Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Los Angeles?
In Los Angeles, a call-box entry system with keypad and intercom typically runs $1,450 to $3,200 installed, a standalone keypad or card reader setup costs $450 to $1,100, and the same hardware added to a gate with existing wiring is on the lower end of that range. A single automated swing gate operator with new access control, by contrast, runs $2,600 to $6,500 depending on gate weight, operator brand, and how far the control wiring has to travel.
The number that actually matters is the one written down for your specific property, because in Los Angeles the wiring run, the gate material, and the age of what’s already there change the price more than the hardware itself. Warden Gate Repair gives you a written price before any work starts, so you know the number before anyone picks up a tool. Call (828) 426-7081 and a live person answers, day or night, and we’ll get you an exact quote.
Gate Access Control Cost Breakdown (2026)
Here’s what Los Angeles homeowners are paying for gate access control work right now. Ranges assume a standard residential property with a single driveway; hillside lots, multi-tenant buildings, and commercial entries fall at the top of each range or above it.
| Work being done | Typical LA price range |
|---|---|
| Keypad entry, standalone (no intercom) | $450 – $1,100 |
| Card reader or fob reader, single door or gate | $650 – $1,400 |
| Telephone entry intercom (call box) | $1,200 – $2,800 |
| Full access control panel with two entry points | $1,900 – $4,200 |
| Video intercom with smartphone app control | $1,600 – $4,500 |
| Wiring run (per 100 ft, trenched) | $250 – $700 |
| Access control added to an existing working operator | $450 – $1,600 |
| Access control plus new swing gate operator | $2,600 – $6,500 |
| Access control plus new sliding gate operator | $3,200 – $7,400 |
| Replacing a failed control board (same hardware) | $400 – $1,100 |
What pushes you toward the top of these ranges: a gate more than 100 feet from the house, which means more trenching and more wire; operator brands that require matched OEM controllers rather than generic ones; and hillside properties in the Santa Monica Mountains where trenching through decomposed granite takes real equipment time. What keeps you near the bottom: existing conduit you can reuse, a control board that’s already compatible, and a gate within 40 feet of the power source.
What Affects Gate Access Control Pricing in Los Angeles
- Brand of the operator. We service nine brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – and pairing access control to a DoorKing or FAAC system costs differently than a basic Mighty Mule residential operator. Matched hardware is what keeps the price where the estimate said it would be.
- Distance from power. Every 100 feet of new wiring run adds $250 to $700. In the Hollywood Hills and the canyons above Studio City, the run from the house to the street gate is often 150 feet or more, and there’s no trenching shortcut through a sloped driveway.
- Gate type and weight. A sliding gate over 1,200 pounds needs a heavier operator, which changes the whole cost picture. In older LA neighborhoods like Hancock Park, many properties still have original iron gates that weigh far more than a modern equivalent.
- Number of entry points. A single driveway is one thing. A pedestrian walkway, a service gate, and a driveway means three devices sharing one controller – and shared control usually costs less per point than three separate systems.
- Permits and electrical. The City of Los Angeles requires a permit for new 120V electrical work at the gate, and anything touching low-voltage from the house still needs to be done to code. If your gate power is on an old circuit, an electrician may need to run a dedicated line before we start.
- Whether we’re repairing or installing. Adding access control to a gate operator that already works is the least expensive path, because we’re not replacing the motor. Diagnosing a board that’s already failed is usually straightforward, and we’ll tell you before the visit if access control replacement makes more sense than component repair.
How to Save on Gate Access Control
A few things reliably bring the price down, and none of them involve cutting corners:
- Bundle the access control with an operator repair you already need. If your gate motor is due for service, adding the keypad or call box on the same visit saves the separate trip charge. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, so the right part and the right tech arrive together.
- Reuse existing conduit and wiring where code allows it. Old conduit that’s still intact can carry new control wire, which removes the trenching line item entirely.
- Start with one entry point. A single keypad on the main driveway covers most residential needs. You can add a pedestrian Gate Access Control point later if you decide you want it.
- Get the written price before work starts. This is how you avoid the surprise line items at the end of the job. Free estimates are standard here, and the number you’re given is the number you pay.
Call (828) 426-7081 and we’ll walk you through the options for your specific gate and do a free estimate. A live person answers 24/7, so you can call whenever you’re ready to have the conversation.
FAQs – Gate Access Control Cost
How much does a gate keypad cost installed in Los Angeles?
A standalone keypad entry system installed in Los Angeles runs $450 to $1,100, including the keypad, the controller, and the wiring to the gate. If the keypad has to be tied into an existing call box or intercom, expect closer to the top of that range. Call (828) 426-7081 for an exact quote on your gate – estimates are free.
Is it cheaper to repair or replace gate access control?
Repair is almost always cheaper when the failure is a single component – a keypad that stopped reading, a relay that won’t trigger, or a control board with one dead channel. Component repair typically runs $400 to $1,100 against $1,450 to $3,200 for a full replacement. We’ll tell you which one makes sense for your hardware before any work begins. Call (828) 426-7081 and we’ll give you the honest answer.
Can you install gate access control the same day in Los Angeles?
In many cases, yes. Keypad and reader replacements on gates with existing wiring can often be completed in a single visit, and we carry common parts for the nine brands we service – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Full new installations, especially ones that need a permit or a long wiring run, get scheduled. Call (828) 426-7081 and we’ll tell you what’s realistic for your address.
Do I need a permit to add gate access control in Los Angeles?
If the work requires new 120V electrical service at the gate, yes – the City of Los Angeles requires a permit for that electrical work. Low-voltage control wiring tied to an existing circuit typically doesn’t trigger a permit. If your gate power needs upgrading, an electrician handles the permit, and we coordinate with them so the timing lines up. Call (828) 426-7081 so we can look at your setup.
How much does a full access control system cost for a multi-tenant building in Los Angeles?
A multi-entry DoorKing or FAAC access control system for a small apartment or commercial building in Los Angeles generally runs $4,200 to $12,000, depending on how many entry points, how the wiring routes, and whether the building needs a directory or call-box upgrade. These are bid jobs, not flat estimates, and the written price comes after we walk the property. Call (828) 426-7081 to set up a site visit – estimates are free.
Whatever you end up spending, the two things worth insisting on are a written price before the work starts and a technician you know by name. Warden Gate Repair gives you both – every tech is background-checked, identity-verified, and photo-badged, and we send you their name and photo before they arrive. That’s The Threshold Standard, and it’s enforced on every visit. You’ll also get the 365-Day Done Right Promise: if the repair isn’t right, we come back and make it right, at no charge. Founded in 2008 as part of the Threshold Group family, Warden Gate Repair has specialized in gates and openers from the start, which is why a warden for your gate makes sense.
Pricing reflects the Los Angeles market as of 2026. Warden Gate Repair offers free estimates – call (828) 426-7081.
Written by Cole Rafferty, Owner at Warden Gate Repair. This page was built for Los Angeles homeowners comparing gate access control pricing and wanting a written number before committing.
What Our Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.