Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Tiburon
Electric gate repair in Tiburon usually costs between $185 and $640 depending on whether we’re replacing a hinge pin, diagnosing a circuit board, or rebuilding a rusted post footing. Most jobs on the peninsula are completed with one visit because we stock the common wear parts on the truck. If your gate has stopped mid-travel, won’t respond to the remote, or grinds when it moves, call (828) 426-7081 and you’ll get a written price before anything gets taken apart.
Tiburon’s geography changes the rules. The same gate hardware that lasts 20 years in San Rafael might fail in 7 here, because the bay surrounds this peninsula on three sides and the salt never takes a season off. We account for that in everything we quote and install.
Why Warden Gate Repair Is Tiburon’s Preferred Electric Gate Repair Company
People in Tiburon tend to ask more questions before letting someone onto the property, and we respect that. Every Warden technician is background-checked, identity-verified, and photo-badged under the Threshold Standard. Before your visit, you get the tech’s name and photo sent to your phone, so the person at the gate matches the person you approved. That’s not a courtesy here. It’s the way we work, and it’s one reason Cole Rafferty keeps our Tiburon schedule full through referrals from neighbors along Paradise Drive, Belveron, and the hillside lanes above Tiburon Boulevard.
We don’t do general handyman work. Gates and gate operators are the entire trade, and we’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Every job gets a written price before work starts, a written guarantee, and the 365-Day Done Right Promise: if the repair isn’t right, we come back and make it right at no charge.
A warden is someone trusted to watch over a place and keep it secure. That’s the whole idea behind how we run service calls in Tiburon.
Gate Opener Repair in Tiburon
Gate Opener Repair in Tiburon means servicing the motor box, the control board, and the arm or cylinder that moves the gate leaf. On this peninsula, the opener is often the first component to fail because salt-laden air gets drawn across the circuit board every time the marine layer rolls in. Condensation plus salt equals corroded traces and dead relays, even on a gate that looks fine from the curb. A typical opener repair in Tiburon runs $225 to $580 depending on whether we’re replacing the board, the arm, or the full motor assembly.
Control board diagnosis and replacement
We bench-test the board before quoting a replacement. Many Tiburon failures trace to moisture ingress around the control board enclosure, so we specify sealed gaskets and, where needed, a marine-rated enclosure rather than swapping in the same leak-prone housing. The written price includes the board, the seals, and the labor to verify the safety sensor loop afterward.
Slope-rated and articulating-arm operators
If your driveway climbs 10 percent or more, a standard residential swing operator will fight gravity every cycle. We install slope-rated and articulating-arm units sized for the grade and the weight of the leaf. This is a specification decision, not an upsell. It’s the difference between an opener that lasts and one that strips gears by winter.
Automatic Gate Repair in Tiburon
Automatic Gate Repair in Tiburon covers the full system: the operator, the keypad, the remote receiver, the safety sensors, and the hinge hardware the whole setup depends on. Automatic gates here fail in predictable patterns, and most of them involve corrosion. Expect $260 to $640 for a complete automatic gate repair when it includes multiple components like a receiver plus hinge hardware plus a new safety sensor.
Remote and keypad failure
Remotes and keypads are the easiest part of the system to test, but the cause isn’t always the handset. Salt air corrodes the receiver antenna connection inside the operator box, which makes the whole remote system act dead. We test the receiver first so you don’t buy a new remote for a problem that was actually a green terminal in the box.
Safety sensor loops and reversing edges
Automatic gates in Tiburon face a specific risk: photo-eye lenses that get filmed with salt and marine moisture lose their signal, and a gate that can’t see a child or a car is a hazard. We clean, test, and where needed replace sensors and reversing edges on every automatic gate repair. If we can’t verify the safety loop, we won’t call the gate fixed.
Trusted Brands We Service in Tiburon
We’re authorized to service Viking, Ghost Controls, and DoorKing equipment, and we carry the repair parts for those lines on our Tiburon trucks. That means fewer “we’ll order it and come back” visits and more same-trip repairs. We also work on Elite openers, which show up on a lot of older Tiburon estate gates. If your operator badge says something else, call us and we’ll tell you honestly whether we can service it before we schedule the trip.
Common Electric Gate Repair Problems We See in Tiburon Homes
- Rusted hinge posts on 1950s and 1960s hillside gates. The original painted steel posts rust from the inside out, and the first sign is usually a sagging gate leaf, not visible rust. We’ll tell you honestly whether the post footing needs rebuilding or whether new stainless hinges and sag correction hardware will hold for the long term.
- Corroded circuit boards in operator enclosures. Marine-layer moisture condenses inside the box and leaves salt residue on board traces. Gates that work in the afternoon and die overnight are usually telling you the board has moisture damage. A sealed enclosure with a fresh gasket is part of any board replacement we quote in Tiburon.
- Pitted weld joints on wrought-iron gates. Even powder-coated iron gates get micro-scratches over time, and salt air attacks the exposed steel at the welds. We grind, treat, and re-coat pitted weld joints before they become structural failures.
- Gear stripping on undersized swing operators. Heavy iron gates on steep Tiburon driveways eat standard flat-ground openers. If you hear grinding at the end of travel, stop using the gate and call us. We size the replacement for the actual gate weight and slope, not the builder’s original spec.
Pricing for Electric Gate Repair in Tiburon, CA
A hinge pin replacement or latch adjustment in Tiburon typically runs $185 to $260. A control board replacement with a sealed enclosure runs $340 to $580. A slope-rated swing operator replacement, including arm and travel setup, runs $480 to $640. Full post footing rebuilds are quoted per site because the footing is buried and we won’t guess at what’s under the pavers. Every quote is written, emailed before work begins, and agreed to before we touch anything. Call (828) 426-7081 for an exact price. Estimates are free.
We also serve nearby cities including Tiburon, Los Angeles, San Diego, San Jose, and San Francisco, so if you’re just across the county line, the same Electric Gate Repair team can still reach you.
We Also Serve Cities Near Tiburon
Warden Gate Repair covers Tiburon and surrounding Bay Area communities including Los Angeles, San Diego, San Jose, and San Francisco. Scheduling is coordinated from our San Francisco Bay Area office, and our crews are dispatched locally to Tiburon every weekday and for emergency calls on weekends.
Serving Tiburon, CA - Our Local Coverage Area
We’re based in the Tiburon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Tiburon
Tiburon sits on a narrow peninsula with the bay on three sides, so your gate gets salt-laden wind from the east, south, and west nearly every day. San Rafael is more sheltered and farther from open water. Unprotected steel hardware in Tiburon can pit within a single season, which is why we specify stainless fixings and marine-grade coatings here by default. Call (828) 426-7081 and we’ll walk your property and tell you exactly which components are corroding and which are still solid.
Most sagging Tiburon gates need new hinge hardware and a rebuilt post footing, not a new gate leaf. The original painted-steel posts on many 1950s through 1970s hillside homes rust from the inside out, and the panel itself is usually fine. We assess the post, the hinge mounting points, and the gate’s weight before recommending whether to rebuild the footing or replace the gate. A written price comes first either way.
We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators in Tiburon. We stock repair parts for Viking, Ghost Controls, and DoorKing on our local trucks. For other brands, we confirm parts availability before scheduling so you’re not waiting on a second visit.
You should test the obstruction reversal monthly by blocking the gate’s path with a solid object while it closes. The gate should stop and reverse direction. On a photo-eye system, wave your hand through the beam while the gate is closing. If the gate keeps moving, the safety loop has failed and needs immediate service. We verify safety sensors on every repair we complete in Tiburon. Call (828) 426-7081 and we’ll inspect yours.
Yes. The marine layer here carries more than fog; it carries dissolved salt, and it condenses inside operator enclosures as they cool overnight. Salt film on circuit traces causes corrosion short circuits that make the gate erratic. A board that works at noon and fails at night is a textbook marine-moisture failure. Replacement boards should always go into sealed, gasketed enclosures, which is standard on every Warden quote in Tiburon.
We explain what salt air off San Francisco Bay does to hinges, posts, welds and operator boards in Tiburon, and we specify what actually lasts here: stainless fixings, galvanized post footings, sealed board enclosures, and slope-rated operators. Call (828) 426-7081 for a free estimate, and you’ll get a name, a photo, and a written price before work begins. We’re available 24/7 for genuine emergencies.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Tiburon since 2008.