Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Ennis, TX
Gate work in Ennis runs on a different clock than it does closer to Dallas. The Blackland Prairie gumbo under most of Ellis County heaves and shrinks through the year, which means a gate post that was perfectly plumb in March can be leaning by June. Add the volume of older ranch gates and long driveway entrances on the acreage around town, and you get a repair profile that’s heavier on heavy steel, hinge welds, and footing work than almost anywhere else in the metro. If your gate won’t swing, won’t stay latched, or the opener has quit, call Warden Gate Repair at (828) 426-7081 and we’ll send a tech whose name and photo you’ll have before he pulls in the drive.
Why Ennis Homes Are Different
Ennis sits on some of the most expansive clay soil in North Texas. Spring rain makes the ground swell; August heat cracks it open. A standard 2-foot concrete footing that holds fine in a Dallas suburb will lean within two wet seasons here. That’s why so many local gate callbacks happen every May, right after the spring rain cycle, when posts that looked fine through winter suddenly list toward the gate’s swing arc.
The housing stock tells the other half of the story. In-town Ennis has a large core of mid-century homes on modest lots, many with older chain-link or tubular-steel driveway gates that haven’t been touched in decades. Ringing that core is a broad band of rural acreage and long-time Czech-heritage farm properties, where welded-pipe swing gates and ranch entrances dominate. Those gates are built heavy and used hard, and many were installed long before anyone thought about automated openers. Newer subdivisions on the fringe add some slide and swing automation, but the bread-and-butter call in Ennis is still a gate that has been swinging by hand for thirty years and finally wore something out.
Our Main Ennis Services
Most calls we take in Ennis fall into one of three buckets: a gate that won’t open or close the way it should, an electric system that has stopped responding, or a gate motor (the box that swings or slides your gate automatically) that has failed. Each has its own page with local detail, so start with whichever matches your problem.
Gate Repair in Ennis
A gate repair call in Ennis usually starts with the post, not the gate itself. Blackland clay works posts loose over a single wet season, and once a post moves, the gate’s weight lands on the hinges instead of the column. That bends hinge brackets, drags the latch end through the dirt, and eventually cracks welds. We reset posts with the deeper footings this soil demands, then true the frame so the gate swings free. Full details are on the Gate Repair in Ennis page.
Electric Gate Repair in Ennis
Electric gate trouble in Ennis often traces back to the spring storm cycle. A hard gust catches an unlatched swing gate, slams it hard against the stop, and the impact loosens wiring or knocks a safety sensor out of line. We test the loop detectors, photo eyes, and control board systematically until the gate cycles clean again. Read the full breakdown under Electric Gate Repair in Ennis.
Gate Motor Repair in Ennis
When the motor on a ranch gate quits, the gate becomes a two-person job: one to work the latch, one to wrestle the gate itself. In Ennis we see motors that have been run for years on undersized wire runs from the house, especially on long rural driveways where voltage drop is a real issue. We diagnose the motor and the power feeding it, then repair or replace what’s actually failed. See Gate Motor Repair in Ennis for the full scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Ennis
We carry factory training on the brands that show up on Ellis County properties: Viking and DoorKing on ranch entrances, Elite slide operators on newer driveway systems, and Ghost Controls on lighter residential swing gates. Most common repair parts ride on our trucks, so a single visit usually finishes the job. See our brands for the full service list.
Pricing for Gate Company in Ennis, TX
The range below reflects what Ennis homeowners typically pay. Your written price is locked before any work begins, so the invoice never surprises you.
| Service | Typical range in Ennis |
|---|---|
| Gate post reset (single post, deeper clay footing) | $240 – $480 |
| Hinge replacement (heavy steel weld-on) | $140 – $320 |
| Gate frame straightening and weld repair | $180 – $450 |
| Latch and catch realignment | $90 – $210 |
| Gate wheel or roller replacement | $110 – $260 |
| Electric gate diagnostic visit | $85 – $160 |
| Safety sensor (photo eye) replacement | $130 – $280 |
| Control board replacement | $220 – $520 |
| Gate motor replacement (swing or slide) | $580 – $1,340 |
| Remote or keypad programming (per device) | $60 – $140 |
Prices in Ennis run slightly higher than in closer-in DFW suburbs for one structural reason: the clay. Post work here almost always means deeper footings and more concrete, and that labor and material shows up honestly in the line item. Every quote is a written line-item price, agreed before we touch a tool.
Neighborhoods We Serve in Ennis
We work the whole Ennis area, from the older in-town streets to the acreage on the outskirts. Most calls get a same-day or next-day response, depending on how far out the property sits and how the dispatch board lines up that morning.
- In-town Ennis (mid-century homes, older driveway gates)
- Western Lake Park and shoreline lots
- Lake Bardwell rural tracts
- Acreage east of I-45 toward Bristol
- Newer subdivisions off Highway 34
Service Area – Cities Near Ennis
While this page covers Ennis specifically, our techs also run calls in the surrounding Ellis County corridor. If you’re a few miles up the road, check Waxahachie, TX, Red Oak, TX, Wilmer, TX, or Lancaster, TX for local detail. Dispatch for all of these runs from our Dallas-Fort Worth office, with crews scheduled into Ennis daily.
Serving Ennis, TX - Our Local Coverage Area
We’re based in the Ennis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Ennis
Most Ennis calls get a same-day or next-day visit. A tech’s name and photo are sent to you before anyone shows up, so you always know who is walking up the drive. Call (828) 426-7081 and the dispatcher will give you a window while you’re on the phone.
For a repair on an existing gate, typically no permit is required. For a full replacement with new concrete footings, check with the City of Ennis building department first. We handle the actual work and will flag any permit question before the job starts.
If a repair we performed fails within a year, we come back and make it right at no charge. That includes a free return visit. Soil movement in Ennis can shift things after a wet spring, so this promise matters more here than in most places. Every job also includes a written price before work begins, no exceptions.
Ready to get the gate swinging right? Call (828) 426-7081 for a free estimate. You’ll know who is coming and what it will cost before anyone touches the gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ennis Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.