Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across White Settlement
Gate repair in White Settlement usually means one of two things: an automatic opener that quit after a storm, or a swing gate that drags because its post has shifted in the clay. Both are fixable, and most jobs run between $180 and $2,800 depending on whether we’re resetting a post or replacing an operator. Warden Gate Repair sends a background-checked, name-and-photo-confirmed technician to your door, with a written price agreed before any work starts. Call (828) 426-7081 and you’ll get a live person, not a voicemail, 24 hours a day.
We work the older streets around Cherry Lane, Gibbs Drive, and the neighborhoods hugging Silver Creek and Bomber Road every week. The housing stock here was built to house Carswell AFB families and workers, and those gates are now sixty to seventy years old. That’s not a problem we run from. It’s the work we know best.
Why Warden Gate Repair Is White Settlement’s Preferred Gate Repair Company
White Settlement homeowners don’t hand out trust quickly, and we understand why. You live next to an active military installation. You think about who’s coming up the driveway before you open the door. That’s exactly why our process was built the way it was. Every technician we send into White Settlement is background-checked, identity-verified, and photo-badged under The Threshold Standard. You get the tech’s name and photo before the visit, and they show a photo ID badge at your door. No anonymous van. No stranger.
Our local reputation is built on the 365-Day Done Right Promise. If a gate repair we do in White Settlement isn’t right, we come back and make it right, free. That’s in writing, on every job. Founded in 2008 as part of the Threshold Group family, Warden Gate Repair specializes exclusively in gates and gate operators. We don’t do gutters, we don’t do fences, we don’t do handyman work. Gate repair is the whole job. Gate Repair in White Settlement is our daily work, and it’s why we carry parts for brands like Linear, Viking, and DoorKing on our trucks.
Sliding Gate Repair in White Settlement
Sliding gate repair in White Settlement usually comes down to track alignment, roller wear, or a gate motor (the box that slides your gate automatically) that has burned out trying to push a gate that won’t roll. The good news is that most sliding gate problems are mechanical, not electrical, and a competent reset or roller swap runs $240 – $680. If the operator itself is dead, a replacement installed in White Settlement typically lands between $900 and $2,200 depending on the brand and the gate’s weight.
Track And Roller Work On Older Sliders
Sliding gates in this city are rare compared to swing gates, because most White Settlement lots are small and mid-sized, and ranch-era driveways here were built for single-swing panels. When we do see a slider, it’s usually a newer retrofit on a corner lot or a commercial-styled residential install. The usual failure is track wear from clay soil tracked onto the rail, so we clean, re-align, and replace rollers rather than jumping to a new gate.
Operator Replacement The Right Way
If the gate motor has failed, we don’t just bolt on the same model and walk away. We check the gate’s travel weight, confirm the track is level, and only then install the right rated operator from Viking, Linear, or DoorKing. The written price includes the operator, labor, and safety edge alignment, and you approve it before we open the first panel.
Wrought Iron Gate Repair in White Settlement
Wrought iron gate repair in White Settlement is less about the iron than about what’s under it: concrete footings poured shallow into expansive clay. A gate that sags on a ranch home off Cherry Lane is almost never because the iron bent. It’s because the hinge post has rotated in its footing, year after rain-drought cycle, until the panel drags and the latch won’t line up. That’s the repair we do most here, and it runs $280 – $700 for a full post re-set, re-pour, and re-hang.
Rust Repair And Weld Work
Tarrant County’s freeze-thaw cycles and summer humidity put real stress on older iron. We do weld repair on cracked scrollwork and bottom rails where rust has eaten through, and we treat the repaired sections to stop the corrosion from spreading. If the gate’s structure is too far gone, we’ll tell you straight: sometimes replacement is the cheaper answer.
Retrofitting Old Iron For Modern Operators
Many White Settlement homeowners want to add an automatic opener to a wrought iron gate that’s been manual since the Kennedy administration. That’s doable, but the gate has to hang true first. We re-set posts, re-plumb the hinges, and only then mount the operator, because any automation bolted to a leaning gate will fail in months. The rework plus operator install usually runs $1,400 – $2,800 depending on gate weight.
Trusted Brands We Service in White Settlement
We’re factory-trained on nine major gate and opener lines, and our trucks carry parts and control boards for Linear, Viking, DoorKing, and Ghost Controls, plus LiftMaster, FAAC, BFT, Elite, and Mighty Mule. That matters in White Settlement because the old Carswell-era gates run on hardware that big-box stores don’t stock. When we diagnose a dead board or a stripped gear, we usually have the replacement on hand and can finish the job in one visit. No “we’ll order the part and call you back in two weeks.”
Common Gate Repair Problems We See in White Settlement Homes
- Rotated hinge posts. The single most common problem in White Settlement. 1960s-era posts were set shallow in pure clay backfill, and decades of rain-drought cycles have pushed them out of plumb. The gate drags, the latch won’t catch, and it looks like a hardware problem when the footing is the actual failure.
- Dead operators after ice storms. North Texas ice loads short out control boards and bend lightweight aluminum frames. We saw a wave of these calls after the last hard freeze, especially on older swing gate openers that were never rated for ice loading. Sometimes the board is salvageable. Often replacement is the honest answer.
- End-of-life latch and hinge hardware. Chain-link and wrought iron swing gates from the 1950s – 1970s use hinge pins, latches, and rollers that are hard to source. We fabricate or retrofit modern equivalents rather than trying to patch sixty-year-old stamped metal that fails again in a year.
- Safety photocell faults on retrofitted automatic gates. Many White Settlement openers were added years after the gate was first hung, and the photocells were mounted where the gate’s arc or the driveway slope creates false trips. We re-position the eyes and re-wire them so the gate stops properly without nuisance reversals.
Pricing for Gate Repair in White Settlement, TX
Here’s what to expect, honestly. A post re-set and re-plumb in White Settlement runs $280 – $700 depending on footing depth and concrete condition. Hinge and latch replacement on an old swing gate runs $120 – $350. A full gate realignment with roller replacement is $180 – $450. Operator replacement, including the motor, labor, and safety edge, lands between $900 and $2,800. Weld and rust repair is quoted by the linear foot and usually falls between $150 and $500 for typical residential work. We hand you a written price before any work begins, and it doesn’t change at the end unless you add scope. Estimates are free. Call (828) 426-7081 and we’ll walk you through it.
We Also Serve Cities Near White Settlement
Our routing covers the west side of the Metroplex, including nearby White Settlement neighborhoods and the surrounding DFW area. We also run service calls to Houston, San Antonio, Dallas, and Fort Worth for homeowners who need the same name-and-photo confirmation and written upfront pricing. If you’re anywhere in that radius, call and ask for Cole’s team.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in White Settlement
It’s the post, almost always. White Settlement gates from the 1950s – 1970s were set in shallow footings dug into expansive clay, and the clay heaves and contracts with every rain-drought cycle. The post rotates out of plumb, the panel drags, and it looks like a bad hinge. A hinge replacement won’t hold on a rotated post, so the correct repair is a post re-pour and re-hang, which runs $280 – $700. Call (828) 426-7081 for a written quote.
If the operator is more than 10 – 12 years old and the control board is fried, replacement is usually the cheaper answer in the long run, because a new board on an old motor leaves you with the same worn gears and bearings. On a newer unit, we can often repair the board or replace just the damaged component. Operator replacement in White Settlement runs $900 – $2,800 depending on the brand and gate weight, and we install Viking, Linear, DoorKing, and other brands same-week. Call (828) 426-7081 and we’ll tell you straight which one makes sense.
Yes, and if your gate operator was installed before the current safety standard, it likely doesn’t. UL 325 compliance means the operator must have appropriate entrapment protection: a safety edge or photocells that stop and reverse the gate if it contacts or detects a person. We retrofit existing gates in White Settlement with current safety edges and photocells as part of any operator replacement or major repair. The safety hardware is included in the written price. Call (828) 426-7081 to have yours checked.
Most of them can be repaired and re-hung, because the iron itself is usually sound. What fails on these older gates is the post footing, the hinge pins, and the latch hardware. We re-pour rotated posts, weld cracked iron as needed, and retrofit modern hinges and latches that don’t rely on sixty-year-old stamped parts. Replacement only makes sense when the frame is rusted through structurally, and we’ll tell you that honestly. A typical repair runs $120 – $700. Call (828) 426-7081 for a free assessment.
Because the city’s housing stock was built on small to mid-sized lots for Carswell AFB workers and families, and a single-swing panel was the cheapest, simplest gate that fit the driveway width. Those original ranch-era gates are now at end-of-life, and many owners are retrofitting them with automation rather than replacing them with dual-panel sliders, which need more track space than most White Settlement driveways have. We can automate an existing swing gate properly after re-setting the posts, running $1,400 – $2,800. Call (828) 426-7081 and we’ll measure your driveway and give you a written price.
Call Warden Gate Repair for Gate Repair in White Settlement
If your gate is dragging, dead, or won’t lock, call (828) 426-7081 now. You’ll talk to a live person, we’ll send a named, photo-badged technician to your White Settlement home, and you’ll get a written price before any work starts. Every repair carries the 365-Day Done Right Promise: if it’s not right, we come back and make it right, free. That’s the whole idea behind the name. A warden is trusted to watch over a place and keep it secure. Your gate should do the same.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving White Settlement and the greater DFW area since 2008.