Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Los Angeles?
Gate installation in Los Angeles typically runs $1,800 to $4,500 for a standard driveway gate and $3,500 to $12,000+ once you add an automatic opener, keypad, safety sensors, and concrete work. A basic walkway or garden gate is the cheapest job at $900 to $2,200, while a full custom wrought-iron driveway gate with automation lands at the top of the range. We started as part of the Threshold Group family in 2008, and we still hand every Los Angeles customer a written price before a single bolt gets tightened.
Here’s the part most quotes skip: the gate hardware is rarely the biggest line item. In neighborhoods like Sherman Oaks, the porte-cochère rules and footing depth requirements often cost more than the panel itself. Below is a real breakdown of what you’ll pay in the LA market in 2026, plus the factors that move the number by thousands.
Gate Installation Cost Breakdown (2026)
These ranges reflect what we see installing gates across Los Angeles this year, from the Valley to the South Bay. Your exact price depends on gate size, material, and site conditions, but this is the honest map.
| Line item | Typical LA range (2026) |
|---|---|
| Walkway or garden gate (single, manual) | $900 – $2,200 |
| Standard driveway gate (manual, up to 12 ft) | $1,800 – $4,500 |
| Custom wrought iron or steel driveway gate | $3,500 – $9,000 |
| Automatic opener (single swing or slide) | $1,400 – $3,200 |
| Dual-gate automation (two leaves, tandem arms) | $2,800 – $5,500 |
| Concrete footings and post setting | $600 – $2,000 |
| Keypad, intercom, or video entry | $350 – $1,600 |
| Safety sensors and photo-eye edge | $250 – $700 |
| Old gate removal and haul-away | $200 – $600 |
| Electrical run to the gate (if no power nearby) | $800 – $3,000 |
What pushes the bill up: hillside lots in the Hollywood Hills where footing access is tight, custom fabrication that matches an existing gate line, dual-leaf gates that need two operators, and any trenching for power or low-voltage wire. What brings it down: a flat, level driveway, a stock panel that fits, and existing power already stubbed to the gate post. If you’re also sorting out an opener later, our guide to Gate Installation in Los Angeles walks through the options in more detail.
We work with gates and openers from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Factory-trained service on those nine brands means the right parts and the right knowledge arrive together, which keeps your install price from creeping up with mid-job surprises.
What Affects Gate Installation Pricing in Los Angeles
- Gate material and weight. Aluminum and ornamental steel sit at the lower end; solid wood, custom ironwork, and glass-insert designs cost more to fabricate and require heavier operators. A gate that swings 400 pounds needs a different motor than one that swings 80.
- Single vs. dual swing or slide. A slide gate needs a clear track run and a level grade; a dual-swing gate needs two operators and synced arms. Both cost more than a single swing leaf, sometimes by 60% or more.
- Power access. If your gate post is far from an outlet or panel, we run conduit and wire, which adds labor and materials. Older LA properties in Hancock Park and Eagle Rock frequently have no stubbed power at the curb.
- Permits and engineering. The City of Los Angeles requires a permit for most automatic driveway gates, and hillside properties sometimes need a soils or structural review. Plan on $250 to $900 for typical residential permitting, more if a plan check is required.
- Terrain and soil. Clay-heavy soil and sloped driveways mean deeper footings and more concrete. On canyon lots, we often pour oversized footings to handle settling.
- Safety and code add-ons. Automatic gates need photo-eye sensors, an edge sensor, and a keypad or manual release per California code. These aren’t optional, and they’re part of any honest quote.
A Note on Gate Operators and Safety
An automatic gate operator is heavy equipment holding real force behind it. We’ll never talk a customer through wiring a motor or a safety loop themselves, because a gate that closes on a person or a car is a serious hazard, and a wrong low-voltage connection can damage the operator board. What we will do is tell you exactly how the system works before we install it: where the photo-eyes sit, what the manual release does, and how the 365-Day Done Right Promise covers the work. If a repair fails within a year, we come back and fix it free. That’s the whole point of the promise, and it’s in writing.
How to Save on Gate Installation
There’s no magic trick that halves a gate price, but a few moves keep the total sane.
- Get a written price before work starts. That’s non-negotiable with us, and it also protects you from a contractor who “discovers” extra line items at the end. The written quote is your leverage.
- Reuse existing power and footings when they’re sound. If your old gate post is well-seated and the conduit is intact, reusing it can trim $600 to $1,500 off the job.
- Choose stock over custom. A standard-size panel with clean lines costs meaningfully less than a fabricated gate matched to a curve in your driveway.
- Bundle the opener with the install. Buying the gate and automation together avoids a second mobilization fee and lets us size the operator correctly the first time.
- Ask about the free estimate first. Before you commit to anything, call (828) 426-7081 for a no-pressure written estimate. You’ll know exactly who’s coming to your door, by name and photo, before they arrive.
FAQs – Gate Installation Cost
How much does a driveway gate cost in Los Angeles in 2026?
A standard manual driveway gate runs $1,800 to $4,500, and adding automation brings the total to $3,500 to $12,000+ depending on size, material, and power access. Custom ironwork and hillside installs sit at the top of that range. Call (828) 426-7081 for an exact quote; the estimate is free.
Is it cheaper to install a slide gate or a swing gate?
A single swing gate is usually the cheaper option, starting around $1,800 for the gate and $1,400 for the operator. A slide gate typically needs a straighter, longer run and a clear track, which adds roughly $500 to $1,500 in site work. We’ll tell you which one your driveway can actually handle before you commit.
Do I need a permit to install an automatic gate in Los Angeles?
Yes, most automatic driveway gates in the City of Los Angeles require a building permit, typically costing $250 to $900 for a residential install. Hillside or canyon properties may need extra review. We handle the paperwork side with you so the install passes inspection the first time.
How long does gate installation take?
A single manual walkway gate is usually a same-day job (3 to 6 hours). A full driveway gate with automation takes one to two days, and if we’re trenching power or pouring new footings, plan on two to three days. The written schedule comes with the written price.
Can you install a gate on a sloped or hillside driveway?
Yes, but hillside installs cost more, usually adding $800 to $3,000 for deeper footings and access. Canyon lots across Los Angeles settle unevenly, so oversized footings and a properly rated operator matter more than on a flat grade. Give us a call and we’ll size it correctly.
What is the 365-Day Done Right Promise?
Every repair and install we do is guaranteed in writing for 365 days. If something fails, we come back and make it right at no charge; the return visit is included. The written price comes first, the written promise comes with it, and a live person answers the phone 24/7 if you ever need us.
Why Los Angeles Homeowners Call Warden
The name isn’t an accident. A warden is trusted to watch over a place and keep it secure, which is the whole idea behind a gate. Most of our customers are people who think carefully before they open the door, whether that’s a parent home with young kids, someone who’s frequently home alone, or an older homeowner who simply wants to know who’s on the other side. So we built the visit around that: every technician is background-checked, identity-verified, and photo-badged, and you get their name and photo before they show up. We call it the Threshold Standard, and it applies to every single job.
We’re an independently owned and operated location within the Threshold Group family, which means local accountability backed by standards refined since 2008. Whether you’re weighing a fresh install or a home gate upgrade you’ve been putting off, we’ll give you a real number and a real person to go with it.
Get Your Written Gate Installation Price
Call (828) 426-7081 for a free estimate. You’ll get a written price before any work starts, a live person on the line 24/7, and the 365-Day Done Right Promise on the finished job. Estimates are free, and there’s no pressure and no surprise line items at the end. Reach out whenever you’re ready; we’re here.
Pricing reflects the Los Angeles market as of 2026. Warden Gate Repair offers free estimates – call (828) 426-7081.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Los Angeles since 2008.
What Our Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.