Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Half Moon Bay, CA
We’re Warden Gate Repair, the gate company Half Moon Bay homeowners call when a gate won’t open, won’t close, or won’t stop grinding. Half Moon Bay jobs are different from the rest of the Bay Area because the Pacific is right there. Salt fog, damp air, and heavy farm and equestrian gates take a toll on hinges, motors, and electronics faster than almost anywhere else on the peninsula. If your gate is acting up, call us at (828) 426-7081 and we’ll tell you who’s coming and what it will cost before any work starts.
Why Half Moon Bay Homes Are Different
Half Moon Bay sits directly on the Pacific coast, and the ocean shapes nearly every gate repair we do here. The marine layer rolls in most mornings and evenings, leaving salt-laden moisture on metal surfaces for hours at a time. Standard steel hinges and latches that survive years in Redwood City or San Jose corrode in a fraction of that time here. We see rusted hinge pins, seized latch mechanisms, and motor housings with salt creep inside the wiring compartment on a regular basis.
The housing stock adds another layer. In-town neighborhoods near Main Street trend toward mid-century cottages with lighter ornamental gates, often wood or wrought iron on smaller residential lots. But drive a few minutes toward the hillsides or out toward the flower farms and horse properties, and the picture changes. Those gates are wide, heavy, and motorized, built to handle daily passes from farm trucks, trailers, and equipment. A gate on a coastal bluff above Dunes Beach faces different stresses than one on a shaded lot in the Alsace Lorraine neighborhood, and the hardware has to match the actual conditions, not a one-size-fits-all spec.
There’s also a permitting reality worth knowing. Much of western Half Moon Bay falls inside the California Coastal Zone. If a gate replacement or new installation sits within it, San Mateo County’s Local Coastal Program may require a Coastal Development Permit before work can proceed. We flag this early in the process so a repair doesn’t stall for weeks waiting on paperwork.
Our Main Half Moon Bay Services
Half Moon Bay homeowners call us most often for two things: a gate that’s physically damaged or sagging, and a gate motor that’s stopped responding. Here’s what each one involves out here.
Gate Repair in Half Moon Bay
Gate repair on the coast usually means rusted hinges, sagging weld joints, bent track sections on sliding gates, or a latch that no longer catches. The salt air accelerates all of it. We inspect the full gate path, replace or reinforce the failed hardware, and set the gate so it clears properly without dragging. On coastal properties we recommend marine-grade stainless hardware wherever steel has failed once before, because the same moisture that killed the original part will go after the replacement just as aggressively. Read more about how we handle these jobs on our Gate Repair in Half Moon Bay page.

Electric Gate Repair in Half Moon Bay
An electric gate that won’t open is usually a problem in the low-voltage circuit, the safety photo eyes, the keypad, or the control board. Damp, salty air is hard on every one of those components. We trace the fault from the control board outward, replace what’s failed, and test the safety reversing function before we leave. The written price comes before any work starts, and it doesn’t change at the end unless we find something new and discuss it with you first. See our Electric Gate Repair in Half Moon Bay page for the full breakdown.

Gate Motor Repair in Half Moon Bay
The gate motor is the box that slides or swings your gate automatically. In Half Moon Bay, moisture intrusion into the motor housing and gearbox wear from heavy gates are the two most common failures we see on farm and equestrian property entrances. We open the unit, check the gears, capacitor, and limit switches, and give you a straight answer on whether a component swap will hold up or a full motor replacement makes more sense. Details and pricing are on our Gate Motor Repair in Half Moon Bay page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Half Moon Bay
Our technicians are factory-trained on the brands most common along the coast, including Ghost Controls, Viking, and DoorKing. We stock a range of common parts for these systems locally, which means many Half Moon Bay repairs are completed in a single visit. You can see the full list on our brands page.
Pricing for Gate Company in Half Moon Bay, CA
Every job gets a written price before the work starts. Here’s what gate work typically runs in Half Moon Bay.
| Service | Typical range in Half Moon Bay |
|---|---|
| Gate visual inspection | $75 – $150 |
| Hinge replacement | $160 – $340 |
| Sagging gate repair | $190 – $380 |
| Latch or lock replacement | $140 – $290 |
| Track realignment | $180 – $350 |
| Gate motor replacement | $450 – $950 |
| Control board repair | $280 – $520 |
| Safety sensor replacement | $150 – $300 |
| Keypad replacement | $180 – $350 |
Two things push prices toward the upper end in Half Moon Bay: marine corrosion that requires grinding out rusted fasteners and fitting marine-grade replacements, and heavy ranch gates that need larger motors and reinforced mounting plates. Whatever the number, you get it in writing before we pick up a tool.
Neighborhoods We Serve in Half Moon Bay
We work across the whole Half Moon Bay area, from the in-town neighborhoods near Main Street out to the coastal and hillside parcels. Here are a few of the areas we regularly serve:
- Alsace Lorraine
- Ocean Colony
- Pillar Ridge
- Granada
- Miramar
Most Half Moon Bay calls are answered the same day, and we schedule emergency gate failures as soon as a tech is in the area.
Service Area – Cities Near Half Moon Bay
Beyond Half Moon Bay, we work along the coast and up over the hill. That includes El Granada, CA just north of town, plus Burlingame, CA, Millbrae, CA, and Belmont, CA on the other side of the Santa Cruz Mountains. Dispatch and scheduling coordinate from our San Francisco Bay Area office, with crews serving Half Moon Bay locally.
Serving Half Moon Bay, CA - Our Local Coverage Area
We’re based in the Half Moon Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Half Moon Bay
We answer the phone live 24/7, and for a gate stuck open or a motor that won’t respond, we schedule the earliest available tech. Most Half Moon Bay emergencies are handled same day or the next morning, depending on call volume and where our crews are at that moment.
Repairs that swap hardware in place almost never need one. A full replacement or new installation west of Highway 1 may fall within the California Coastal Zone, which can trigger a Coastal Development Permit through San Mateo County. Call us first and we’ll tell you whether your property is affected before you spend time or money.
Yes. We serve the in-town neighborhoods, the coastal communities like Miramar and El Granada, and the rural parcels further up Higgins Canyon Road and Purisima Creek Road where farm and equestrian gates are common.
If your gate is giving you trouble, call us at (828) 426-7081 for a free estimate. You’ll get a name, a photo of your technician, and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Half Moon Bay Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.





Before
After
Before
After
Before
After