Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Los Angeles?
Gate parts and welding in Los Angeles typically run $150 to $650 for most single repairs, with full gate frame welding or rebuilds landing between $800 and $2,400 depending on material, length, and how much of the frame has to be cut out and replaced. A bent hinge re-weld on a driveway gate is a small job; a rusted-through steel frame on a 16-foot slider is not. We give you the written price before any work starts, so the number you hear on the phone is the number on the invoice.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what Los Angeles homeowners actually pay us for the most common jobs. Ranges reflect real parts cost, labor, and the condition of the gate we find when we arrive.
| Job | Typical Price Range |
|---|---|
| Hinge re-weld (one hinge) | $150 – $280 |
| Full hinge set replacement with welding | $320 – $600 |
| Cracked frame weld repair (steel or aluminum) | $220 – $550 |
| Gate sag correction (re-weld + realign) | $280 – $650 |
| Latch, striker, and drop rod replacement | $180 – $420 |
| Roller and track replacement (sliding gate) | $260 – $580 |
| Wheel carrier replacement (cantilever/rolling gate) | $300 – $700 |
| Custom weld-in frame section (per section) | $400 – $900 |
| Full gate frame rebuild or re-hang | $800 – $2,400 |
| Post reset or concrete footing repair | $450 – $1,200 |
| Emergency same-day welding call | Add $100 – $250 |
What pushes a job toward the top of a range? Material is the biggest one. Aluminum welding is fussier than steel because the oxide layer fights the weld, so an aluminum frame crack takes longer than the same crack in mild steel. Powder-coated and painted gates need the finish touched up after welding, which adds time and a can of matching paint. And access matters in Los Angeles – if we can’t get a truck close to the gate, we’re carrying a welder and a bottle down a driveway, and that shows up in the labor line.
We service parts and repair work across nine major gate and opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate hardware came from one of those, we know the tolerances and we stock common parts for them. For a fuller look at what this service covers, see our Gate Parts & Welding in Los Angeles page, and you can always start at our home page to see everything we do.
What Affects Gate Parts & Welding Pricing in Los Angeles
- Gate material. Steel welds fast and cheap. Aluminum takes longer and costs more. Wrought iron is closer to steel on labor but usually has a decorative finish that needs repair.
- Gate size and weight. A 4-foot pedestrian gate is a quick job. A 16-foot sliding driveway gate has more frame, more weight, and more welds holding it together.
- Corrosion and rust. Los Angeles gets marine air off the coast plus inland heat, and that combo eats unprotected steel. Gates near Santa Monica and in the South Bay rust faster than gates in the Valley. A rusted joint often means cutting out more metal than the visible crack suggests.
- Hardware condition. If hinges, rollers, or the wheel carrier are also worn, replacing them during the weld visit saves you a second trip and usually a second call-out fee.
- Post and footing condition. A gate that sagged because the post moved needs the post addressed too. Welding a frame back to a leaning post just buys you a few months.
- Permit and code requirements. In the City of Los Angeles, gates on residential driveways generally fall under standard fence and gate height limits, and gates near a pool must meet the safety barrier rules for self-closing, self-latching hardware. If your repair touches a pool barrier gate, the parts we use have to satisfy those rules, and that can change the part list.
- Access and parking. Hillside properties in the Hollywood Hills and narrow driveways in Koreatown mean more setup time, and setup time is billable time.
Gate Parts & Welding vs. Full Gate Replacement
Repair almost always beats replacement when the posts and frame are sound. Welding a hinge back on runs a few hundred dollars; a new custom steel driveway gate fabricated and hung in Los Angeles commonly runs $2,500 to $6,000 or more once you account for fabrication, powder coating, and installation. The tipping point is structural: if the frame is rusted through in multiple spots, or the posts have moved, you’re paying for a repair that won’t hold, and replacement starts to make sense.
One thing we check before quoting: whether the gate is sagging because of the frame or because the ground moved. If it’s the frame, welding fixes it. If it’s the footing, welding alone won’t. That’s why we look before we price.
What the 365-Day Done Right Promise Means on a Weld Job
Every weld repair we do is covered in writing by the 365-Day Done Right Promise. If a weld we made fails within the year, we come back and make it right, and the return visit is free. That matters more with welding than with most repairs, because a weld failure usually shows up months later as a sag or a crack, not the same day.
It also means we don’t chase the cheapest possible fix. A quick tack weld that gets you through the week isn’t a repair, and we won’t put our guarantee behind it.
How to Save on Gate Parts & Welding
- Fix it before it spreads. A single cracked weld is a $220 to $550 job. The same crack left through a rainy season often takes the frame section with it.
- Bundle the hardware. If hinges, rollers, or the latch are also worn, doing it all on one visit saves the second call-out.
- Keep the finish intact. Touch up bare metal after any weld with matching paint. Rust is the number one reason a Los Angeles gate frame needs a full rebuild instead of a patch.
- Ask for the written price first. We give it before work starts, every time, so there are no surprise line items at the end.
- Get a free estimate. Call (828) 426-7081 and we’ll price the job from photos or a quick visit at no cost.
How We Handle Parts and Welding Work
This is the process on every job, so you know exactly what to expect:
- You call (828) 426-7081. A live person answers, 24 hours a day, every day of the year.
- We identify the gate, the brand, and the symptoms over the phone, and we give you a written price range before anyone is dispatched.
- Before the visit, you get your technician’s name and photo. That’s The Threshold Standard – background-checked, identity-verified, photo-badged, and sent to you by name and photo before arrival.
- At the door, the technician shows a photo ID badge. No exceptions.
- We inspect the gate, confirm the written price, and do the work. No surprise line items.
- If the repair fails within 365 days, we come back and fix it free under the 365-Day Done Right Promise.
Our technicians are factory-trained on all nine of the major gate and opener brands, so the right parts and the right knowledge show up together. We repair gates; that’s the entire business. We don’t do general handyman work, which is why we’re fast at this one thing.
A note on safety: gate frames hold real stored stress, especially on swing gates with heavy hinges and on any gate tied to a spring or counterbalance system. A frame under tension can release suddenly when cut. This is not a job for a home welder or a general handyman, and we won’t walk you through doing it yourself. Call a trained tech instead.
FAQs – Gate Parts & Welding Cost
How much does a gate hinge weld cost in Los Angeles?
A single hinge re-weld in Los Angeles usually costs $150 to $280. If both hinges are worn and need replacing with new hardware, expect $320 to $600. Call (828) 426-7081 for an exact quote; estimates are free.
Can you fix a sagging gate the same day?
Yes, most sag repairs are same-day. A sag fix with re-welding and realignment runs $280 to $650. We’ll confirm the price in writing before we start, and we can often reach you the same day you call.
Is it cheaper to repair or replace a gate in Los Angeles?
Repair is almost always cheaper. A weld and hardware repair runs $220 to $650, while a new custom driveway gate in Los Angeles typically costs $2,500 to $6,000 or more installed. Replacement only wins when the frame or posts are structurally gone.
Why does aluminum welding cost more than steel in Los Angeles?
Aluminum welding typically adds $80 to $200 to a comparable steel job because aluminum conducts heat away fast and forms an oxide layer that has to be removed during the weld. It takes more passes, more setup, and more care. Call (828) 426-7081 and we’ll price your specific gate material before we come out.
Does gate welding near a pool need special parts?
Yes. Pool barrier gates in Los Angeles have to meet safety rules for self-closing, self-latching hardware, and those compliant parts usually add $60 to $180 to a repair. We’ll flag it when we see the gate and price it into the written estimate. Call (828) 426-7081 to get started.
Book Your Gate Parts & Welding Estimate
Whether it’s a cracked hinge, a rusted frame, or a gate that’s been dragging for months, we’ll tell you what it costs before we touch anything. Call (828) 426-7081 for a free estimate – a live person answers any hour, any day. You’ll get a written price, your technician’s name and photo before the visit, and the 365-Day Done Right Promise behind the work. That’s what a warden does: watches the gate so you don’t have to.
Pricing reflects the Los Angeles market as of 2026. Warden Gate Repair offers free estimates – call (828) 426-7081.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Los Angeles since 2008.
What Our Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.