Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Colleyville
Gate repair in Colleyville typically runs $225 – $680 for most operator, hinge, and alignment work, and we can usually have a technician at your door the same day or next morning. The catch in this city is that most of what we’re called out for isn’t a simple hinge replacement. Colleyville’s estate lots, built mostly in the 1990s and 2000s, came with automated ornamental iron gates as standard features. Those systems are now 20 to 30 years old, and the operators and control boards are failing at the same time across entire neighborhoods. Call (828) 426-7081 and you’ll talk to a live person who can tell you what’s likely going wrong before we ever roll a truck.
Why Warden Gate Repair Is Colleyville’s Preferred Gate Repair Company
We built our reputation in Colleyville by being the company that tells you who’s coming before they arrive. Every technician we send is background-checked, identity-verified, and photo-badged. You get their name and photo before the visit. When they pull up your driveway, they show a photo ID badge at the door. We call it the Threshold Standard, and it matters in a city where homeowners take security seriously.
Our Colleyville customers know the drill: a written price before any work starts, every time. No vague estimates. No surprise line items at the end. And every repair carries the 365-Day Done Right Promise. If the fix isn’t right, we come back and make it right, free. That’s in writing.
We service equipment from Viking, Ghost Controls, DoorKing, and Elite regularly in Colleyville, and our techs carry common parts for those brands on the truck. That means fewer “we’ll have to order it” conversations and more same-day fixes. Cole Rafferty, who leads our gate repair operation, insists on factory-trained techs for every job. No general handyman guesswork.
Commercial Gate Repair in Colleyville
Commercial Gate Repair in Colleyville usually means one of two situations: an HOA or estate entry with a shared slide gate, or a property owner whose automatic gate has become a liability because it won’t close reliably. We handle both. The work typically involves diagnosing the operator, the loop detector, the safety photocells, and the physical gate track or hinges in one visit, then giving you a written price to fix what’s actually broken rather than the parts a phone diagnosis would guess at.
Operator and Control Board Failure
Commercial operators get cycled hundreds of times a day. When a control board on an older DoorKing or Elite slide operator gives out, the gate either stops responding or behaves erratically. We carry replacement boards and can usually restore function the same trip. Budget $380 – $680 for most board and limit switch replacements in Colleyville.
Misaligned Commercial Slide Gates
Slide gates on Colleyville commercial properties fight the same black clay soil as residential gates. When the ground shifts, the track and rollers bind, and the motor strains until something fails. Regrouting and resetting a slide gate track typically runs $450 – $900 depending on gate length and frost heave damage.
Iron Gate Repair in Colleyville
Iron Gate Repair in Colleyville usually means ornamental wrought iron swing or slide panels on estate driveways. The ironwork itself is often beautiful and built to last. What fails is everything attached to it: the hinge welds, the post footings, the operator arms, and the limit switches. We re-weld cracked panels, replace worn hinge pins, and re-set posts that have shifted in the expansive soil.
Weld and Rust Repair
Ice storms in Tarrant County crack existing weld points on ornamental iron. Then the wet spring swells the clay, the dry summer shrinks it, and those cracks open further. We grind out rusted joints, re-weld them solid, and repaint the repair so it disappears into the gate. Expect $175 – $425 for most weld repairs, more if the panel needs to be removed and jigged in the shop.
Hinge and Post Reset
A sagging iron gate in Colleyville is almost always a post issue, not a gate issue. The black clay moves posts 1 to 2 inches between seasons. We dig out the old footing, pour a deeper pier, and re-hang the gate so it swings true. Post resets run $600 – $1,400 depending on gate size and how much concrete the original builder skipped.
Trusted Brands We Service in Colleyville
We’re factory-trained on the brands that dominate Colleyville’s older estate entries: Viking, Ghost Controls, DoorKing, Elite, and LiftMaster among others. That matters here because so many of these systems are 20 to 30 years old. A technician who only knows current models will misdiagnose a legacy Viking swing operator or a 1990s Elite slide system. Our trucks carry board-level parts for these older units, which means we can often finish the repair in one visit instead of ordering and waiting a week. If you’re not sure what brand your operator is, we’ll identify it from your description when you call.
Common Gate Repair Problems We See in Colleyville Homes
- Posts migrating in the black clay: Gate posts set without deep concrete piers shift 1 to 2 inches between wet springs and dry summers. This is the single most common cause of swing-arm misalignment and motor burnout we diagnose in Colleyville.
- Burnt limit switches on aging operators: Original Viking and Elite control boards from the 1990s and early 2000s fail after years of fighting post shift. The limit switch burns out, then the motor overheats.
- Cracked ornamental iron welds: Ice storms crack old weld points on iron panels. The expanding and contracting soil then pulls those cracks wider until the panel starts to separate visibly from the frame.
- Pre-UL 325 operators without safety photocells: Many legacy Colleyville gate systems were installed before modern entrapment protection standards. They operate without functioning safety edges or photo eyes, which is both a safety gap and, on some properties, a code compliance issue.
Key Takeaways
- Most Colleyville gate failures come from the ground moving, not the gate hardware.
- 20- to 30-year-old operators can often be repaired, not just replaced.
- You’ll get a written price before any work starts, every time.
- Your technician’s name and photo arrive before they do.
Pricing for Gate Repair in Colleyville, TX
Here’s what Colleyville homeowners can expect. A service call and diagnosis runs $85 – $140, which is credited toward the repair if you approve the work. A typical Gate Repair for a misaligned swing gate runs $225 – $480. Operator replacements, including the motor and control board, run $650 – $1,400 depending on brand and whether we’re retrofitting an old system or installing current equipment. Post resets run $600 – $1,400. Weld repairs run $175 – $425. Full iron gate realignment with new hinges runs $300 – $700. The written price is given and agreed before any work starts. Free estimates are available by phone. Call (828) 426-7081.
We Also Serve Cities Near Colleyville
Our crews cover Gate Repair in Colleyville and the surrounding Tarrant County communities. We regularly dispatch to Bedford, Euless, Southlake, and Hurst with the same name-and-photo technician policy and the same written-upfront pricing. If you’re just outside Colleyville, call and we’ll tell you straight whether we can get to you today.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Colleyville
Usually not. A sagging gate in Colleyville is almost always a post footing or hinge issue, not a failed gate panel. We re-set the post in a deeper concrete pier, replace worn hinge pins, and the gate swings level again. Replacement only makes sense when the ironwork itself is rusted through or the panel has cracked beyond safe welding. Call (828) 426-7081 for a free estimate.
Yes. Most legacy operators from Viking, Elite, and LiftMaster can accept aftermarket or OEM photo eyes and safety edges, even if the original install predates UL 325 requirements. We’ll wire the sensors into the control board, set the entrapment thresholds, and test the reverse function before we leave. Budget $225 – $450 per gate for a full safety retrofit in Colleyville.
Because the ground beneath the gate post is moving. Colleyville’s expansive black clay swells after spring rain and shrinks in summer heat, shifting the post 1 to 2 inches. Your operator then fights misaligned geometry every cycle until the limit switch or motor burns out. We fix the post first, then the operator, or you’ll be replacing that motor again in 18 months.
Yes, in most cases. We keep board-level components for older LiftMaster and Viking units, and we have suppliers who stock legacy control boards, limit switches, and gear kits. When a part is truly obsolete, we’ll tell you honestly and quote a retrofit with current equipment that fits your existing gate. Call (828) 426-7081 and we’ll identify what you have before we schedule.
Yes. We work on both slide gate and swing gate operators across Colleyville, including estate double-swing entries and long driveway slide gates. The diagnosis is different for each, but the approach is the same: find what’s actually broken, price it in writing, fix it right the first time.
Call Warden Gate Repair in Colleyville
If your gate is sagging, grinding, or refusing to close, we can take the guesswork out of it today. Call (828) 426-7081 for a free estimate, and you’ll get a live person, a real diagnosis, and a written price before any work starts. Your technician’s name and photo will be sent before we arrive. That’s how we work in Colleyville.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Colleyville and surrounding Tarrant County communities.