Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Alvarado, TX
Alvarado sits where two very different kinds of property meet along I-35W: working acreage with heavy pipe-rail swing gates, and newer subdivisions with automatic driveway openers. What ties them together is the ground underneath. The Blackland Prairie clay that runs through Johnson County expands and contracts with every drought-and-rain cycle, and gates that were installed plumb drift out of square within a season or two. That’s the recurring job here, and it’s why post realignment matters as much as the hinge or opener repair itself. Our Alvarado gate repair starts with a written price before any work begins. Call (828) 426-7081 for a free estimate.
Why Alvarado Homes Are Different
Drive the rural roads east or west of I-35W and you’ll see it immediately: acreage properties with tube-steel gates wide enough for a tractor or a cattle trailer, sitting right next to 2000s-era subdivisions with ornamental iron driveway gates on standard lots. The acreage gates are the heavy end of the work. They carry more weight, take more abuse from wind, and sag harder when a post shifts in the clay. On those same roads, a bent hinge or a gate that won’t latch usually traces back to a post that has tilted two to four inches. Swap the hinge without resetting the post and the gate binds again within a year. Locals here have learned to expect that, so we quote post work upfront when it’s needed.
The other Alvarado factor is ice. Winter ice storms are common in Johnson County, and they freeze automatic gate openers in ways that ordinary cold doesn’t. Frozen limit switches, cracked electromechanical housings, and opener arms seized mid-travel all show up after a hard freeze. Our approach on an Alvarado acreage gate is different from a suburban driveway gate, and the estimate reflects that before we ever touch a hinge.
Our Main Alvarado Services
Most calls we take from Alvarado fall into one of these three categories, and each has its own dedicated page with local pricing detail:
Gate Repair in Alvarado
Steel and iron gates on Alvarado acreage fail in predictable ways: hinges bind when posts shift in the clay, welds crack at stress points after years of wind load, and latch posts lean until the gate no longer catches. We reset posts, re-weld and reinforce, replace hinges and latches, and square gates to the fence line. If the gate is sagging or dragging, see what’s involved on the dedicated Gate Repair in Alvarado page.
Electric Gate Repair in Alvarado
Automatic gates add a layer of failure points: safety sensors, keypads, loop detectors, and control boards. Alvarado’s ice storms and summer heat cycles are hard on outdoor electrical components, and a gate that works fine one day can refuse to open the next. We diagnose the whole system, not just the symptom, and quote the repair before starting. Details are on the Electric Gate Repair in Alvarado page.
Gate Motor Repair in Alvarado
The motor, or gate operator, is the box that actually slides or swings your gate. On a working ranch gate, it cycles dozens of times a day in dust and heat, which wears out gears, capacitors, and limit switches faster than a residential driveway opener. We service and rebuild motors from the brands Alvarado properties actually run, and we stock common parts on the truck. See the Gate Motor Repair in Alvarado page for what a motor job looks like here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Alvarado
We’re factory-trained on the equipment Alvarado gates actually use, including FAAC, BFT, Linear, and Viking. Parts for those brands stay stocked on our service vehicles, which keeps most Alvarado repairs to a single visit instead of a diagnosis trip plus a parts trip. See our brands for the full list.
Pricing for Gate Company in Alvarado, TX
| Service | Typical range in Alvarado |
|---|---|
| Gate post realignment / re-set (single post) | $225 – $420 |
| Hinge replacement (heavy steel or pipe gate) | $160 – $340 |
| Weld repair at stress point | $140 – $310 |
| Latch or drop-rod replacement | $120 – $240 |
| Gate opener / motor repair (parts included) | $285 – $640 |
| Control board replacement | $340 – $780 |
| Safety sensor or photo-eye replacement | $150 – $330 |
| Keypad or intercom troubleshooting and repair | $140 – $310 |
| Limit switch repair and travel adjustment | $130 – $280 |
| Full gate operator replacement (residential) | $1,200 – $2,800 |
On Alvarado acreage, prices push toward the top of these ranges when a post has to be dug out and re-set in expansive clay, or when the gate itself is oversized for livestock and equipment access. Every job gets a written price before work starts, and that price is the price you pay when the gate is back in service.
Neighborhoods We Serve in Alvarado
We cover all of Alvarado City proper and the rural roads running off I-35W and US-67. Most of our acreage work happens along the county roads east and west of the highway, with faster trips to the subdivision parcels closer to town. Typical response time in Alvarado is same-day or next-day for repair calls, depending on where the gate sits and the time of day the call comes in.
- Downtown Alvarado and the older ranch-era streets around it
- Acreage roads east of I-35W toward Grandview
- Acreage roads west of I-35W toward Venus
- Subdivision parcels along County Road 604 and surrounding new builds
- Rural stretches off US-67
Service Area – Cities Near Alvarado
We also run regularly to Keene, TX to the south and Cleburne, TX just below it, which share the same Johnson County clay and the same patterns of gate post movement. To the north, Burleson, TX and Mansfield, TX bring more suburban subdivision gates, and our crews cover those roads the same way we cover Alvarado.
Serving Alvarado, TX - Our Local Coverage Area
We’re based in the Alvarado area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Alvarado
Most Alvarado repair calls are reached same-day or next-day. Acreage properties off the county roads take a little longer to reach than a gate in town, but the scheduling works the same way: we tell you who’s coming by name and photo, and we arrive with the written price ready.
For most repair work and like-for-like opener replacement, no permit is required. If the job involves a new driveway cut or changes to a fence line, the county or HOA may get involved. We’ll flag any of that on the estimate and coordinate as needed, so you don’t discover it mid-job.
Yes. Our quotes are written for the actual condition of the gate and posts on your property. If the post is leaning in the black clay, that work is itemized in the written price before we begin. You’ll know the full number before any part of the repair starts. Call (828) 426-7081 to talk through what you’re seeing.
For a free estimate on any gate, opener, or motor repair in Alvarado, call us at (828) 426-7081. The written price is delivered before any work begins, every time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Alvarado Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.