Ghost Controls Gate Repair in Orlando, FL

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Gate Repair in Orlando, CA | Warden Gate Repair

We provide independent Ghost Controls Gate Repair - Orlando, and the work here is different from anywhere else in Florida because of one thing: more than 100 thunderstorm days a year. A surge-damaged Ghost Controls control board is the single most common service call we run from June through September, and most of those gates are solar-charged, which means the battery usually fails right along with the board. If your Ghost Controls gate stopped working after a storm, call (828) 426-7081 and we’ll diagnose both at once instead of swapping one part and leaving the other to die next week.

Call (828) 426-7081

Warden Gate Repair is an independent gate service company, not affiliated with or authorized by Ghost Controls. That independence means we stock genuine OEM parts and tell you straight when a repair is worth it and when a new kit is the smarter spend. Cole Rafferty, our owner, grew up in a neighborhood where half the driveways had a gate that barely worked, and he built this company on the habit of writing the price down before touching anything. We’ve carried that habit into every Orlando neighborhood we serve, plain and simple.

Why Orlando Residents Choose Us for Ghost Controls Service

Ghost Controls operators are popular here for a reason: they’re one of the most common DIY-to-pro upgrade paths for Orlando’s residential driveway gates. The TSS1 and DTP1 kits are affordable, solar-friendly, and straightforward to install. But when a lightning strike or a corroded hinge turns a well-behaved gate into a mid-travel failure, most homeowners discover that the operator manual doesn’t cover what actually went wrong. That’s where we come in.

We know Ghost Controls control boards, battery behavior, and arm geometry from hundreds of Orlando service calls. We know that a TSS1 on a Dr. Phillips driveway behaves differently than one on a Hunter’s Creek corner lot, because the gate itself, the hinges, the sun exposure, and the storm pattern all shape how the operator wears. We carry genuine Ghost Controls replacement boards, batteries, and limit switches on the truck, so a same-day fix in the middle of a stormy week is something we can actually deliver, not just promise. Every technician we send to your door arrives with a name, a photo, and a written price before any work begins. That’s the Threshold Standard, and we enforce it on every visit, no exceptions.

Common Ghost Controls Gate Repair Problems We Solve in Orlando

  • Lightning-surge damage to the control board. Blown fuses, a dead LCD, or stuck open/close relays after an afternoon thunderstorm. This is the number-one rainy-season call across Lightning Alley, and on solar-charged units the board failure usually drags the battery down with it.
  • Battery failure and swelling on solar-charged Ghost Controls units. In Orlando’s 70%+ year-round humidity, solar batteries swell, lose capacity, and cause the gate to lose travel calibration or stop mid-cycle by late afternoon. We diagnose the board and battery together instead of playing whack-a-mole.
  • Corroded hinge and arm pivot hardware. The Ghost Controls arm itself stays fine, but the aluminum or steel gate it moves rusts and binds in the humidity, which overloads the operator and trips the safety reverse. We free and lubricate the hinge before touching the electronics.
  • Limit-switch and arm-mount drift from thermal expansion. June through September heat causes swing gates to slam, short-stroke, or refuse to latch fully shut. The fix is recalibrating travel limits and re-torquing arm mounts, not replacing the operator.
  • Older operators reaching end-of-life. Many 1990s-era Ghost Controls and other brand operators across Orlando are hitting 25+ years and failing simultaneously. When a third board replacement is on the table, we’ll tell you honestly if a new Ghost Controls kit is the better spend.

Ghost Controls Service in Orlando: What Local Conditions Mean for Your Equipment

Orlando is one of the most gated-community-dense metros in the United States, and our Electric Gate Repair in Orlando covers all of them. Thousands of HOA-governed communities built during the 1990s and 2000s master-planned boom sit in areas like Dr. Phillips, Hunter’s Creek, and Celebration, and then you have a completely different animal in the vacation-rental resort communities southwest of the theme parks: Champions Gate, Reunion, Storey Lake. In those resort neighborhoods, a single gate can cycle 80 to 100 times a day from tourist turnover, compared to 15 to 20 cycles in a typical residential neighborhood. That’s five times the daily wear, all year, on the same Ghost Controls hardware we see in a quiet suburban driveway.

What that means for Ghost Controls owners specifically: surge-damaged control boards after summer afternoon lightning storms are the single most common service call of the rainy season. Technicians who work those resort communities learn quickly that stocking replacement boards for the most common operators on the truck, rather than ordering them, is the difference between a same-day close and losing the job to a competitor. We stock them. The humidity also accelerates rust on hinges, latches, and mounting hardware far faster than in drier parts of the Sun Belt, so a gate that swings fine in Arizona will bind and overload its operator within a few Orlando summers. Every Ghost Controls call we run here starts with the local conditions, because the operator doesn’t fail in a vacuum.

In Dr. Phillips, a homeowner’s Ghost Controls TSS1 single-swing driveway gate stopped mid-travel the day after a July storm. Our tech found a surge-blown control board and a swollen solar battery, and we closed it the same afternoon with an OEM board and battery we keep stocked for summer storm calls. A week later in Hunter’s Creek we fixed the same symptom on a TSS1 where the real culprit was a rusted hinge binding an original 1990s decorative aluminum gate, not the operator, so we freed and lubricated the hinge before touching the electronics. Same operator, same symptom, two completely different repairs. That’s the difference between guessing and knowing.

Ghost Controls Models & Products We Service in Orlando

We service the full Ghost Controls residential lineup here in Orlando. That includes the TSS1 and TSS1U single swing gate opener kits, the DTP1 and DTP1U dual swing kits for paired driveway gates, the AXS and AXP series solar-compatible automatic gate operators, and the TDS2 and TDS2U heavy-duty dual swing kits for wider driveway gates. If you have a Ghost Controls unit we haven’t listed, call us, because we probably service it too.

On the parts side, we have a firm rule: genuine Ghost Controls control boards, batteries, and limit switches only, because aftermarket electronics introduce calibration problems and premature failures we don’t want to stand behind. For arm and hinge hardware, we use quality aftermarket pieces where they match spec, because that’s where the value is and the OEM markup isn’t. On older gates that have reached end-of-life, we’ll tell you plainly when a new Ghost Controls kit is a better spend than chasing a third board replacement. A parts truck that’s stocked for Orlando’s rainy season means we’re not ordering your board while your gate sits open.

Ghost Controls Service Pricing in Orlando

What you’ll pay depends on what actually failed, and we don’t believe in guessing games. A new Ghost Controls control board in Orlando typically runs $200 to $380 in parts depending on the model, and a solar battery replacement adds $120 to $220 when the board failure took it out. Labor runs $95 to $150 for most board, battery, limit switch, and hinge work. If a full operator replacement is the right call, a new Ghost Controls kit plus install lands between $850 and $1,600 depending on gate width, whether you need dual arms, and your power setup. Every single one of those numbers is quoted and agreed in writing before any work starts, because Cole’s rule is simple: write the price down first, everything else follows from there. Call (828) 426-7081 for a free estimate, and we’ll walk through what we think is wrong before we ever schedule the visit.

Serving Orlando, FL - Our Local Coverage Area

We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Orlando

My Ghost Controls gate quit working after a thunderstorm – is the board or the battery the problem?
If your gate stopped working after a lightning storm, the control board is the likely culprit, but on solar-charged units the battery frequently fails at the same time, so we test both during the same visit rather than replacing one part and leaving the other to fail within weeks. In Orlando specifically, where summer storms are a near-daily event, this dual-failure pattern is the norm, not the exception. Call (828) 426-7081 and we’ll diagnose both at once.

Can you service a Ghost Controls operator on my vacation-rental gate in Champions Gate or Storey Lake?
Yes, we service vacation-rental resort gates throughout Champions Gate, Reunion, Storey Lake, and the rest of the theme park corridor. These gates cycle 80 to 100 times a day, far beyond what a residential operator sees, so we prioritize same-day response for rental property managers and owners who can’t afford a gate stuck open through check-in day. Call us directly and we’ll schedule around your turnover calendar.

Do you replace Ghost Controls boards with genuine parts or aftermarket?
We use genuine Ghost Controls replacement control boards, batteries, and limit switches, period. Aftermarket electronics introduce calibration problems and premature failures, and we’re not willing to put our 365-Day Done Right Promise behind a part we know won’t hold up. For arm and hinge hardware, we use quality aftermarket pieces where they match spec, because that’s where the value is.

Are my 1990s-era Orlando community gates compatible with a modern Ghost Controls opener?
In most cases, yes. A 1990s-era ornamental aluminum swing or slide gate, the dominant gate stock in Orlando’s master-planned communities, can usually be retrofitted with a modern Ghost Controls operator, provided the gate itself is sound. The variables are gate weight, hinge condition, and whether the existing mounting posts can accept the new arm geometry. We’ll assess all three and give you a straight answer before recommending a retrofit.

How often should I check my Ghost Controls gate in Orlando’s humidity?
We recommend a visual check at least twice a year in Orlando: once before the summer storm season, and once after. The humidity here corrodes hinges and pivot hardware far faster than in drier climates, and the Lightning Alley surge pattern means boards and batteries should be looked at before the rainy season starts, not after a failure. A 15-minute check is cheaper than a board replacement, and if you call us, the estimate for that check is free.

Service Areas Near Orlando

We run Ghost Controls service across greater Orlando and into the surrounding metro. If you’re in Dr. Phillips, Hunter’s Creek, Celebration, Winter Garden, Kissimmee, or the resort communities of Champions Gate, Reunion, and Storey Lake, we cover your area. If you’re outside the Orlando service area, check our Orlando service area page for full coverage details. If you need Ghost Controls work in other parts of the country, see Ghost Controls service in Newark or Ghost Controls service in Riverside, and for more about the brand itself, visit our Ghost Controls sales & service page.

Book Your Ghost Controls Service in Orlando Today

If your Ghost Controls gate is down after a storm, won’t hold a charge, or binds mid-travel, call Warden Gate Repair at (828) 426-7081. We answer live 24/7, and we’ll give you a written price before any work starts, with same-day availability for storm-related failures during the rainy season. The estimate is free, and the 365-Day Done Right Promise backs every repair we make.

Written by the team at Warden Gate Repair, serving Orlando since 2008.

Need Gate Repair help in Orlando? Licensed & insured · same-day response · free estimates
Call (828) 426-7081
Areas We Serve

Request a Free Estimate in Orlando

Tell us what you need - Warden Gate Repair responds fast. No obligation.

By providing your information above, you agree to the terms of our Privacy Policy and agree that you may be contacted by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Call Now - 24/7 Dispatch