Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Arlington?
Most gate repair jobs in Arlington cost between $185 and $850, with the average homeowner paying around $320. Simple fixes like a misaligned latch or a worn roller run $150 – $260, while automatic opener and control board repairs push higher, and full gate motor replacement can reach $1,900. The written price is set before any work starts, so you’ll know the number before a technician touches your gate.
Arlington sits in the heart of the Dallas – Fort Worth metroplex, and that matters for your gate. Between the summer heat that bakes opener housings and the occasional hard freeze that cracks control boards, local gates take a beating. We’ve been working on gates since 2008 as part of the Threshold Group family, and the repairs we see here lean heavily toward heat-related opener failures and shifting hinges caused by North Texas soil movement. If you’re in the Dallas area, see our How Much Does Gate Repair Cost in Dallas, TX? (2026 Price Guide) for nearby pricing.
If you’d rather just get a number for your gate, call (828) 426-7081. A live person answers around the clock, and estimates are free.
Key Takeaways
- Typical Arlington gate repair: $185 – $850.
- Most common repair we see: opener and control board failures from heat and power surges.
- Written price given before any work begins, every time.
- Every repair backed by the 365-Day Done Right Promise.
Gate Repair Cost Breakdown (2026)
Here’s what specific repairs run in the Arlington market. These are real ranges, not national averages – labor rates here reflect DFW metro pricing, and parts availability through the nine brands we service keeps costs predictable.
| Repair Type | Typical Cost Range |
|---|---|
| Gate won’t latch / alignment adjustment | $150 – $260 |
| Hinge, roller, or hardware replacement | $185 – $340 |
| Gate motor (the box that swings or slides your gate) repair | $280 – $650 |
| Control board replacement | $340 – $720 |
| Keypad or remote / receiver replacement | $160 – $320 |
| Safety sensor (photo-eye) repair | $175 – $300 |
| Gate arm or actuator replacement | $450 – $1,100 |
| Full gate motor replacement | $900 – $1,900 |
| After-hours / weekend service | add $75 – $150 |
What drives the price up? Age of the equipment is the biggest factor. A LiftMaster or DoorKing unit that’s 12 years old often needs a board plus a motor, and once you’re into both, replacement can make more financial sense than repair. Gate size and weight matter too – a heavy wrought-iron driveway gate puts more load on every component than a lighter aluminum one, so parts wear faster and replacements cost more.
What keeps it down? Catching problems early. A $175 sensor repair beats a $600 control board every time. And because we carry parts for FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule, we’re not waiting on a special order or paying a markup for a hard-to-find component.
What Affects Gate Repair Pricing in Arlington
- Brand and model. Parts for a popular LiftMaster residential opener are easy to source. A commercial-grade DoorKing or FAAC system uses heavier components with higher price tags. We’re factory-trained on all nine brands we service, so you’re not paying a “we’ve never seen this before” premium.
- Gate type. A single swing gate is the simplest and cheapest to service. A sliding gate adds track and roller wear. A double swing gate doubles the hardware. If you have a dual-gate setup, expect roughly 30 – 40% more than a single.
- Arlington weather cycles. Summer heat expands and stresses opener housings. Winter freezes crack control boards and stiffen grease. Homes near Arlington’s older neighborhoods with mature trees also deal with debris jamming tracks more often.
- Soil movement. North Texas clay soil swells and shrinks with moisture. That shifts gate posts and throws alignment off, which is one of the most common calls we get from homeowners in Arlington.
- Power and surge damage. DFW storms bring surges that fry boards and receivers. If your gate stopped working right after a storm, the diagnosis narrows fast, which can actually save you money on the diagnostic side.
- Access and gate size. A gate mounted at the end of a long driveway or tucked behind landscaping takes longer to service. Time is labor, and labor is the biggest variable in any repair quote.
How to Save on Gate Repair
The single biggest savings move is getting a written price before work starts. That’s standard at Warden – you get the number in writing, and it doesn’t change unless you approve additional work. No surprise line items at the end.
A few more ways to keep costs down:
- Fix small issues before they cascade. A gate that drags because of a worn roller will eventually burn out the motor. A $200 roller swap today saves a $1,200 motor replacement later.
- Get an annual inspection. Catching a failing sensor or a loose hinge during a routine check costs far less than an emergency repair.
- Bundle repairs. If two or three things need attention, having them done in one visit costs less in labor than three separate trips.
- Ask about the 365-Day Done Right Promise. Every repair is guaranteed in writing for a full year. If it fails, we come back and make it right – and the return visit is free. That alone can save you from paying twice for the same problem.
- Call for a free estimate. We give real dollar ranges over the phone for common issues, and a firm written price after we see the gate. Call (828) 426-7081 and a live person will help you figure out what you’re looking at.
FAQs – Gate Repair Cost
How much does gate repair cost in Arlington?
Gate repair in Arlington typically runs $185 to $850, with most homeowners landing around $320. Minor alignment and hardware fixes sit at the low end; motor and control board work sits at the high end. Call (828) 426-7081 for an exact quote – estimates are free.
Is it cheaper to repair or replace my gate opener?
If the repair is under $650, repair almost always wins. Once you’re past $900, replacement usually makes more sense because you’re getting new components and a fresh warranty. We’ll give you both numbers in writing so you can decide without pressure.
Can you fix my gate the same day?
Many common repairs are same-day, especially sensor, remote, and alignment issues, since we stock parts for all nine brands we service. Board and motor replacements sometimes need a return visit depending on the model. Call (828) 426-7081 and we’ll tell you honestly what’s possible today.
Why did my gate stop working after a storm?
Storm surges are the number one cause of control board and receiver failures we see in Arlington, and a board replacement runs $340 – $720. Sometimes it’s just a tripped breaker or a blown fuse, which costs far less. Either way, we’ll diagnose it and give you the written price before any work.
Do you charge extra for weekend or after-hours calls?
Yes, expect an added $75 – $150 for after-hours or weekend service. Our phones are answered by a live person 24/7, so you can call any time and get a real conversation, not a voicemail. Call (828) 426-7081 to check availability.
Who is coming to my gate, and how do I know?
Every Warden technician is background-checked, identity-verified, and photo-badged. Before your appointment, we send you the name and photo of the technician on the way to your home, and they show their ID badge at the door. That’s The Threshold Standard, enforced on every visit. If you’re frequently home alone or have young kids, it’s the difference between a service call and a stressful afternoon. It’s also why we say a warden is someone trusted to watch over a place – that’s the whole idea behind the name.
We specialize exclusively in gate repair, electric gate repair, and gate motor repair. That focus is why we can tell you a real price over the phone instead of a vague “we’ll have to take a look.” Learn more on our home page about how we approach gate work, and browse our city guide for Arlington gate repair pricing if you want the fuller breakdown by brand and gate type.
Pricing reflects the Arlington market as of 2026. Warden Gate Repair offers free estimates – call (828) 426-7081.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Arlington since 2008.
What Our Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.