Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Frederickson
Electric gate repair in Frederickson typically runs $180 to $340 for most motor, hinge, and control board fixes, with same-day service available in many cases. That’s the honest range we quote before any work starts. Warden Gate Repair has been answering calls from Frederickson homeowners since 2008, and we know this area’s gates fail in specific, predictable ways that a generic repair outfit from Seattle or Tacoma often misses - that’s why homeowners trust our Gate Repair in Frederickson. Call (828) 426-7081 for a free estimate, and we’ll have a background-checked, photo-badged technician at your gate, usually within a few hours.
Why Warden Gate Repair Is Frederickson’s Preferred Electric Gate Repair Company
Frederickson isn’t a typical residential suburb. It’s Pierce County’s industrial backbone, with Boeing’s 737 fuselage plant and a dense cluster of aerospace suppliers sitting shoulder to shoulder with subdivisions built on former farmland. That means our techs here handle everything from a homeowner’s sagging swing gate to a commercial slide operator on a secured industrial yard, often in the same day. We carry parts that match what’s actually installed in this market, not just what’s easiest to stock. That local focus shows up in the reviews Frederickson customers leave: they mention arriving on time, the written price being the final price, and the tech explaining what failed before touching a single bolt.
We’re authorized service providers for FAAC, BFT, Linear, and Viking, four of the most common operators on Frederickson properties. We schedule from our Seattle office and dispatch crews directly into Frederickson. Response time runs under 90 minutes for emergency calls in most of the area, and calls are answered by a live person 24 hours a day, every day. That matters at 5:45 a.m. when the gate won’t open and you can’t get to work at the plant.
Gate Access Control in Frederickson
Gate Access Control in Frederickson addresses a problem this city knows better than most: a gate that opens for anyone is a gate that isn’t doing its job. The work involves keypads, card readers, intercom systems, safety photocells, and the control boards that tie them together. A Frederickson homeowner typically needs this when a keypad fails, when they want to add a second entry code, or when a gate installed with no automation finally gets upgraded to keypad entry. Expect to pay $220 to $480 for a keypad replacement or new install, $150 to $300 for a photocell repair, and $280 to $650 for a control board diagnosis and replacement, depending on the operator.
Keypad and Intercom Repair
Keypads on Frederickson gates fail most often from water intrusion, not wear. The South Puget Sound climate delivers over 45 inches of rain annually, and a keypad that isn’t sealed properly will short out within two or three wet seasons. We stock weather-rated keypads built for exactly this climate and replace the gasket and housing, not just the circuit board.
Safety Sensor and Photocell Work
Photocells and safety edges exist to stop the gate before it hits a person or vehicle. In Frederickson’s industrial and residential mix, we service both the simple garage-door-style sensors on residential gates and the heavier safety loops cut into asphalt on commercial entries. If a sensor is misaligned, we re-align it. If it’s dead, we replace it and test the entire entrapment protection circuit before leaving.
Commercial Gate Operator in Frederickson
Commercial Gate Operator work in Frederickson is not a scaled-up residential job. The aerospace corridor and industrial parks here run heavy slide gates, cantilever gates, and barrier arms that open and close hundreds of times a day. A Frederickson commercial property typically calls us when an operator motor burns out, a limit switch stops the gate mid-travel, or a rack and pinion drive strips teeth. Commercial operator replacement runs $850 to $2,400 depending on gate weight, duty cycle, and whether the operator is slide, swing, or barrier-arm style. A motor-only replacement runs $400 to $900. We quote the number before we order any part.
Heavy-Duty Operator Replacement
We spec commercial operators for cycle count, not just gate length. A Boeing supplier gate that cycles 300 times a shift needs a different motor than a residential gate that opens four times a day. We don’t sell a homeowner-grade operator into an industrial setting, and we don’t oversell an industrial unit to a homeowner.
Access Control Integration for Industrial Yards
Many Frederickson industrial gates already have some form of access control: card readers, vehicle loops, or manned gate stations. When we replace a commercial operator, we integrate the existing access system rather than ripping it out. That saves real money on a job the building owner shouldn’t have to re-buy.
Trusted Brands We Service in Frederickson
Warden Gate Repair is factory-trained and authorized on the brands Frederickson properties actually use: FAAC, BFT, Linear, and Viking, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common circuit boards, limit switches, keypads, remotes, and safety sensors for these brands in our local service vehicles, so a repair doesn’t turn into a two-week wait for a part. If your operator is one we don’t service, we’ll tell you on the phone before you spend a dime.
Common Electric Gate Repair Problems We See in Frederickson Homes
- Builder-grade operators at the end of their life. Frederickson’s residential gates were mostly installed during the late-1990s to 2010s building boom, and those builder-spec operators are now 15 to 25 years old. Motors and control boards are failing right on schedule.
- Clay-soil post heave knocking gates out of plumb. Frederickson sits on expansive clay-heavy former agricultural lowland. Waterlogged soil expands and shoves hinge posts several inches out of alignment through the wet season, so a gate that swung clean in August binds and drags by January.
- Manual gates retrofitted with automation and no power run. Many Frederickson subdivision gates were installed as manual swing or slide gates. When homeowners finally automate them, the trenching and conduit the builder should have put in simply isn’t there, and an electrician or gate company has to run surface conduit or cut a trench.
- Rack and pinion misalignment on slide gates. When a post heaves, the slide-gate rack pulls away from the pinion gear. The motor strains, teeth strip, and the gate shudders to a stop. We re-set the post and re-align the rack, because replacing the gear without fixing the post guarantees a repeat failure.
Pricing for Electric Gate Repair in Frederickson, WA
Here are real numbers for Frederickson, not national averages. A gate motor replacement runs $350 to $800. Hinge repair or replacement on a sagging swing gate runs $180 to $450 per hinge. A keypad replacement runs $220 to $480. A control board replacement runs $280 to $650. A full commercial operator replacement runs $850 to $2,400. What moves a job within those ranges: gate weight, access to the site, and whether existing posts can be re-used. The written price you receive is the price you pay, and the 365-Day Done Right Promise means if the repair fails, the return visit is free. Call (828) 426-7081 for a free estimate on your specific gate.
We Also Serve Cities Near Frederickson
Beyond Frederickson, our techs cover Electric Gate Repair throughout the South Sound and beyond, including Tacoma, Seattle, Vancouver, and Spokane. If you’re just outside Frederickson, call us; dispatch will tell you honestly whether we can reach you same day. We also serve the broader Frederickson area, including the industrial parks and subdivisions east of the Boeing plant.
Serving Frederickson, WA - Our Local Coverage Area
We’re based in the Frederickson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Frederickson
Frederickson’s expansive clay soil absorbs heavy winter rain and heaves, pushing hinge posts several inches out of alignment. The gate panel itself usually hasn’t warped; the post it hangs from has moved. That’s why our techs set hinge-post footings deeper than standard Pierce County code minimum here: it reduces the seasonal callback rate substantially. If your gate is already binding, we re-set the post, re-plumb the hinges, and re-level the operator arm. Call (828) 426-7081, and we’ll tell you over the phone whether it sounds like a post-heave issue or a motor problem.
Yes, and this is one of the most common jobs we do in Frederickson’s late-1990s and 2000s subdivisions. If the builder never ran conduit to the gate, we surface-mount or trench a new power run, install the operator, and add keypad or remote control access as requested. A full retrofit typically runs $1,500 to $3,200 depending on the power run distance, gate weight, and operator brand. We quote the entire job, including the trenching and electrical, before any work starts.
Usually not. On most Frederickson gates, the panel hasn’t failed; the hinge post has heaved or rotted at grade, and the panel is just following it. Replacing the panel without re-setting the post wastes your money. We inspect the post footings first, and if the post needs to come out and get re-set deeper, that’s the fix we’ll recommend. In a late-1990s vinyl-fenced subdivision off 176th Street East, our tech answered a call on a 20-year-old LiftMaster swing gate that dragged by January after swinging clean in August. The hinge post had heaved out of plumb, not the panel, so we re-set the post footing, re-plumbed the gate, and re-leveled the operator arm.
Yes. Heavy industrial gates cycle hundreds of times a day versus four or five times for a residential gate, so the motor, limit switches, and drive mechanism are spec’d for duty cycle, not just weight. We replace commercial operators with units rated for the actual cycle count and integrate existing card readers and vehicle loops rather than discarding them. That’s standard practice on the aerospace corridor, and it’s work we handle as part of our Electric Gate Repair service.
Current UL 325 standards require automatic gates to have two independent means of entrapment protection: typically a safety photocell or contact edge plus an inherent reversal feature in the operator. If your Frederickson gate was installed before the standard tightened, or if a previous repair bypassed a sensor, you may not be covered. We test every safety circuit on every repair and won’t leave a gate operating without proper entrapment protection. It costs $150 to $300 to add a missing photocell, and the test itself is part of every service call.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Frederickson since 2008.