Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Henderson
Gate repair in Henderson costs $185 – $650 for most jobs, with sliding gate rail replacements and wrought iron post work at the higher end. You’ll get a written price before any work starts, so there’s no guessing when the bill comes. Our techs know Henderson’s specific gate problems: heat-fried circuit boards, sagging hinge posts in Green Valley, and HOA specs that demand exact color matches in Anthem. Call (828) 426-7081 and we’ll have someone out to your street this week.
Why Warden Gate Repair Is Henderson’s Preferred Gate Repair Company
Henderson homeowners call us because we show up with a name, a face, and a written quote. Not a clipboard and a vague estimate. Every technician is background-checked, identity-verified, and photo-badged under what we call the Threshold Standard. You get a text with the tech’s name and photo before they roll up. When they knock, the badge matches the photo.
Cole Rafferty, who leads our repair crews, has spent years pulling apart Henderson’s particular gate failures: 20-year-old operators from the late-’90s Green Valley buildout, sagging posts from hard-water mineral creep, control boards that baked in the Mojave sun. That local experience means faster diagnosis. Fewer return trips. And because we stock common parts for LiftMaster, FAAC, and DoorKing gates popular in Henderson, we often complete repairs in one visit.
Our Gate Repair team answers the phone 24/7. A live person, always. Every job carries the 365-Day Done Right Promise: if the repair isn’t right, the return visit is free. That’s in writing, every time.
Sliding Gate Repair in Henderson
Sliding gate repair in Henderson typically runs $220 – $480. Most jobs are rack-and-pinion gates, which are the workhorse choice for Henderson’s lots because they don’t swing into the driveway or require a wide arc clearance. The common failure here isn’t the motor. It’s the board. Henderson’s sustained 110°F+ summers cook the control board while the motor and rack are still mechanically fine. You’ll see the gate stop mid-travel, hum without moving, or refuse to reverse off a vehicle. That’s usually a baked board or a failed safety sensor, not a dead motor.
We see this on Horizon Ridge Parkway properties and throughout Green Valley Ranch, where unshaded operators sit in direct afternoon sun. The fix is a new board, a shaded enclosure, and a clean test of the UL 325 entrapment protection. We quote that as one line item before we touch a screwdriver.
You Pay: The written price covers the board, the shade enclosure if the existing one is grilled, and a loop detector test. No surprise line at the end.
Rail and Roller Replacement
A Henderson sliding gate that grinds or jerks mid-travel usually has worn rollers or a rail caked with caliche dust and hard-water mineral film. We clean or replace the rail, set the rollers back to spec, and test the travel under full load. That job runs $260 – $390 on average.
Limit Switch and Photocell Work
When a sliding gate stops short or opens too far, the limit switches are out of adjustment or the photocells are misaligned. Henderson’s dust storms knock sensors out of alignment regularly. We reset, realign, and replace as needed. Expect $120 – $210.
Wrought Iron Gate Repair in Henderson
Wrought iron gate repair in Henderson usually costs $195 – $480 depending on whether we’re fixing a sagging leaf, rebuilding a hinge post, or welding a picket. Henderson’s ornamental iron gates are everywhere: Anthem, Seven Hills, MacDonald Ranch. They’re powder-coated tubular steel, and after 20 years in Mojave heat with Colorado River hard water mineralizing the exposed metal, the hinges and post footings give out. Often the panel itself is fine. The post has pulled loose or rusted at the base.
Patching the leaf alone fails again within a season. We rebuild the footing, set the post in concrete, and re-hang the gate so it swings true. Then we match the coating. HOA communities in Henderson enforce specific black shades and picket profiles, so we keep Anthem and Green Valley design standards on file before any fabrication quote.
Weld and Rust Repair
Rust at Henderson gates isn’t wet-rust from rain. It’s mineral pitting from hard water deposits that sit in crevices and eat through the powder coat. We grind back the corrosion, repair the weld, and re-coat to match. Typical range: $150 – $350.
Hinge and Post Reset
A dragging wrought iron gate in Henderson is almost always a post problem. We dig out the old footing, pour a new one, and reset the hinge post so the leaf hangs even. This is heavy work and runs $300 – $550 depending on the post size and access.
Trusted Brands We Service in Henderson
We service and repair the brands Henderson homes actually use. LiftMaster operators dominate the master-planned neighborhoods. Linear and DoorKing show up on older Green Valley tracts and commercial entries. Viking and Ghost Controls are common on newer acreage and rural properties south toward Boulder City. Because we stock boards, remotes, and safety edges locally, we can often complete a Henderson repair the same week instead of waiting on a backorder from a distributor. Factory-trained across all of them, so the part and the knowledge arrive together. When you call, tell us the brand on the control box and we’ll bring the right parts the first time.
Common Gate Repair Problems We See in Henderson Homes
- Heat-fried control boards: Operators mounted without shade enclosures bake in Henderson’s summers, and the board dies within 3 – 5 years while the motor still runs fine. You’ll see a gate that hums, stops mid-travel, or flashes a fault code but won’t move. The fix is a board replacement with a shade enclosure, not a whole new operator.
- Failed hinge-post footings: Henderson’s hard water leaves mineral deposits that accelerate rust at the post base, and once the post leans or shifts, the gate sags. Patching the leaf won’t hold. We rebuild the footing and re-hang the gate from a solid post.
- UL 325 entrapment failures: Aging loop detectors and safety photocells on wide driveway gates fail silently. The gate doesn’t reverse when it should, which is a safety problem you won’t notice until a vehicle or person is in the path. We test and replace these on every automatic gate repair.
- HOA-mandated aesthetic mismatches: In Anthem, Green Valley, and Seven Hills, a replaced picket or gate section that doesn’t match the community’s approved profile or paint code triggers a violation. We keep Henderson’s HOA design standards on file and order fabricated parts to match before any work starts.
Pricing for Gate Repair in Henderson, NV
Here’s what Henderson homeowners can expect, written plainly:
- Sliding gate control board replacement: $220 – $410
- Wrought iron hinge repair or weld: $150 – $350
- Hinge post footing rebuild: $300 – $550
- Operator replacement on an existing gate: $480 – $780 including the unit, wiring, and programming
- Safety sensor or loop detector replacement: $120 – $240
Every quote is written and agreed before any work starts. No surprise line items at the end. The price covers parts, labor, and the 365-Day Done Right Promise. Call (828) 426-7081 for a free estimate on your specific gate. We’ll talk through what you’re seeing, and give you a real number to plan around.
We Also Serve Cities Near Henderson
Our Gate Repair in Henderson coverage extends to the surrounding valley. If you’re in Boulder City, Las Vegas, North Las Vegas, or Laughlin, the same written-price promise and Threshold Standard apply. Dispatch and scheduling are coordinated out of the brand’s Las Vegas office; crews serve Henderson locally every day.
Serving Henderson, NV - Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Henderson
It’s almost always the post. Henderson’s hard water deposits mineralize exposed steel at the hinge post base, and once the post pulls loose or rusts through, the gate sags even if the panel itself is straight. We confirm on site, rebuild the footing if needed, and re-hang the leaf so it clears the driveway apron again. Call (828) 426-7081 and we’ll tell you exactly what we’re seeing before any work is approved.
Henderson’s high UV and 110°F+ summer heat kill control boards years before the motor gives out. A board mounted without a shade enclosure typically fails within 3 – 5 years here, while the same board in a coastal climate might last a decade. We replace the board and add or repair the shade enclosure so the replacement doesn’t cook the same way. That’s standard on every automatic gate repair we do in Henderson.
Yes. For acreage properties off Horizon Ridge Parkway and points south where running conduit isn’t practical, a solar gate opener with a battery bank and a shaded charge controller works well in Henderson’s sunlight hours. We size the panel to the operator, not just the gate weight, and mount the enclosure out of direct afternoon sun. Solar retrofit runs $600 – $1,100 depending on operator type and battery storage. Call (828) 426-7081 for a free site assessment.
Yes, all automatic gates in Henderson must comply with UL 325 entrapment standards, which means working safety edges, photocells, or a monitored reversing mechanism. Older operators from the late-’90s buildout often lack the modern sensitivity settings or have failed edge sensors. If your gate doesn’t reverse when it hits resistance, that’s a violation and a real injury risk. We test entrapment protection on every automatic gate repair and bring anything non-compliant up to current code before we leave.
In many Henderson communities, yes. Anthem, Green Valley, Seven Hills, and MacDonald Ranch HOAs enforce specific gate profiles, paint codes, and sometimes operator types for gates visible from the street. We keep the current design standards for Henderson’s major HOAs on file and order replacement parts to match before fabrication, so you don’t get a violation letter after the fact. Call (828) 426-7081 and we’ll check your community’s requirements before quoting.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Henderson and the Las Vegas Valley since 2008.
For a free gate repair estimate in Henderson, call (828) 426-7081. A live person answers, 24/7. You’ll get a written price before any work starts, a photo of your tech before they arrive, and a 365-day guarantee on every repair.