Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Irving, TX
Gate repair in Irving means working on everything from 1960s chain-link swing gates in North Irving to ornamental iron automated gates in Las Colinas, and the soil underneath all of it is Blackland Prairie clay that keeps tilting posts out of plumb. We’re Warden Gate Repair, and we work exclusively on gates and gate openers, so the truck that shows up carries gate-specific parts, not a general handyman’s tool bag. If your gate won’t open, drags on the ground, or the motor stopped responding, call (828) 426-7081 and you’ll get a written price before any work starts.
Why Irving Homes Are Different
Irving’s Las Colinas district packs corporate-campus security gates and HOA/apartment-complex automated entry gates into a footprint you won’t find anywhere else in the immediate DFW area. On top of that density, every gate sits on expansive clay soil that swells during wet winters and contracts in the summer drought, slowly racking posts out of plumb and throwing operators out of alignment. That means gate work in Irving requires more frequent recalibration than in cities on less reactive soils.
The housing stock splits two ways. Older North and East Irving neighborhoods built between the 1950s and 1970s are full of aging wood and chain-link swing gates that are now rotting or rust-seized. Across the 1990s and 2000s master-planned communities and apartment corridors around Las Colinas, ornamental iron and aluminum automated gates from that era are reaching end-of-life, which drives a steady wave of replacement work. Add summer temperatures routinely above 100°F, and gate operator gearboxes in Irving lose grease faster than the manufacturer’s schedule assumes, shortening service intervals on automated systems.
We also see the State Highway 114 and Las Colinas Urban Center corridors running vehicle-access gates through heavy daily cycle counts from delivery fleets and employee traffic. Commercial operators there commonly hit their manufacturer cycle limits in three to four years rather than the seven to ten years typical of residential installs. Proactive operator replacement is a conversation we have regularly with property managers in Irving.
Our Main Irving Services
The two calls we get most from Irving homeowners are a gate that won’t move at all and a motor that runs but won’t open the gate. Each service has its own Irving page with local pricing and detail.
Gate Repair in Irving
Most Irving gate repairs come down to hinges, posts, or the gate leaf itself. On older North Irving swing gates, we’re usually dealing with rotted wood or rusted chain-link hardware that has been working against swelling clay for decades. In Las Colinas, ornamental iron gates show stress cracks at welded hinge plates when posts shift. We rebuild hinge mounts, rehang dropped leaves, and bring latch and drop-rod hardware back into line. Full detail on Gate Repair in Irving.
Electric Gate Repair in Irving
Electric gate problems in Irving often trace to the control board, safety sensors, or the loop detectors buried in the driveway. Clay movement can separate conduit connections and pinch sensor wiring, which produces faults that come and go. We test the full circuit from board to edge sensor, replace failed photo eyes and loop detectors, and repair damaged wiring runs without tearing up more driveway than necessary. Read the specifics on Electric Gate Repair in Irving.
Gate Motor Repair in Irving
When the gate motor (the box that slides or swings your gate automatically) still hums but won’t move the gate, Irving’s clay soil is usually a silent contributor. Post movement binds the gate against the operator, which overworks the gearbox and burns out capacitors or limit switches faster than normal. We replace worn gears, capacitors, and limit assemblies, then realign the operator to the gate so the repaired motor isn’t fighting the ground. Details on Gate Motor Repair in Irving.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Irving
We carry factory parts for Viking, Ghost Controls, DoorKing, and Elite gate operators, plus the other major brands on our brands page. Stocking locally means most Irving repairs go from diagnosis to fixed in a single visit, without waiting on a parts shipment.
Pricing for Gate Company in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Gate opener motor replacement | $450 – $950 |
| Control board replacement | $250 – $600 |
| Safety sensor (photo eye) replacement | $150 – $350 |
| Hinge replacement (per hinge) | $80 – $200 |
| Gate wheel or roller replacement | $60 – $150 |
| Post realignment and re-set | $250 – $600 |
| Chain or belt replacement | $120 – $300 |
| Keypad or keycard entry system install | $250 – $700 |
| Full operator replacement (residential) | $1,200 – $2,800 |
| Emergency gate release repair | $100 – $250 |
What pushes price up in Irving is usually the soil: a post that has shifted far enough to need excavation and re-setting costs more than a simple hinge swap, because the ground work has to be done right or the gate drifts again next wet season. Whatever the job, the price is written down and agreed before we touch the gate, so there are no surprise line items at the end.
Neighborhoods We Serve in Irving
We run gate repair calls across all of Irving, from the subdivisions of North Irving to the apartment and office corridors of Las Colinas. Our typical response window in Irving is same-day for emergencies and next-day for scheduled repairs.
- Las Colinas
- Valley Ranch
- Heritage District
- University Hills
- South Irving
Service Area – Cities Near Irving
Our Irving crews also cover neighboring DFW communities. We serve Dallas, TX, Balch Springs, TX, and Hutchins, TX regularly. For Nevada-bound clients we also maintain coverage in Mesquite, NV. If you’re not sure whether your address falls in our service area, call and a live person will check it while you’re on the phone.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Irving
Same-day response is available for emergency gate failures across Irving, including Las Colinas and Valley Ranch. Scheduled repairs typically run next-day. Call (828) 426-7081 and we’ll give you a real arrival window, not a four-hour waiting block.
Many Irving HOAs, especially in Las Colinas and Valley Ranch, require an application or color/finish review before gate repair or replacement. We’ll tell you what documentation we can provide for your HOA, and we adjust our work order to match whatever finish spec is on file.
In Irving, yes, often. Blackland Prairie clay swells and shrinks with the seasons, and over time it tilts posts and stresses hinge plates. We check post plumb on every Irving job, even when the original call is for a dead motor or worn hinge, because a misaligned post will undo a fresh repair.
If you have a gate that won’t open, drags, or stopped responding to the keypad, call us at (828) 426-7081. You’ll get a live person, a straight answer, and a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.