Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hayward, CA
Warden Gate Repair is the gate company Hayward homeowners call when a gate stops closing, starts dragging, or leans far enough to scrape the driveway. We handle gate repair, electric gate repair, and gate motor repair across the flatlands and the hills, and we do it with one rule that shapes everything else: you know who’s coming before we knock, and you know the price before we turn a wrench. Call us at (828) 426-7081 and you’ll talk to a real person, not a phone tree.
Why Hayward Homes Are Different
Hayward sits on ground that moves. The Hayward Fault runs straight through the eastern hills, and it doesn’t always announce itself with an earthquake. It creeps. Slowly, constantly, measurably. Curbs in the hills show lateral offsets over the years, and gate posts do too. We regularly find posts that have rotated or canted a few degrees out of plumb, not because a car hit them or the wood rotted, but because the soil beneath the footing shifted over months. That means the fix isn’t rehanging the gate. It’s re-setting the footing. If a technician doesn’t understand aseismic creep, they’ll replace hinges, hand you an invoice, and the gate will lean again by next spring. We understand it because we see it every week in the neighborhoods along the fault trace.
Down in the flatlands along Mission Boulevard and South Hayward, the story is different. Post-WWII tract homes from the 1940s through the 1960s make up much of the housing stock, and a lot of those side-yard gates are original or early replacements. Ornamental iron with rusted welds. Wood gates with seized pivot hinges. Many of these properties are rentals, too. Hayward has a high renter-to-owner ratio, and investment-property gates tend to run until they fail completely. By the time we get the call, the gate isn’t sticking. It’s on the ground. Full-assembly replacement is more common here than minor repair.
And then there’s the bay air. The western flatlands sit close enough to San Francisco Bay that marine-layer fog rolls in most mornings, and the air carries salt. Uncoated steel and wrought iron rust through in five years or less in this climate. A gate that looks fine from ten feet away may have hinge brackets that are paper-thin at the weld points. We see that constantly. It changes what we recommend and how we quote.
Our Main Hayward Services
Most Hayward calls come down to one of two problems: a gate that won’t move at all, or a gate motor that quit doing its job. Here’s what each involves here, and where to go for the full detail.
Gate Repair in Hayward
Hayward gate repair usually means fixing sagging, rusted, or leaning gates on older homes. The hillside jobs involve footing work from fault creep, while flatland jobs more often mean weld repair, hinge replacement, or full panel replacement on corroded iron. We inspect the post alignment first because in Hayward, a crooked gate is usually a symptom of what’s happening below ground, not just a worn hinge. Learn more about Gate Repair in Hayward.
Electric Gate Repair in Hayward
Electric gate repair in Hayward means diagnosing the full system: motor, control board, safety sensors, and the wiring between them. Salt air corrodes low-voltage wiring connections faster than most people expect, and moisture in the control box is a recurring issue in the fog belt west of the hills. We carry the common boards and sensors for the major brands so we’re not waiting on a distributor for a simple fix. Learn more about Electric Gate Repair in Hayward.
Gate Motor Repair in Hayward
The gate motor (the box that slides or swings your gate automatically) takes a beating in Hayward. Sea air, clay soil shifting mount points, and years of hard use on rental-property gates all contribute. We diagnose motor failures down to the component level where it makes sense, and we replace the motor when it doesn’t. Learn more about Gate Motor Repair in Hayward.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hayward
Our trucks are stocked for the brands we see most in Hayward: FAAC, BFT, Linear, and Viking. That means fewer jobs put on hold while a part ships. If your opener runs on something else on our full our brands list, we’ll confirm parts availability before we schedule.
Pricing for Gate Company in Hayward, CA
Here are the price ranges you can expect in Hayward. The exact quote is always written down and agreed to before any work starts.
| Service | Typical range in Hayward |
|---|---|
| Gate repair diagnostic visit | $49 – $129 |
| Gate hinge replacement (pair) | $140 – $320 |
| Gate weld repair | $110 – $260 |
| Gate post re-set (fault creep or heave) | $320 – $720 |
| Full ornamental iron gate replacement | $1,400 – $3,600 |
| Electric gate diagnostic and board repair | $180 – $420 |
| Gate motor replacement | $480 – $1,150 |
| Safety sensor replacement | $140 – $310 |
| Control board replacement | $260 – $580 |
| Full gate automation package (motor, arms, safety edges) | $2,600 – $5,400 |
What pushes a Hayward quote toward the top of those ranges is usually footing work. If a post has to be excavated and re-set because the ground moved, that’s a different job than swapping hinges. Rusted hardware that snaps during removal also adds time. Whatever the final number, you’ll see it in writing before we start.
Neighborhoods We Serve in Hayward
We work throughout Hayward, from the Mission Boulevard corridor up into the hills. These are a few of the areas we’re in most often.
- Hayward Hills
- South Hayward
- Fairway Park
- Longwood
- Burbank
Most non-emergency visits in Hayward can be scheduled within one to three business days. If a gate is stuck open and can’t be secured, tell the person who answers the phone and we’ll treat it as an emergency.
Service Area – Cities Near Hayward
Beyond Hayward, we cover neighboring communities across the East Bay and Tri-Valley. You’ll find us in Dublin, CA, Pleasanton, CA, San Ramon, CA, and Livermore, CA. Dispatch is coordinated from our San Francisco Bay Area office, with crews serving Hayward locally.
Serving Hayward, CA - Our Local Coverage Area
We’re based in the Hayward area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hayward
Emergency calls in Hayward are handled as quickly as possible, often same-day if a gate is stuck open or won’t secure. Standard repairs are typically scheduled within one to three business days. Call us at (828) 426-7081 and describe what’s happening; you’ll get a straight answer on timing.
Most gate repairs and like-for-like replacements don’t require a city permit in Hayward. New gate posts and footings may be different, depending on the project. We’ll tell you what your job needs before quoting. Call (828) 426-7081 for a free estimate.
Yes. We serve the flatlands, the hills, and everything between, including South Hayward, the Mission Boulevard corridor, and the neighborhoods along the fault trace. Need us out your way? Call (828) 426-7081 and we’ll confirm the schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hayward Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.