Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Converse
Electric gate repair in Converse typically runs $180 – $340 for common opener and alignment fixes, and most calls are completed the same day we diagnose them. If your swing gate is dragging on the driveway off FM 1516 or a slide gate on a Foster Road property won’t budge, the problem is rarely just the motor. It’s usually the gate itself, the post footing, or a control board that’s been fighting Converse’s Blackland Prairie clay for 20 years. Call (828) 426-7081 and we’ll send a named, photo-badged tech with a written price before any work starts.
Why Warden Gate Repair Is Converse’s Preferred Electric Gate Repair Company
Converse is a unique market for gate work. The housing stock skews to 1990s and early 2000s tract subdivisions built around JBSA-Randolph, which means the gates we service are hitting their end-of-life window simultaneously. We’ve worked on LiftMaster, FAAC, BFT, and Linear operators throughout Converse long enough to know which failures are seasonal soil movement and which are genuine component failure. That distinction saves Converse homeowners real money, because throwing a new opener at a gate with a heaved post doesn’t fix anything.
Our Electric Gate Repair team carries the parts for older operators that other companies write off as obsolete. And when we dispatch to Converse, you’re not getting an anonymous tech in a van. Every technician is background-checked, identity-verified, photo-badged, and sent to you by name and photo before arrival. That’s the Threshold Standard, and it’s enforced on every single visit. Cole Rafferty, who leads our repair operation, holds every tech to it.
Response time to Converse from our San Antonio dispatch office is typically under an hour for emergency calls. Every job includes a written price delivered before work begins, and the 365-Day Done Right Promise in writing: if the repair isn’t right, the return visit is free.
Commercial Gate Operator in Converse
Commercial gate operators in Converse serve a different clientele than most of the San Antonio metro, partly because of how many small commercial properties and multi-tenant lots sit near the base and along the FM 1516 corridor. A commercial slide gate operator repair here typically runs $450 – $1,200 depending on whether it’s a control board swap, a loop detector replacement, or a full operator retrofit. The job involves diagnosing the operator’s motor, drive chain or belt, control board, and safety devices, then rebuilding or replacing only what’s failed.
Loop Detector and Safety Edge Failures
We get a lot of calls from Converse commercial properties where the gate opens and closes on its own, or won’t hold open for a delivery truck. Usually it’s the loop detector in the driveway, or a failing safety edge. Converse’s clay soil expands and contracts with moisture, which can crack the saw cut where the loop wire sits and break continuity. We test the loop, re-cut and re-seal the channel if needed, and re-tune the detector.
Operator Retrofit vs. Full Replacement
On a commercial operator that’s 15 – 20 years old, a full control board replacement can cost $600 – $900. If the motor itself is still solid, that’s often the right call. We’ll tell you honestly when a full operator swap makes more sense than pouring money into an obsolete board that won’t accept modern entrapment protection. You’ll always get a written price and our recommendation before any work begins.
Gate Opener Repair in Converse
Gate opener repair in Converse homes usually comes down to one of three things: the operator’s limit positions have drifted out of alignment, the control board has failed, or the gate itself has moved and is forcing the opener to work too hard. A residential opener repair here typically runs $180 – $340, and we treat most of these as same-day jobs. The opener itself, the box that slides or swings your gate automatically, is often working harder than it should be because the gate’s geometry has shifted.
Limit Switch and Rack Alignment
When a Converse swing gate drags or a slide gate stops short, the first thing we check is whether the gate’s posts have moved. Blackland Prairie clay shrinks in drought and heaves after rain, cycling posts out of plumb year after year. That throws off the operator’s limit positions and can knock a rack and pinion out of mesh. Re-setting the post and re-aligning the operator fixes the root cause, not just the symptom.
Control Board Diagnostics
Older 1990s operators often have control boards that weren’t designed for modern safety requirements. If the board fails, we can sometimes source a compatible replacement. On some legacy units, the board is simply obsolete and won’t accept photocells or edge sensors. We’ll walk you through whether a board swap makes sense or a new opener is the cheaper long-term answer.
Trusted Brands We Service in Converse
We’re factory-trained on nine major gate and opener brands, and for Converse customers we commonly work on FAAC and BFT swing gate operators, Linear slide gate systems, and Viking commercial operators. Because Converse has so many 1990s-era installations, we keep a deeper stock of legacy control boards and limit switches than a generalist shop would. That means faster turnaround when your FAAC board fails or a BFT limit switch gives out, without waiting a week for a part to ship. Our techs know these systems inside out, and the right parts show up with the right knowledge on the first visit.
Common Electric Gate Repair Problems We See in Converse Homes
- Hinge posts heaved out of plumb from clay soil movement. Converse sits on the eastern margin of the Blackland Prairie, where expansive clay shrinks hard during drought and heaves when rain returns. A gate that dragged fine for years suddenly binds at the hinge post, and the opener trips on overload.
- Rotted wood posts and rusted galvanized hinges on 1990s tract homes. Subdivisions along FM 1516 and Foster Road were built fast in the late 90s, and much of that original hardware is now 20 – 25 years old. Posts rot at the soil line from clay-moisture cycling, gates sag, and latches stop catching.
- Legacy control boards without working safety photocells or edge sensors. Pre-UL 325 operators lack modern entrapment protection, which is both a code issue and a safety issue. Obsolete boards often can’t accept photocells without a full operator swap.
- Dead openers that are actually misaligned gates, not failed motors. When a gate frame racks out of square from years of soil movement, the rack and pinion loses mesh and the operator draws excess current until it overheats or trips. Replacing the opener without fixing the gate just burns up another motor.
Pricing for Electric Gate Repair in Converse, TX
Here’s what Converse homeowners can expect to pay for common electric gate repairs:
- Gate motor (opener) repair: $180 – $340
- Control board replacement: $250 – $500
- Keypad or remote control programming and repair: $95 – $225
- Safety sensor (photocell or edge) replacement: $150 – $380
- Post re-setting and gate re-alignment: $250 – $600 depending on footing condition
- Commercial gate operator repair: $450 – $1,200
You’ll get a written price before any work starts, every time. If something changes once we open the operator or dig down to the post footing, we stop and talk to you first. No surprise line items at the end. Call (828) 426-7081 for a free estimate and we’ll give you a real number, not a vague range.
We Also Serve Cities Near Converse
Our Electric Gate Repair in Converse service area extends to Universal City, Schertz, Cibolo, and parts of northeast San Antonio. If your property sits near the base or along the FM 1516 corridor, give us a call and we’ll confirm coverage and dispatch timing.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Converse
In Converse, the answer is usually the gate, not the opener. Dry summers shrink the Blackland Prairie clay under your gate posts, pulling them out of plumb. The gate starts dragging, the rack and pinion loses mesh, and the opener trips on overload or stops responding entirely. We check the post footing and gate alignment before we ever condemn the motor. Call (828) 426-7081 and we’ll diagnose it properly.
Most don’t. Operators installed before the UL 325 standard went into effect lack working photocells and edge sensors, which means the gate can’t detect a person or a vehicle in its path and reverse. That’s a genuine safety issue, especially on gates near sidewalks or where kids play. We can retrofit modern entrapment protection on some boards, but obsolete control boards often require a full operator swap to bring the gate up to code.
Not necessarily. We were called to a home off FM 1516 where the original 1990s LiftMaster operator had stopped responding and the swing gate was dragging on the driveway. The hinge post had heaved out of plumb from years of clay-moisture cycling, throwing the rack and pinion out of mesh. We re-set the post footing, re-squared the gate frame, and re-aligned the operator’s limits. The LiftMaster ran clean after that, and we didn’t have to sell the owner a new opener. We’ll always check the gate first.
Converse’s expansive clay soil cracks the saw cut where the loop wire is buried, especially after dry spells. That breaks continuity and causes phantom triggers, where the gate opens for no vehicle or won’t hold open when one is present. We test the loop, re-cut the channel if the wire is broken, and re-tune the detector. On a commercial operator, this repair typically runs $300 – $600 including the detector if replacement is needed.
Yes. We’re factory-trained on LiftMaster, FAAC, DoorKing, and six other major brands, and we keep legacy parts in stock for the 1990s-era operators that are common across Converse. Call (828) 426-7081 for a free estimate. You’ll get a written price before any work begins, backed by the 365-Day Done Right Promise.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Converse and the surrounding San Antonio metro.