Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Maltby, WA
Gate repair in Maltby, WA usually runs between $185 and $640 depending on whether you’re dealing with a sagging farm gate, a dead opener, or a motor that quit mid-swing. Most Maltby jobs happen on 2 – 10-acre parcels with long driveway entry gates or perimeter gates, which means the work is heavier and the posts are often rooted in clay soil that moves all year. If your gate won’t latch, won’t open, or scrapes the ground every time it swings, call (828) 426-7081 and we’ll send a tech with a written price before any work begins.
Why Maltby Homes Are Different
Maltby is unincorporated Snohomish County, built around rural acreage parcels along corridors like Maltby Road and the surrounding Cascade foothills. These aren’t suburban fence panels. We’re working on long driveway entry gates, horse property perimeter gates, and homestead gates set on wooden posts driven into heavy clay. Maltby’s clay soil holds moisture through the wet season, then heaves when the ground freezes and thaws. The result is chronic post shifting that pulls gate frames out of square and drags latch arms off their strikes.
We also see accelerated rust on hinges, latches, and motor housings because Maltby sits at the base of the foothills and catches significantly more rain than even the regional average. Metal hardware stays damp for months at a time. That’s why recurring realignment and replacement of rusted hardware is a near-annual service need here, not a one-time fix. And because Maltby has no city permitting office, gate and fence work falls under Snohomish County code. We’ve corrected more than a few non-compliant gate setups that sat unnoticed until a property sale forced the issue.
Our Main Maltby Services
Maltby homeowners call us most about two things: gates that have sagged out of alignment on clay-soiled posts, and operators or motors that stopped working after months of Cascade foothills moisture. Each service has its own Maltby page below.
Gate Repair in Maltby
A sagging or dragging gate on a Maltby acreage parcel is usually a post problem as much as a hinge problem. The clay soil heaves, the post leans, and suddenly the latch won’t catch and the gate scrapes the gravel halfway through its swing. We realign frames, reset or replace posts where needed, rebuild latch and hinge hardware, and correct swing so the gate closes true. If your gate is on a slope or set in ground that stays wet from October through May, the fix needs to account for that movement, not just shim the hinge once. See Gate Repair in Maltby for the full scope, pricing, and what to expect from a Maltby visit.
Electric Gate Repair in Maltby
Electric gate systems out here take a beating from rain, moisture, and temperature swings that work their way into wiring, control boards, sensors, and remote receivers. When the gate stops responding to a remote, opens halfway, or reverses for no reason, the culprit is usually moisture intrusion or a misaligned safety sensor. We diagnose the full system: operator, wiring, photo eyes, keypads, remotes, and control board. If the gate has been in service for years through Maltby winters, the failure is rarely one part acting alone. Read the specifics at Electric Gate Repair in Maltby.
Gate Motor Repair in Maltby
The gate motor, which is the box that slides or swings your gate automatically, sits outside in everything: rain, frost, high humidity, and whatever the Cascade foothills throw at it. When a motor burns out or the drive mechanism strips, the gate either won’t move at all or labors and groans through every cycle. We rebuild or replace motors on swing and slide systems, check the drive train, arm, and limit switches, and match the replacement to the weight and travel of your specific gate. Maltby’s long, heavier gates need motors sized correctly from day one. Learn what’s involved at Gate Motor Repair in Maltby.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Maltby
We service and carry parts for the brands most common on Maltby acreage gates, including Viking, Ghost Controls, DoorKing, and Elite. For Maltby’s long, heavy driveway gates, a properly rated opener makes the difference between years of reliable service and early motor failure. See our brands for the full list of what we work on.
Pricing for Gate Company in Maltby, WA
| Service | Typical range in Maltby |
|---|---|
| Gate realignment and latch adjustment | $185 – $320 |
| Hinge and latch replacement | $140 – $280 |
| Post reset or replacement in clay soil | $320 – $640 |
| Gate motor replacement (swing or slide) | $480 – $900 |
| Electric gate diagnostics and wiring repair | $160 – $340 |
| Control board replacement | $290 – $520 |
| Remote and keypad programming | $110 – $210 |
| Photo eye sensor replacement | $130 – $250 |
| Drive chain or belt replacement | $220 – $460 |
| Full system safety inspection | $120 – $200 |
Maltby pricing runs toward the middle-to-upper end of these ranges when posts have heaved badly in clay soil and the job requires resetting footings rather than simple hinge work. You’ll have a written price before any work starts, every time, with no surprise line items added at the end.
Neighborhoods We Serve in Maltby
We cover all of Maltby and the surrounding rural roads where acreage properties cluster. Response time across the area is generally same-day or next-day for repairs, with the fastest scheduling for non-emergency realignment work on weekday mornings. Neighborhoods and roads we serve regularly include:
- Maltby Road corridor
- Yew Way and Echo Lake Road area
- Paradise Lake Road properties
- Snohomish-Cathcart foothill parcels
- Clearview-area acreage (Maltby side)
Service Area – Cities Near Maltby
Our repair crews work throughout Maltby and coordinate dispatch from the brand’s Seattle office. We also serve nearby communities including Seattle, WA, Spokane, WA, Tacoma, WA, and Vancouver, WA. If your gate is on the rural edge of Maltby, call (828) 426-7081 and we’ll confirm coverage directly.
Serving Maltby, WA - Our Local Coverage Area
We’re based in the Maltby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Maltby
We schedule same-day or next-day repair visits across Maltby, including the outlying acreage roads. Realignment and maintenance work usually books within a couple of days, while a gate stuck open or a failed motor gets priority. Call (828) 426-7081 and tell us what the gate is doing, and we’ll give you a straight answer on timing.
Maltby is unincorporated Snohomish County, so gate and fence work falls under county code rather than a city permitting office. Most repairs don’t require a permit, but some full replacements and new automated installations do. We check county requirements before starting any work so you’re not left with an unpermitted setup.
No. The price we quote is the price you pay. Before any work begins, you receive a written price that covers the repair, and we don’t add surprise line items at the end. If we find something unexpected after opening up the gate, we stop and review it with you before proceeding. Call (828) 426-7081 to get your gate priced.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maltby Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.