Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Schertz
Most gate repairs in Schertz run between $185 and $480, and the work can usually be completed the same day we diagnose it. If your gate is stuck open, sagging on its hinges, or the operator is grinding without moving the gate, call (828) 426-7081 and we’ll send a technician with a name, a photo, and a written price before any work starts. We know the subdivisions off FM 3009, the IH-35 corridors, and the back streets around Savannah and Randolph AFB. Local means we’re not mapping your address from across the state: we already know the gate styles, the soils, and the operators in your neighborhood.
Why Warden Gate Repair Is Schertz’s Preferred Gate Repair Company
Schertz homeowners call us because we do one thing: gates. Not gates and garages and gutters. We repair swing gates, slide gates, gate motors, hinges, posts, locks, and the welded frames holding it all together. The gate at your driveway is what we work on all day, every day.
Every technician who arrives at a Schertz home has passed the Threshold Standard: background-checked, identity-verified, and photo-badged. You get the tech’s name and photo sent to your phone before the truck rolls. At the door, the badge matches the photo. That matters in a city where a lot of people are home alone, or have young kids, or just don’t want to open the gate to a stranger without knowing who’s standing there.
And here’s the part that actually pays off: we don’t quote vague ranges and then invoice higher. The written price is the price. It goes in your hand before we turn a wrench. If the repair fails within 365 days, we come back and make it right at no charge. That’s the 365-Day Done Right Promise, in writing, on every single job.
Founded in 2008 as part of the Threshold Group family, Warden Gate Repair has spent its entire history on gate-specific work. Cole Rafferty, who leads our team, insists on sending technicians who stock the exact boards and parts Schertz neighborhoods actually need, not a generic van full of maybe-parts. You can reach a live person at (828) 426-7081 at 3:00 p.m. or 3:00 a.m. No voicemail tree, no chatbot.
Gate Welding in Schertz
Gate Welding in Schertz usually means repairing a broken ornamental iron or tubular steel gate that’s sagged, cracked at a weld joint, or pulled loose from its hinge post. These are the builder-upgrade driveway gates that went in across Savannah, Carolina Crossing, and the FM 3009 corridor subdivisions, and they’re now at the age where the original welds and powder coat are failing together. A crack repair typically runs $125 to $225 per joint; a full gate re-weld and reinforcement with rust treatment runs $350 to $600 depending on gate size and access.
Hinge Post Repairs
When the black clay under a Schertz gate post expands after rain, the post leans and the weld at the hinge tears. We cut out the broken weld, re-plumb the post with proper compaction, and re-weld with gussets so the same crack doesn’t come back next wet season.
Rust and Corrosion Work
Schertz summer heat plus irrigation overspray equals rust on unpainted or chipped gate frames. We grind, treat, and re-coat the affected sections as part of the weld repair so you’re not back in six months with a new rust hole forming two inches away.
Commercial Gate Repair in Schertz
Commercial Gate Repair in Schertz covers slide gates, cantilever gates, and heavy swing gates at apartment complexes, churches, and the business parks along IH-35 and FM 3009. These gates run hundreds of cycles a day, so the failure modes are different: worn V-track wheels and rollers on slide gates, failed loop detectors, and operators that burn out from constant cycling. Commercial gate calls in Schertz typically start around $325 for roller and track service and run $650 to $1,400 for operator replacement on a heavy slide gate, written as a firm quote before work begins.
Slide Gate Track and Roller Work
When a commercial slide gate starts shrieking or binds halfway through its travel, the culprits are almost always the wheels, the track, or the chain tension. We replace rollers, re-align track, and re-tension drive chains in one visit, then adjust the limit switches so the gate stops clean instead of slamming.
Operator and Safety System Replacement
We’re factory-trained on Viking, DoorKing, Elite, and Ghost Controls commercial operators, among others. A failed commercial operator on an apartment complex gate off Roy Richard Drive needs a tech who can pull the old unit, set the new one, and re-verify the UL 325 entrapment protection with a force test before the gate goes back into service. We stock the common commercial boards and V-belts so downtime is measured in hours, not days.
Trusted Brands We Service in Schertz
We service the gate operators Schertz builders actually installed: LiftMaster and Linear on the residential side, Viking and DoorKing on commercial slide gates, and Ghost Controls and Elite for aftermarket and specialty automation. Because we’re factory-trained on these specific brands, we know which board generations fail and which parts are worth replacing versus scrapping the unit. We keep the failure-prone replacement boards and sensors on the truck, which is how we finish same-day jobs in Schertz that other shops quote a week out on while they wait for parts to ship.
Common Gate Repair Problems We See in Schertz Homes
- Dead builder-grade operators in clusters. In the FM 3009 subdivisions built between 2008 and 2013, the original LiftMaster and Linear control boards are dying in waves. We’ll run three calls on the same street in one week because the boards were all from the same production run and they all cook in the same summer heat.
- Posts heaving out of plumb. Schertz sits on expansive black clay that swells when wet and shrinks when dry. A gate that worked perfectly in May can drag by September because the post shifted a half inch. We re-set and brace the post, then re-align the gate to the operator’s travel path.
- Aftermarket automation done without conduit. A lot of Schertz homes were built with manual gates, and a previous owner bolted on an operator with exposed low-voltage wire running across the lawn. It works until the edger hits it. We run proper conduit, bury the cable, and re-install the operator with the right transformer and UL 325-compliant safety edges.
- Hinge welds cracking under thermal stress. The 100°F-plus days along IH-35 don’t just bake the operator boards; they cause the metal gate frame to expand and contract against the hinge welds until something cracks. We see this on ornamental iron gates in Savannah and Carolina Crossing routinely.
Pricing for Gate Repair in Schertz, TX
Here’s what to expect in Schertz, based on the calls we run every week. A basic service call and diagnostic: $85. Hinge re-weld and post plumb: $180 to $350. Control board replacement on a LiftMaster or Linear residential operator: $220 to $420. Operator replacement (unit and labor): $450 to $900. Full gate realignment with post work: $250 to $500. Commercial slide gate roller and track service: $325 to $700. Every quote is written, itemized, and agreed to before we start. No estimate-then-invoice escalation. Call (828) 426-7081 and you’ll get a straight answer on cost before we schedule the truck
We Also Serve Cities Near Schertz
Our Gate Repair service extends from Schertz into Universal City, Cibolo, Converse, and New Braunfels. If you’re just outside the Schertz city limits on FM 78 or up toward the county line, we still cover you. For the full picture of where we work, see Gate Repair in Schertz or call us and we’ll confirm your neighborhood.
Serving Schertz, TX - Our Local Coverage Area
We’re based in the Schertz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Schertz
Yes, and we do this constantly. We match the repair to the existing gate’s material, finish, and design, and we coordinate with your HOA’s architectural review process when the work is visible from the street. In Schertz subdivisions like Savannah, the HOA typically cares that the gate looks the same after the repair as it did before. We document the work in a way that satisfies the review committee, and if they need a spec on the weld or the finish, we provide it.
Because the homes were built around the same time, by the same builders, with the same gate operator models. In the FM 3009 corridor subdivisions platted between 2008 and 2013, LiftMaster and Linear installed thousands of swing gate operators during the initial build. Those boards have a similar service life, and the Schertz summer heat accelerates the degradation uniformly across the neighborhood. So when one board fails, the same-generation boards on the same street are usually weeks behind it. We keep those exact boards on the truck.
If the gate sags toward the latch side and the hinge pins look tight, it’s almost always a structural problem: a cracked weld at the hinge, a post that’s leaned, or a frame that was undersized for the gate’s weight. The operator isn’t causing the sag; it’s just fighting it, and that extra load is what burns out the board and strips the gears. We fix the structure first, then re-balance the gate so the operator works with the same effort it did new.
Yes. A proper automatic gate needs a dedicated low-voltage power run through buried conduit, not an extension cord or exposed wire stapled across the fence line. The gate operator needs a transformer at the house, a cable in conduit to the operator at the gate, and safety edges or photo eyes wired to the control board. We run conduit and pull the proper gauge wire as part of the automation install. If your gate was built manual, we handle the full power run so it meets code and UL 325 requirements for entrapment protection.
Check that the gate reverses when it meets resistance, like a body or a pet, and that the safety edges or photo eyes are wired and working. If the gate keeps pushing against a trash can or a child, that’s a failed entrapment protection circuit and it needs immediate attention. We test every gate’s reversal sensitivity and non-contact sensors after any repair or install. High-tension springs and gate operators can cause serious injury if misused, so this is work for a trained technician, not a DIY weekend job. Call (828) 426-7081 if your gate doesn’t reverse properly.
Call (828) 426-7081 now for a free estimate on your Schertz gate repair. We’ll answer in person, give you a written price, and send a technician whose name and photo you’ll have before they ring the bell.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Schertz and surrounding communities with gate-specific repair since 2008.