Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Las Vegas, CA | Warden Gate Repair
We’re an independent Ghost Controls service provider in Las Vegas, and we handle the full range of solar and low-voltage operators this brand makes. What makes Gate Repair in Las Vegas genuinely different for Ghost Controls is the heat: we regularly see boards, batteries, and bushings fail here in ways the manufacturer’s own documentation doesn’t anticipate. If your Ghost Controls gate quit working, call (828) 426-7081 for a free estimate.
We maintain a dedicated bench of OEM Ghost Controls parts and firmware tools, because our techs have repaired hundreds of these systems across the valley’s HOA communities. Ghost Controls builds dependable equipment, but a Las Vegas summer punishes every component. Our Ghost Controls sales & service work covers Solar TSS1 swing kits, TDS2 dual openers, TSG slide operators, and the AXS series, with same-day service in most Las Vegas neighborhoods.
Why Las Vegas Residents Choose Us for Ghost Controls Service
Cole Rafferty, who owns Warden Gate Repair, started working gates in Southern California before bringing that experience to the Las Vegas valley. He spent two decades repairing slide gates, swing gates, and operators from a range of brands, and he built this company on one habit he couldn’t shake: writing the price down before touching anything. His dad always said a man who won’t put it in writing doesn’t believe his own number.
That’s the approach behind every Ghost Controls job we take in Las Vegas service area neighborhoods. We send you the technician’s name and photo before arrival, we quote the repair in writing before work begins, and we back the whole job with our 365-Day Done Right Promise. If the repair isn’t right, we return free of charge to make it right. This is The Threshold Standard we apply to every visit: background-checked, identity-verified, photo-badged techs, every time.
Nobody should have to open a gate without knowing who’s on the other side of it. That’s the whole idea behind a warden, someone trusted to watch over a place and keep it secure. We apply that to your gate, your driveway, and your front entry.
Common Ghost Controls Gate Repair Problems We Solve in Las Vegas
- Solar charge controller failure in 110-115°F heat. Ghost Controls solar controllers are rated for outdoor use, but Las Vegas summer roof and wall temperatures push far beyond what most residential electronics can tolerate. We see controllers that charge fine in the morning and drop out by early afternoon, leaving the gate dead with full sun still on the panel.
- Battery packs dying in the July heat. Batteries hate extreme heat more than anything else. A battery that should last four to five years in a mild climate can fail in two summers here. We test the pack under load before replacing anything else, because a weak battery mimics a bad board.
- Control board and receiver solder fatigue. Repeated thermal cycling from desert days and cool nights causes solder joints to crack on Ghost Controls receiver modules. The symptom is usually intermittent operation: the gate opens sometimes, ignores the remote other times, or trips phantom obstruction faults.
- Heat-expanded steel binding the swing arm bushings. This is a signature Las Vegas failure. A gate perfectly calibrated in the morning binds by midday once the iron expands. The actuator stalls, the operator’s fault logic trips, and the homeowner assumes the board is dead when the real problem is mechanical.
- Keypad and remote programming loss after voltage sag. When solar panels are undersized or partially shaded by HOA walls, the battery voltage sags and the receiver drops programming. We re-program, then address the power supply so the problem doesn’t return next week.
Ghost Controls Service in Las Vegas: What Local Conditions Mean for Your Equipment
In North Las Vegas and the outer edges of the valley, there’s a layer of caliche hardpan, calcium-cemented desert soil that can sit just inches below the surface. It looks like ordinary dirt until you try to dig a post hole. Then it laughs at you. We routinely need carbide bits and a jackhammer to set a new hinge post or operator post to depth. That’s true for any gate brand, but it changes the math on a Ghost Controls swing gate repair specifically, because these operators mount directly to the post. If your post has shifted or failed, we have to factor in caliche excavation before we can even start the mechanical portion of the job.
What looks on paper like a simple dig-and-reset is often half a day of extra labor with carbide tooling. That’s why we price post replacements in North Las Vegas differently than we would in Summerlin or Green Valley. You’re not paying for unnecessary labor. You’re paying for what the ground actually demands. We’d rather tell you that up front than surprise you with it on the invoice.
We saw this play out in Summerlin recently. A homeowner’s Ghost Controls TSS1 solar swing gate started stalling every afternoon at about 80% open. Our tech found the pivot bushings binding from heat-expanded steel, and the solar charge controller had dropped below operating voltage. We replaced the controller, reset the gate stops, and recalibrated the arm travel. The gate has run through two more July afternoons since without a hiccup.
Ghost Controls Models & Products We Service in Las Vegas
We repair the entire Ghost Controls residential line. That includes the TSS1 solar swing gate operator kit, the TDS2 dual swing gate opener, the TSG slide gate operator, and the AXS series solar swing gate openers. We carry OEM Ghost Controls control boards, receivers, and solar charge controllers on our trucks, because Las Vegas homeowners can’t wait a week for a part to ship from a warehouse in Ohio. When a battery or actuator needs replacing, we use quality aftermarket options only when they meet or exceed Ghost Controls’ rated duty cycle. Otherwise, we install OEM.
If your unit is more than a few years old and the board has heat damage, we’ll give you an honest repair-versus-replace comparison. Sinking $400 into a board on a unit that will fail again next July isn’t a repair, it’s a donation. We’d rather tell you the truth and let you decide.
Ghost Controls Service Pricing in Las Vegas
Ghost Controls repair in Las Vegas typically runs $180-$340 for board and receiver work, $150-$300 for battery replacement with testing, and $250-$500 for actuator or swing arm repairs. Post replacement where caliche is present runs higher because of the excavation work. These ranges reflect what we see across Summerlin, Henderson’s Green Valley, Rhodes Ranch, and North Las Vegas.
Every Ghost Controls repair starts with a free estimate. We diagnose the problem, write down the price, and get your approval before any work starts. That’s the rule, no exceptions. Call (828) 426-7081 for your free estimate, and you’ll know the number before we touch a single screw.
Serving Las Vegas, NV - Our Local Coverage Area
We’re based in the Las Vegas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Las Vegas
Because the steel and the electronics are both reacting to the heat. The metal expands enough by midday to bind the swing arm bushings or gate hinges, and the solar charge controller or battery may be dropping below operating voltage as temperatures peak. We test both the mechanical and electrical sides to find which one is actually failing on your Electric Gate Repair - Las Vegas service call. Call (828) 426-7081 if your gate is doing this, and we’ll diagnose it.
It can, but it won’t be reliable. Without battery backup, the operator relies entirely on direct solar output, which drops on overcast days and in shaded HOA wall installations. In Las Vegas heat, the battery also acts as a buffer against voltage sag. We recommend battery backup on every solar Ghost Controls system here. It’s the difference between a gate that works and a gate that works when you need it.
Yes. We handle the operator and the internal components, which don’t affect the visible hardware. If the HOA requires specific gate styles or finishes, we source compliant parts or coordinate with your board before any visible components get replaced. Summerlin, Seven Hills, and Rhodes Ranch all have CC&Rs we’re familiar with. We’ll make sure the repair is compliant.
A heat-damaged board typically shows intermittent behavior: it works sometimes, reboots randomly, or fails only at peak afternoon temperatures. A simple reset clears the fault temporarily. We test the board under load and inspect for solder fatigue before recommending replacement. If you’re not sure, call us, and we’ll test it rather than guess.
Yes, and we’re honest about what that costs. Caliche hardpan can sit just inches below grade in North Las Vegas, so a post reset that looks simple often requires carbide bits and a jackhammer. We’ll tell you what the ground is likely to demand when we give the estimate, not after we start digging. Call (828) 426-7081 for a free estimate on your North Las Vegas property.
Service Areas Near Las Vegas
Beyond Las Vegas proper, we handle Ghost Controls repair in Henderson, North Las Vegas, Summerlin, Green Valley, and surrounding HOA communities. If you’re closer to Ghost Controls service in Fresno or Ghost Controls service in Sacramento, we can point you to our sister locations there.
Book Your Ghost Controls Service in Las Vegas Today
Call (828) 426-7081 for a free estimate. Same-day Ghost Controls repair is available in most Las Vegas neighborhoods. We’ll confirm the technician’s name and photo before arrival, and you’ll have your written price before any work starts. That’s how we do it.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Las Vegas since 2008.