay, Flash Flood Alley rainfall, and the Edwards limestone shelf makes gate repair here a different trade than in Houston or Dallas. The clay heaves posts through drought-flood cycles that Houston shares in part but Dallas does not to the same degree, and the northwest side’s caliche and limestone at 18 to 24 inches changes how post footings must be engineered. Add the density of HOA-governed automated entry systems on the north side and the custom-welded ornamental gates in King William and Alamo Heights, and a San Antonio gate repair call often involves three repair disciplines at once: structural, electrical, and welding.
Yes, in most cases a wrought iron or steel gate bent or cracked during Winter Storm Uri can be straightened and re-welded, and we have done that work across San Antonio since the February 2021 freeze. Actuator housings that cracked, hinge welds that snapped, and panels that racked under ice load are all repairable if the steel is not rusted through. We straighten the frame cold where possible, weld any cracked sections, and re-verify the gate’s entrapment protection before it goes back into automatic operation. The written quote tells you whether repair or replacement is the better value before any work begins.
Your gate’s entrapment protection is working when the gate reverses or stops immediately upon encountering a person, vehicle, or object, and when the photo-eye sensors respond to being blocked by reversing the gate’s travel. On a UL 325 compliant automated gate, you should see the gate stop and reverse if a sensor beam is broken while the gate is closing, and the operator should re-check sensor alignment on every cycle in a properly wired system. If your gate does not reverse, makes a grinding sound when blocked, or creeps after a sensor test, call (828) 426-7081 and we will verify the entire entrapment circuit, not just the photo-eye, because safety on an automated gate is the difference between a nuisance and a serious injury.
Call Warden Gate Repair in San Antonio
If your San Antonio gate is sagging, stuck, or making a sound it did not make last month, call (828) 426-7081. You will reach a live person who can schedule a visit, and before the technician arrives you will know exactly who is coming, with a name and photo. The written price comes before any work begins, and the 365-Day Done Right Promise means that if the repair is not right, we return and make it right at no charge. San Antonio’s soil and weather will keep testing gates; your gate repair should be built to hold anyway.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving San Antonio, FL.