Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Moraga
A gate repair in Moraga typically costs between $180 and $1,800 depending on whether you’re dealing with a worn hinge, a corroded control board, or a full operator retrofit that must meet Moraga-Orinda Fire District code. Most service calls to Moraga homes are scheduled within 24 to 48 hours, and the price is written down before any work starts. You’ll know exactly who’s coming to your door, because we send the technician’s name and photo ahead of the visit. Call (828) 426-7081 for a free estimate on any gate issue.
We work throughout the Moraga Valley, up Rheem Boulevard, around the Moraga Country Club corridor, and into the hillside streets behind Campolindo High School. Those long driveways and older gate systems we see here have a particular set of failure patterns, and knowing them means we carry the right parts on the first trip more often than not. Our Gate Repair team is factory-trained on the brands most common across Moraga, and every visit includes a written guarantee.
Why Warden Gate Repair Is Moraga’s Preferred Gate Repair Company
Moraga homeowners call us because we do one thing: gates. Not garage doors, not general contracting. Gate motors, gate hinges, gate control boards, and gate posts. That narrow focus means the technician at your door has seen your exact failure before, often on a house within a mile of yours.
Our reputation in Moraga is built on the 365-Day Done Right Promise. If the repair isn’t right, we come back and make it right, free of charge. That promise is in writing on every invoice. Cole Rafferty, who leads Warden Gate Repair, started with the Threshold Group in 2008, and the same standard applies on every Moraga job: background-checked, identity-verified technician, photo badge shown at the door, and a written price before any work begins.
We also answer the phone. Not a call-back service, not a chatbot. A live person answers 24 hours a day, seven days a week. If your gate fails at 11 p.m. and your car is stuck inside, you’ll talk to a real human who can dispatch a tech to Moraga.
Wrought Iron Gate Repair in Moraga
Wrought iron gate repair in Moraga is one of our most common calls, especially on the larger estate-style properties along the Moraga Country Club corridor and in the hills around Sanders Ranch and Rancho Laguna. Wrought iron gates on masonry pillars were often built decades ago, and the failure point is rarely the iron itself. It’s the hinge post, the lower pivot bearing, or the weld at the base of the pickets where years of moisture from valley fog has done its work.
A typical wrought iron gate repair in Moraga runs $350 to $1,400. Replacing a broken hinge or re-welding a cracked picket sits at the lower end. Re-setting a sagging post or fabricating a replacement section pushes toward the higher end. We’ll give you the written number before we start, so there are no surprise line items at the end.
Sagging Gates on Masonry Pillars
Moraga homeowners often ask us if we can fix a sagging wrought iron gate without rebuilding the masonry pillars. Usually, yes. The pillar is almost never the problem at first. The hinge mounts drilled into the pillar have wallowed out over thousands of open-and-close cycles, or the lower bearing has seized. We repair the mounting points and replace the bearing, saving you the expense of pillar demolition and reconstruction.
Rust Repair and Repainting
Wrought iron gates in Moraga deal with morning fog saturation for much of the year. That moisture settles into every small scratch, which is why we see rust more often on west-facing gates and shaded lots. We cut out the rot, weld in fresh material, and prime and paint to match to manufacturer spec. Figure $250 to $900 depending on how far the rust has traveled.
Metal Gate Repair in Moraga
Metal gate repair in Moraga covers everything from lightweight aluminum driveway gates on 1970s ranch homes to the heavy steel slide gates common in the Rheem district. The older metal gates hung before modern safety requirements often fail at the post rather than the panel, and that’s where our work focuses. A bent-track repair or wheel replacement runs $180 to $450. A full panel straightening or hinge rebuild runs $500 to $1,200.
Many of the metal gates we service in Moraga were installed before UL 325 entrapment protection became standard. When we’re on-site for a simple repair, we’ll check whether the gate still has functional safety eyes and reverse-on-contact. If it doesn’t, we’ll quote the retrofit clearly and let you decide. The Moraga-Orinda Fire District expects compliant hardware on any automated gate, and we’d rather tell you now than have a fire inspector tell you later.
Slide Gate Track Repair
Slide gates across Moraga take a beating from oak and eucalyptus debris. Leaves, acorns, and bark strips pack into the track, then the wheels grind through all of it. You’ll hear a grinding noise or see the gate hesitate mid-travel. We clear the track, replace worn wheels and rollers, and adjust the rack and pinion so the gate travels straight and quiet again.
Aluminum Gate Repair
Lighter aluminum gates are common on newer Moraga homes near the Moraga Commons and along Camino Pablo. These gates rarely rust, but the welds at the corners crack from repeated flexing. We TIG-weld the aluminum frame, re-align the hinges, and get the gate closing square. Most aluminum gate repairs in Moraga run $220 to $600.
Trusted Brands We Service in Moraga
We’re factory-authorized on Viking, Ghost Controls, and DoorKing operators, along with the other major gate opener brands installed across Moraga. Viking and DoorKing gear is especially common on the larger estate gates around the Country Club corridor. Ghost Controls is a frequent find on mid-size residential swing gates in the Moraga Valley. Because we stock motors, control boards, safety beams, and remote transmitters locally, we can usually complete a same-week repair in Moraga without waiting on a distributor shipment.
Common Gate Repair Problems We See in Moraga Homes
- Corroded control boards from valley condensation. The enclosed Moraga Valley runs 15 to 20 degrees hotter than the Bay shoreline on summer afternoons, then cools into fog-saturated mornings. That daily thermal swing pulls moisture inside operator housings. Circuit boards on older LiftMaster and FAAC operators corrode long before the motor wears out, and you’ll see erratic behavior or complete non-response.
- Binding slide gates from oak and eucalyptus debris. Moraga’s hillsides shed leaves, acorns, and bark strips into slide-gate tracks all year, but especially in fall and after wind events. The debris packs tight, the gate grinds or stalls, and the loop detector trips falsely. We see this constantly in the Rheem and Moraga Valley neighborhoods with mature tree cover.
- Sagging hinge posts on legacy swing gates. Gates hung in the 1990s and early 2000s were often built on undersized posts or shallow footings. Over decades of use, the post leans or the gate droops at the latch. Re-setting the post footing and re-aligning the hinge is the fix, and it’s a job most general contractors won’t touch properly.
- Missing Knox switches on automated gates. Almost all of Moraga sits inside California’s Very High Fire Hazard Severity Zone. The Moraga-Orinda Fire District requires Knox key switches, fail-open battery backup, and break-away hardware on automated driveway gates. Many gates in Moraga were installed before these rules were enforced. Homeowners often discover the gap during a routine repair.
Pricing for Gate Repair in Moraga, CA
Here are the numbers we quote every week in Moraga. A basic hinge or wheel replacement runs $180 to $350. Realigning a swinging gate and rebuilding the hinge mounts runs $300 to $700. Control board replacement runs $350 to $900 depending on the brand, and a full operator retrofit that brings the gate into Moraga-Orinda Fire District compliance runs $900 to $1,800 all-in. The exact figure depends on what’s worn, but the written price is always agreed before work starts. No surprises. Call (828) 426-7081 for a free estimate.
Replacement versus retrofit is a real decision on older Moraga gates. If the operator is obsolete and the gate post is sagging simultaneously, sometimes replacing the whole assembly costs less than fixing it piece by piece. We’ll price both options and tell you which makes more sense.
We Also Serve Cities Near Moraga
Our crews serve Moraga and the surrounding Lamorinda and central Contra Costa communities, including Orinda, Walnut Creek, Lafayette, and Alamo. If you live just outside Moraga and need gate work, call (828) 426-7081. Scheduling and dispatch are coordinated from our San Francisco Bay Area office.
Serving Moraga, CA - Our Local Coverage Area
We’re based in the Moraga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Moraga
Yes, if your gate is automated and your property sits within the Very High Fire Hazard Severity Zone, which covers almost all of Moraga. The Moraga-Orinda Fire District requires a Knox key switch so firefighters can open the gate from outside during an emergency. Many older gates in Moraga lack this part. We can add one during any service call, and the cost is typically $150 to $300 including installation. Call (828) 426-7081 to schedule a check.
It’s the valley condensation cycle. Moraga’s inland microclimate swings hot in the afternoon and foggy-cool overnight, which pulls moisture into the operator housing and corrodes the circuit board. Older LiftMaster and FAAC boards are especially vulnerable. We stock replacements and can often swap the board the same week. Call (828) 426-7081 for a diagnostic visit.
In most Moraga cases, yes. The sag is usually the hinge mounts or the lower bearing, not the masonry. We re-set the mounting hardware, replace the bearing, and the gate swings level again. Rebuilding pillars is a last resort. A typical repair runs $350 to $900. Call (828) 426-7081 and we’ll tell you what you’re looking at after seeing photos.
Oak and eucalyptus debris. Moraga’s tree canopy drops leaves, acorns, and bark strips into the track all spring, and they pack into the wheel path. The gate grinds, stalls, or trips its safety sensors. We’ll clear the track, replace worn rollers, and adjust the rack so the gate travels cleanly. Expect $180 to $450 for a typical Moraga track cleaning and wheel replacement. Call (828) 426-7081 for service.
It depends on two things: the condition of the operator board and the condition of the gate post. If the board is obsolete and the post has shifted, replacement is often cheaper than repairing both separately. If the gate itself is sound and only the operator is failing, a retrofit runs $900 to $1,800 in Moraga. We’ll price both options and give you the written numbers before you decide. Call (828) 426-7081 for a free on-site assessment.
We were called to a split-level home off Rheem Boulevard where a 1990s LiftMaster swing gate had stopped responding. The control board was corroded from years of valley condensation, and the hinges had begun to sag at the hinge post. After replacing the board, correcting the sag with new post footings, and adding the Knox switch and fail-open battery backup required by the Moraga-Orinda Fire District, the gate cycled smoothly and passed the compliance check the same week. That’s the kind of Moraga gate repair we do every month.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Moraga since 2008.