Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across North Richland Hills
Electric gate repair in North Richland Hills typically runs $185 – $420 for most opener, motor, and control board fixes, and our crews reach most North Richland Hills neighborhoods within 60 – 90 minutes for emergency calls. We work on gates throughout the city every week, from the HOA-governed subdivisions around Iron Horse Boulevard down to the older streets near Rufe Snow Drive and Smithfield Road. If your gate won’t open, grinds when it moves, or the keypad stopped talking to the motor, call (828) 426-7081 and we’ll send a named, photo-badged technician with a written price before any work begins.
Why Warden Gate Repair Is North Richland Hills’s Preferred Electric Gate Repair Company
We’ve spent enough time in North Richland Hills to know the gate stock here. The city built out fast through the 1980s and 1990s, and a lot of those original builder-grade tubular steel gates are still swinging. Or trying to. Warden Gate Repair is the gate-and-opener specialist, not a general handyman who happens to own a multimeter. That focus means our techs carry parts for the specific operators common across NRH’s housing stock, and they understand the HOA covenants that govern what can and cannot be installed on a visible gate.
Every technician who comes to your home is background-checked, identity-verified, and photo-badged under the Threshold Standard. We send you the tech’s name and photo before they arrive, so you know exactly who is walking up your driveway. That matters when you’re home alone, when young kids are in the house, or when you simply don’t open the door for strangers. Our Electric Gate Repair team has handled thousands of swing gate operators, slide gate motors, and access control panels across the Mid-Cities. Call (828) 426-7081 and you’ll get a live person, not a voicemail, 24 hours a day.
Gate Access Control in North Richland Hills
Gate Access Control in North Richland Hills is the system that decides who gets in: keypads, remotes, intercoms, phone apps, and sometimes vehicle loop detectors or card readers. For most NRH homeowners, access control means the keypad on the outside post and the remotes in the cars. When that system fails, you either can’t get in, can’t let guests in, or worse, the gate stays open because a safety sensor is faulted. In North Richland Hills, where many homes sit on half-acre or larger lots in the older subdivisions, a functioning access system is also the first line of privacy from the street.
Keypad and Remote Pairing Done Right
We regularly reprogram or replace keypads and remotes on Viking, Ghost Controls, and DoorKing systems across North Richland Hills. The fix is usually straightforward, but pairing wireless hardware to older control boards can get finicky. We test everything at the gate before we leave, not from the truck.
Intercom and Phone-Based Entry
Some NRH homes have moved to phone-based access or a driveway intercom. We handle those integrations too, from wiring a new intercom station at the gate to syncing the app with the operator. Prices for access control repairs in North Richland Hills typically start around $135 for a simple keypad replacement and climb to $400 – $700 when a control board or intercom module is involved.
Commercial Gate Operator in North Richland Hills
A Commercial Gate Operator in North Richland Hills is the heavy-duty motor and gearbox that runs apartment complex gates, HOA community entrances, church parking lots, and business driveways along corridors like Davis Boulevard and Grapevine Highway. These operators run a lot of cycles, often dozens per hour during peak traffic, and they fail differently than residential units. The good news is that Warden Gate Repair is factory-trained on commercial operators from LiftMaster, FAAC, BFT, and other major brands, so the right parts and the right knowledge arrive together.
HOA and Community Entrance Gates
North Richland Hills has a large number of gated communities, and when the entrance gate goes down, every resident notices. We prioritize those calls because a stuck-open community gate is a security problem for the entire neighborhood. We coordinate with your property manager, pull the HOA spec sheet when needed, and get the gate cycling again, often the same day.
Slide Gate Motor and Track Repairs
Commercial slide gates in NRH take a beating from traffic, weather, and the expansive clay soil that shifts concrete pads. We fix the motor, the rack, the rollers, and the safety loops. If the existing motor has burned out, we’ll quote you a written price for a replacement before any work starts, so there are no surprises on the invoice.
Trusted Brands We Service in North Richland Hills
We service equipment from nine major gate and opener brands, and we focus on the units most common in North Richland Hills: Viking, Ghost Controls, DoorKing, and Elite, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Because we work on these brands every day, we stock the parts that fail most often, control boards, limit switches, gear assemblies, and safety photo eyes, so we don’t need to order parts and make you wait a week. For most repairs in North Richland Hills we arrive with what we need on the truck.
Common Electric Gate Repair Problems We See in North Richland Hills Homes
- Black-clay soil heaving and tilting gate posts: Tarrant County’s expansive clay shrinks in summer drought and swells after rain. That movement slowly pushes gate posts out of plumb, which binds the gate and forces the operator to work harder until something gives. Most repeat service calls in North Richland Hills trace back to this one issue.
- Builder-grade operators finally dying: Many NRH homes were built in the 1980s and 1990s with gates installed manual and operators added later, often without upgrading the hinge post or running proper conduit. Those original units are now hitting end-of-life all at once.
- Frozen hinge pins and overloaded motors after ice storms: The Mid-Cities corridor gets hit harder by winter ice than areas south of Fort Worth. Frozen hinge pins snap, and older motors without modern entrapment protection overload trying to move a frozen gate.
- Keypads and remotes losing communication: Summer heat and humidity in North Richland Hills are hard on outdoor electronics. We see corroded contact pads, water-damaged circuit boards, and interference from nearby power lines knocking remotes offline.
Pricing for Electric Gate Repair in North Richland Hills, TX
Here are the numbers we quote most often across North Richland Hills. A keypad replacement runs $135 – $250. Remote repair or replacement is $60 – $120 per remote. A limit switch or safety sensor fix lands between $150 – $300. Control board replacement typically runs $275 – $550 depending on the brand and whether programming is involved. Full operator replacement on a residential swing gate starts around $850 – $1,400, and commercial operators run higher. The written price you get before work starts is the price you pay, every time. Call (828) 426-7081 for a free estimate with no obligation.
We Also Serve Cities Near North Richland Hills
Our crews serve North Richland Hills and the surrounding Mid-Cities area daily. If you’re in Hurst, Haltom City, Bedford, or Colleyville, the same named, photo-badged technicians and written upfront pricing apply. You’ll get the same 365-Day Done Right Promise no matter which side of the city line your gate sits on.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in North Richland Hills
The binding is almost never a lubrication problem in North Richland Hills. It’s the black-clay soil under the gate posts. Expansive clay shrinks in summer drought and heaves after heavy rain, slowly tilting the posts out of plumb. When the posts tilt, the gate leaf sags and the operator has to force it through the misalignment. Lubricating the hinges helps temporarily, but the real fix is resetting or reinforcing the post footing. Call (828) 426-7081 and we’ll diagnose it properly.
Yes, and we work within HOA covenant requirements all the time in North Richland Hills. We keep architectural guideline packets for the major subdivisions, including Iron Horse and Briar Wood, so we confirm picket profile, powder-coat color, and spacing before ordering any visible materials. That prevents violation notices and keeps your gate in spec while we fix the mechanical problem. If a variance is needed, we can tell you before you spend a dollar.
Current safety standards (UL 325) require entrapment protection on automatic gate operators, which means safety photocells or contact edges that reverse the gate if something, or someone, is in the path. Many 1980s and 1990s operators in North Richland Hills were installed before these standards were common. Our techs check for working entrapment protection on every visit and can bring older gates up to current code. Call (828) 426-7081 for an inspection.
First, check whether the hinge post was upgraded when the operator was added. Many manual gates in North Richland Hills were built with lighter posts, and when an operator was bolted on later, the post wasn’t reinforced to handle repeated motor torque. Second, check the conduit run to the operator, many retrofit installations used undersized or direct-buried cable that corrodes over time. Both are common failure points we fix regularly in NRH. We’ll give you a written quote for any corrections before starting.
Yes. Ice storms in the Mid-Cities corridor hit North Richland Hills harder than areas south of Fort Worth, and frozen hinge pins snap under the strain of a motor trying to swing a frozen gate. Older operators without entrapment protection are especially vulnerable because they’ll keep pushing until something breaks. We see a spike in hinge pin, clutch, and motor overload calls after every freeze event. Call (828) 426-7081 if your gate is struggling, and we’ll get someone out quickly.
Written by Cole Rafferty, Owner at Warden Gate Repair. Serving North Richland Hills and the surrounding Mid-Cities with gate-specific repair expertise and the 365-Day Done Right Promise.





Before
After
Before
After
Before
After