Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Keene
Electric gate repair in Keene usually runs $175 to $485 for most service calls, with the fix depending on whether the problem is a gate motor, a warped gate panel, or a post that shifted in our local clay. Most repairs are completed the same day the technician arrives. We quote a written price before any work starts, so you know the number before a wrench turns. Call (828) 426-7081 for a free estimate and a real person on the line.
Keene’s spread-out lots and long driveways mean your gate is often the first line of security for your whole property. When it won’t open, won’t latch, or drags across the ground after a rain, you need someone who knows the Blackland Prairie soil movement and the heavy-duty operators that serve wide farm entrances. That’s what we do. Our crews work Keene daily and carry post-plumbing equipment on the truck year-round because they expect to use it.
Why Warden Gate Repair Is Keene’s Preferred Electric Gate Repair Company
Most gate repair companies send an anonymous tech with a vague estimate. Warden was built to fix that. Cole Rafferty founded the company in 2008 inside the Threshold Group family, focused on one trade: gates and gate openers. Not fencing, not general handyman work. Just the gate, the motor, the keypad, the sensor, the board. When we say we’ve seen a problem, we’ve seen it hundreds of times.
Before any visit, you receive the technician’s name and photo. When they arrive, they show a photo ID badge at the door. That’s the Threshold Standard, and it’s enforced on every visit. We know many Keene homeowners are home alone, have young children, or are older and careful about who comes onto the property. The name and photo arrive before the truck does, and the written price arrives before any work begins.
Every repair is covered by the 365-Day Done Right Promise. If the repair fails within a year, the return visit is free. That’s in writing, not a verbal maybe. And calls are answered by a live person 24/7. No voicemail, no chatbot, no hold music that leads nowhere. A real conversation, any hour.
Automatic Gate Repair in Keene
Automatic Gate Repair in Keene means restoring a gate that is supposed to open and close on its own, and currently doesn’t. On Johnson County acreage and quarter-acre-plus lots, this often involves a gate motor that runs fine but a gate panel that drags on clay-heaved ground, or a hinge post that has drifted out of plumb and no longer lets the latch catch. The repair may be electrical, mechanical, or both. We diagnose the full system before replacing anything.
Keene homeowners call us for automatic gate repair when the gate moves halfway and stops, when the motor hums but nothing moves, or when the safety photocell refuses to let the gate close. The operator is sometimes blamed when the real culprit is the post below it. We check for post movement first on nearly every call because the local soil makes it that common.
Post Re-Plumbing Is Not An Upsell Here
On clay-heavy lots across Keene, a rain following a dry spell makes the soil expand enough to push a gate post out of level. The result is a gate that scrapes the drive or won’t latch even though the motor tests fine. We keep post-plumbing equipment on every truck because we expect to reset at least one footing.
Operator Diagnostics Before Parts Swap
We test the motor arm, rack and pinion, control board, and safety sensors before recommending a replacement. On wide farm entrances and long driveway gates, the load on an undersized operator is a common source of repeated failures. We match the operator to the gate’s actual weight and span.
Electric Gate Motor in Keene
Electric Gate Motor replacement in Keene is a job we see frequently on larger properties where a gate is heavy, wide, or both. The motor is the box that slides or swings your gate automatically. When it strains, clicks, or burns out, the gate becomes a manual push-pull, which on a 16-foot farm gate is no small task. We install and program motors sized for Keene’s rural entrances, not just the light residential units a big-box store sells.
Signs you need a new gate motor: the motor runs but the gate doesn’t move, the unit trips its breaker repeatedly, or you hear grinding from the gear train. On acreage properties, an undersized motor also fails early because it works harder against wind load and gate weight. We quote the motor, the labor, and any rail or bracket work as one written price before starting.
Solar-Ready Motors For Long Driveways
Many Keene properties have gates far from house power, where running conduit is expensive or impractical. A solar-ready motor with a properly sized battery array is often the right call. We install and wire these systems for reliable operation through North Texas heat and the occasional hard freeze.
Heavy-Duty Operators For Wide Farm Gates
A tube-steel farm gate on a 20-foot opening needs a heavier operator than a suburban driveway gate. We install heavy-duty slide and swing operators rated for that load, with proper limit switches and a strong rack-and-pinion or chain drive. Undersizing an operator here just means buying the same job twice.
Trusted Brands We Service in Keene
Our factory training covers nine major gate and opener brands, and the ones we see most often on Keene properties are Viking, Ghost Controls, and DoorKing. Viking and DoorKing are common on larger farm and commercial-style entrances, while Ghost Controls powers many newer residential solar installs. We also service Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We keep common boards, sensors, and remote units in local stock so a Keene repair doesn’t wait on a part shipped from out of state. The right part and the right knowledge arrive together.
Common Electric Gate Repair Problems We See in Keene Homes
- Clay-heave post movement. After a rain following a dry spell, the Blackland Prairie soil swells and pushes gate posts out of plumb. The gate drags or won’t latch even though the motor runs fine. We reset the post and re-level the gate, and the operator keeps working.
- Freeze-cracked gear housings. A hard freeze like February 2021 cracks plastic gear housings and seizes operators that weren’t winterized. We replace the damaged drive components and advise on a simple seasonal check that prevents a repeat.
- Warped wooden gate boards. Keene summers over 100°F bow wide wooden gate panels and degrade rubber seals on automatic openers. The warped panel overloads the motor and throws off the safety sensors. We straighten or replace the panel and recalibrate the operator.
- Entrapment protection faults. On gates that stop closing and reverse for no visible reason, the safety photocell or edge sensor is often out of alignment or failed. This is a genuine safety system, not an annoyance. We test it and replace it when needed.
Pricing for Electric Gate Repair in Keene, TX
In Keene, a standard electric gate repair call runs $175 to $485 when the issue is a sensor, remote, keypad, board, or minor mechanical alignment. Gate motor replacement runs higher, typically $620 to $1,450 depending on motor size and whether we’re adding solar capability or a heavier drive for a wide farm gate. A full post re-plumb and gate re-level on clay-heaved soil generally adds $150 to $350 to the service call. Heavy-duty operator installations for wide farm gates start around $1,200 and go up with gate weight and span. Every quote is written, itemized, and agreed before any work starts. Call (828) 426-7081 for an exact quote – estimates are free.
We Also Serve Cities Near Keene
Our Electric Gate Repair crews serve Keene and the surrounding Johnson County communities. You’ll find us on the road to Electric Gate Repair in Keene and the neighboring towns of Cleburne, Joshua, Alvarado, and Burleson. If you’re just outside Keene’s city limits, you’re still inside our service area.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Keene
Usually not. In Keene’s Blackland Prairie clay, the more common cause is that the hinge post has heaved out of plumb after the rain. The operator runs fine, but the gate is no longer level, so it drags and the latch misses. We check post movement first, re-plumb and reset the footing if needed, then re-level the gate and test the operator. The fix is often a post reset, not a motor replacement. Call (828) 426-7081 for an assessment.
If running conduit from the house to the gate would mean trenching hundreds of feet across pasture or driveway, a solar-ready gate opener is usually the smarter, cheaper installation. We size the panel and battery to the motor’s load and Keene’s summer heat, which shortens cheap battery life. A properly built solar system handles the gate reliably year-round. We can evaluate your specific entrance and quote both options.
For wide tube-steel or pipe-rail farm gates, we typically recommend a heavy-duty swing or slide operator from Viking or DoorKing, sized by the actual weight and span of the gate, not the vendor’s basic horsepower rating. An undersized operator fails early and takes its control board with it. We measure the gate, calculate the load, and match the drive and rail accordingly. The written quote includes the full system, not just the motor.
First, check the gear housing and seals each fall for signs of brittleness. Second, replace any rubber seal that has hardened from summer heat. Third, if you expect a hard freeze, disconnect power to the operator and manually operate the gate once or twice to confirm it moves freely before reconnecting. The February 2021 storm cracked a lot of plastic gear housings in Keene because the operators sat frozen solid and beat against bound-up drives. A ten-minute pre-freeze check prevents a $400 repair. Call us before winter and we can walk you through it.
Yes, and that’s the first thing we test. If the safety photocells are misaligned, dirty, or failed, or if the edge sensor is damaged, the operator treats it as a blocked gate and refuses to close. This is a safety system required by code, not a nuisance feature. We align or replace the sensors, verify the operator’s force settings, and restore normal closing. On Keene properties with livestock, we also check that the sensor height matches the gate’s swing path so animals don’t trigger it constantly.
Call Warden Gate Repair For Electric Gate Repair in Keene
When your gate won’t work, you want someone who knows Keene’s soil, its wide farm entrances, its long solar-powered driveways, and its operator brands. You want a name and a photo before the truck arrives, a written price before the work starts, and a repair that’s guaranteed in writing for a full year. That’s how we operate. Call (828) 426-7081 any hour for a free estimate and a straight answer. A live person picks up.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Keene with gate-specific expertise since 2008.