Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in La Marque, TX
Warden Gate Repair is the gate company La Marque homeowners call when salt air, storm surge, and shifting clay soil have done a number on their gate hardware. We focus on one trade and one trade only: gate repair, electric gate repair, and gate motor repair. La Marque jobs are different from inland work because the post-Ike rebuild stock from 2009 to 2013 is now hitting failure age all at once, and the corrosion here runs deeper than surface rust. Call (828) 426-7081 and you’ll get a live person, a real conversation, and a written price before any work starts.
Why La Marque Homes Are Different
La Marque sits a few miles from Galveston Bay in one of the lowest-lying communities on the upper Texas Gulf Coast. That geography shows up in every gate we open here. Salt air from the bay blows inland year-round, and combined with the humidity and industrial emissions from the Texas City corridor, it creates a corrosion environment that pits steel frames, eats welds, and seizes hinges faster than almost anywhere else in the Houston metro.
The housing stock compounds the problem. Most La Marque homes are modest 1950s to 1980s ranch-style houses on flat lots, typically enclosed with tubular steel or wrought-iron swing gates. After Hurricane Ike’s storm surge flooded most of the city in 2008, a wave of fence and gate replacements followed between 2009 and 2013. Those installations are now 12 to 15 years old. In this climate, that’s exactly when footings crack, posts lean, and gate motors give out. We routinely find posts set during the post-Ike rebuild that were anchored in saturated or salt-contaminated soil. What looks like a simple hinge repair often turns out to be a post that needs resetting before any new hardware will hold.
Our Main La Marque Services
La Marque homeowners most often call us for two things: a gate that won’t swing or slide properly, and a gate motor that has stopped responding. Each service has its own dedicated La Marque page, linked below.
Gate Repair in La Marque
A La Marque gate takes more abuse in a year than an inland gate takes in five. Hinges rust through, welds crack, posts lean, and latch plates shift out of alignment as the clay soil beneath expands and contracts. We repair the full mechanical side: hinges, welds, posts, frames, latch hardware, and chain-link tension. Before we touch anything, we check the post footings, because so many La Marque posts from the post-Ike era were set in soil that never fully dried. See the full breakdown on our Gate Repair in La Marque page.
Electric Gate Repair in La Marque
Electric gate systems in La Marque face two enemies: salt corrosion on every connection and power surges from Gulf storm weather. Limit switches corrode, photo eyes fog with salt film, keypads fail, and control boards short. We service the full electric side of the system: wiring, keypads, intercoms, safety loops, and power supply, with factory-trained care across FAAC, BFT, Linear, and Viking equipment among others. See the full scope on our Electric Gate Repair in La Marque page.
Gate Motor Repair in La Marque
The gate motor – the box that slides or swings your gate automatically – works harder in La Marque than in almost any Texas suburb. Salt air corrodes internal connections, heat stress kills capacitors, and post-Ike post lean puts the motor’s gear train under constant strain. We diagnose and repair or replace swing and slide motors on all nine brands we carry parts for. See the specifics on our Gate Motor Repair in La Marque page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in La Marque
We carry factory parts for FAAC, BFT, Linear, and Viking, among nine major brands, so most La Marque repairs don’t wait on a parts shipment. Our techs are factory-trained on the specific equipment they’re sent to fix. See the full list on our brands page.
Pricing for Gate Company in La Marque, TX
| Service | Typical range in La Marque |
|---|---|
| Gate service call and diagnostic | $79 – $129 |
| Hinge replacement (single gate) | $150 – $300 |
| Hinge replacement (double gate) | $250 – $500 |
| Welded gate frame repair | $180 – $450 |
| Gate post reset or replacement | $300 – $700 |
| Gate motor replacement (swing) | $600 – $1,200 |
| Gate motor replacement (slide) | $800 – $1,800 |
| Control board replacement | $250 – $550 |
| Keypad or intercom replacement | $180 – $400 |
| Photo eye or safety loop repair | $120 – $300 |
| Full electric gate system replacement | $1,800 – $4,500 |
Two things push La Marque prices toward the upper end of these ranges: post resetting, which is common here because of shifting clay and salt-contaminated footings from the post-Ike rebuild, and heavier corrosion that means more parts need replacing rather than just adjusting. Whatever the job, you get a written price before any work starts, and that price is the price – no surprise line items at the end.
Neighborhoods We Serve in La Marque
We work across the full La Marque city limits, from the older ranch neighborhoods near the center of town to the post-Ike elevated areas further out. Most La Marque jobs can be scheduled within a day or two, and we coordinate dispatch locally from our Houston office.
- Highlands
- Omega Bay
- La Marque North
- Vauthier Addition
- Briarwood
Service Area – Cities Near La Marque
Warden Gate Repair serves La Marque and the surrounding inland and bay-area communities. If your gate is in one of the towns nearby, we cover it the same way: the same written-price promise, the same photo-badged technician, the same 365-Day Done Right Promise. We also serve Hitchcock, TX, Texas City, TX, Santa Fe, TX, and Dickinson, TX.
Serving La Marque, TX - Our Local Coverage Area
We’re based in the La Marque area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in La Marque
Most La Marque calls are scheduled within one to two business days. Same-week availability is common, and our phone line is answered by a live person 24 hours a day, so you’ll never get a voicemail when you call (828) 426-7081 with a gate emergency.
Routine hardware repair and motor replacement typically don’t require a permit. Replacing a full gate structure or resetting posts might, depending on the scope. We can tell you what your specific job requires, and we’ll walk you through the process before any work is scheduled.
Yes. We serve every residential neighborhood within La Marque city limits, including the older ranch communities and the post-Ike rebuild areas. Dispatch is coordinated from our Houston office, with crews based to serve La Marque directly.
If your gate is sagging, stuck, or refusing to open, call Warden Gate Repair at (828) 426-7081. You’ll get a live person, a straight answer, and a written price before any work begins – no surprises, no anonymous technician, just the gate fixed right.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What La Marque Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.