Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Dallas, TX
Warden Gate Repair handles the gate problems Dallas homeowners actually deal with: posts heaved out of alignment by our expansive clay soil, operators cooked by week-long 100°F heat, and drive gates that won’t stay put after a hard freeze. We’re a gate-only company, not a general contractor, and every job starts with a written price before any work begins. Call (828) 426-7081 and you’ll talk to a real person who can tell you exactly who’s coming to your driveway and what it’ll cost.
Why Dallas Homes Are Different
Dallas sits on the Blackland Prairie, and that’s the detail that explains most of our repair calls. The black clay under the city swells hard during spring rains and shrinks in summer drought, heaving gate posts off plumb season after season. In Lake Highlands and Oak Cliff especially, older posts were set with minimal concrete that never accounted for that movement. By late summer it’s routine to find a post racked two or three inches off, dragging the gate leaf across the driveway apron and chewing up the operator’s drive gear. Re-plumbing the post and re-programming the limits on a LiftMaster or FAAC board becomes a seasonal chore.
Layered on top of the soil problem is the heat. From June through September, south- and west-facing pillar mounts get baked all afternoon, and circuit boards, photo eyes, and motor capacitors fail on schedule. The 2021 freeze showed the other extreme: hydraulic operators and keypad wiring across Dallas were never built for sustained cold, and repair schedules ran wild for months. Between the clay and the temperature swings, Dallas gate work is less about replacing a hinge and more about correcting what the ground and the weather did to the structure underneath.
Our Main Dallas Services
Most calls to our Dallas office fall into three buckets: a gate that won’t open or close properly, an electric system that stopped responding, or the motor itself that’s burned out or stripped. Each has its own page below with pricing, local failures, and what the fix involves.
Gate Repair in Dallas
When a gate drags across the driveway or won’t latch, it’s usually structural before it’s mechanical. Dallas clay has pushed the post out, thrown the frame out of square, and now every cycle grinds the hinges and the opener. We re-set posts with concrete deeper than the original, re-plumb the frame, and then address whatever the misalignment damaged. In Preston Hollow and Lakewood, where ornamental iron gates are the norm, this often means welding cracks that formed at the hinge plates. Gate Repair in Dallas covers the full walkthrough and typical pricing.
Electric Gate Repair in Dallas
An electric gate that won’t respond usually points to one of three Dallas-specific culprits: a control board fried by pillar heat, a photo eye knocked out of alignment by a shifting post, or wiring that’s been chewed or weathered. We start with the control system, test the loop detector and safety edges, and trace the power run. Summer heat on an unshaded south-facing pillar is the most common root cause we find across North Dallas. Electric Gate Repair in Dallas explains what a diagnosis looks like and what to expect.
Gate Motor Repair in Dallas
The gate motor – the box that slides or swings your gate automatically – takes the brunt of every misalignment. When the post shifts, the motor strains against the extra friction every single cycle until the gear strips or the capacitor blows. In the 1990s-era master-planned communities of far North Dallas, the original LiftMaster and Elite operators are hitting 20 to 30 years old and failing together. Gate Motor Repair in Dallas covers rebuild-versus-replace decisions and what we stock in the Dallas area.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Dallas
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common boards, gears, and photo eyes are stocked at our Dallas-Fort Worth office, which keeps most repairs moving the same week. See our brands for the full compatibility list.
Pricing for Gate Company in Dallas, TX
| Service | Typical range in Dallas |
|---|---|
| Service call / diagnosis | $89 – $129 |
| Gate post re-set (clay heave correction) | $380 – $650 |
| Gate frame realignment | $260 – $480 |
| Hinge plate weld repair | $180 – $340 |
| Control board replacement (heat-damaged) | $320 – $580 |
| Photo eye replacement & alignment | $150 – $300 |
| Drive gear replacement | $240 – $420 |
| Capacitor replacement (summer burnout) | $120 – $220 |
| Full operator swap (basic residential) | $900 – $1,800 |
| Hydraulic operator repair (post-freeze) | $400 – $750 |
The two things that push a Dallas quote upward are a post that’s moved far enough to need excavation and re-setting, and an operator that’s past repair and ready for full replacement. Whatever the number, you get it in writing before any work starts, and it doesn’t change at the end.
Neighborhoods We Serve in Dallas
Our crews run the full city. Most callers are within a 45-minute response from the Dallas-Fort Worth dispatch office, and emergency calls in the core get there faster than that.
- Preston Hollow
- Lakewood
- Lake Highlands
- Oak Cliff
- North Dallas
Service Area – Cities Near Dallas
Beyond the Dallas city limits, we cover the close-in suburbs where the same clay soil and heat patterns hold: Irving, TX to the west, Duncanville, TX to the southwest, and Balch Springs, TX to the east. We also serve Mesquite, NV for our Nevada neighbors.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dallas
For a gate stuck open or a motor that won’t stop running, we aim for same-day response anywhere in Dallas proper. Call (828) 426-7081 and dispatch will give you a real window, not “sometime after lunch.”
Most repair-only work – replacing a board, re-plumbing a post, swapping an operator – doesn’t trigger a City of Dallas permit. HOA architectural rules are a different story, especially in Prestonwood and Bent Tree. We can tell you what paperwork your specific job needs before we start.
Usually yes, as long as the post is sound and the frame hasn’t cracked through. The original Elite and LiftMaster operators from the 1990s and early 2000s are common in Dallas, and we keep parts for them. If it’s past saving, you’ll get a replacement quote alongside the repair option.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.