Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hicksville, NY
Gate repair in Hicksville usually costs between $180 and $780 depending on what failed, and most jobs can be scheduled within one to two days. We’re a gate-specific company, not a general contractor, which matters in a town where most gates were added to 1950s and 60s homes decades after the house was built. Those retrofit jobs fail in predictable ways: leaning posts, corroded hinges, and opener arms fighting gates that no longer sit square. If your gate is sagging or your opener is grinding, call (828) 426-7081 and we’ll give you a written price before any work starts.
Why Hicksville Homes Are Different
Hicksville’s housing stock is overwhelmingly post-WWII: Cape Cods, split-levels, and ranches on 60-by-100-foot lots. None of those homes were built with gate infrastructure. No conduit, no reinforced post footings, no dedicated power runs to the driveway. When a gate was added later – and there are thousands of decorative wrought-iron and aluminum driveway gates across Hicksville’s South Asian community, where ornamental entrances are a strong cultural preference – the post was usually sunk into an existing concrete walk or driveway apron at whatever depth the installer could manage. The result is a chronic pattern we see in Hicksville more than anywhere else on this side of Nassau County: posts that lean within a few winters, gates that drag, and opener motors that burn out trying to move a gate that no longer swings true.
The climate compounds it. Salt-laden air from the Atlantic, about 20 miles south, works on wrought-iron hardware year-round. Freeze-thaw cycles heave shallow footings out of plumb every winter. By spring, a gate that was fine in November is catching on the latch or sagging at the hinge side. Hicksville’s tight lot lines add a third wrinkle: gates frequently sit within inches of a property boundary, and a post that shifts even a few degrees can encroach on a neighbor’s parcel – something Nassau County takes seriously when a complaint is filed.
Our Main Hicksville Services
These are the three jobs Hicksville homeowners call us about most. Each has its own page with full pricing and local detail.
Gate Repair in Hicksville
Most Hicksville gate repairs come down to two things: a post that has shifted out of plumb, or hardware that has corroded in the salt air. We re-set posts, replace hinges and latch hardware, straighten sagging gate frames, and get the gate swinging cleanly again. On retrofit gates, we often find the original post was set too shallow for Nassau County’s frost line, which is why the gate leaned in the first place. We fix the root cause, not just the symptom. Full detail is on the Gate Repair in Hicksville page.
Electric Gate Repair in Hicksville
Electric gates in Hicksville tend to fail at the connection points: corroded wiring, water in the junction box, or a limit switch that stopped reading correctly. We test the full circuit from the control board to the actuator, replace what is shorted or seized, and re-set travel limits so the gate closes fully without slamming. If your gate opens but won’t close, or closes halfway and reverses, that is almost always a sensor or limit issue. See Electric Gate Repair in Hicksville for pricing and scope.
Gate Motor Repair in Hicksville
The gate motor – the box that slides or swings your gate automatically – works harder in Hicksville than it should. When a post leans, the motor strains against the misalignment on every cycle, which shortens its life. We diagnose motor failures, replace gear assemblies and control boards where the motor is worth saving, and install new motors when the old one is beyond repair. We carry parts for the brands most common in Hicksville’s retrofit installations, so we’re not waiting on a week of shipping. Details are on the Gate Motor Repair in Hicksville page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hicksville
We’re factory-trained on FAAC, BFT, Linear, and Viking equipment, among others, and we keep common parts for those brands in local stock. That means a failed control board on a BFT or a seized FAAC actuator often gets repaired same-visit rather than after a parts order. See our brands page for the full list.
Pricing for Gate Company in Hicksville, NY
| Service | Typical range in Hicksville |
|---|---|
| Service call + diagnosis | $75 – $125 |
| Hourly repair labor | $85 – $110 per hour |
| Hinge replacement | $110 – $220 per hinge |
| Gate post reset / reinforcement | $260 – $580 |
| Gate frame straightening | $180 – $400 |
| Gate opener troubleshooting | $150 – $300 |
| Gate motor repair | $340 – $580 |
| Gate motor replacement | $680 – $1,090 |
| Control board replacement | $280 – $450 |
| Limit switch / sensor repair | $110 – $220 |
Two things push Hicksville prices toward the upper end of those ranges: post problems and corrosion. If we have to dig out and re-set a post that was originally sunk too shallow, that is half a day of work with concrete and cleanup. If hardware has rusted to the point that bolts snap on removal, that adds labor time. Either way, the price we quote is the price you pay – written down before work starts, no surprise line items at the end.
Neighborhoods We Serve in Hicksville
We serve all of Hicksville, including the older Cape Cod streets around the LIRR station and the ranch-home blocks further north and east. Our technician typically reaches most Hicksville addresses within 45 to 60 minutes once scheduled.
- Central Hicksville near the LIRR station
- North Hicksville off Old Country Road
- The ranch home blocks east of Newbridge Road
- South Hicksville toward Levittown
- The split-level subdivisions west of South Oyster Bay Road
Service Area – Cities Near Hicksville
We also serve homeowners in neighboring towns across Nassau County and beyond. If you’re in Levittown, NY, Hempstead, NY, Freeport, TX, or Long Beach, NY, you’re within our service area, and the same written-price guarantee applies.
Serving Hicksville, NY - Our Local Coverage Area
We’re based in the Hicksville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hicksville
Most non-emergency repairs are scheduled within one to two days. Our technician typically reaches Hicksville addresses within 45 to 60 minutes of the scheduled window. We can often accommodate same-visit repairs when parts are in local stock.
Repairing an existing gate with replacement parts generally does not trigger a Nassau County permit. New gate installations and structural post work can, especially near property lines. We’ll tell you before work starts if your job falls into permit territory, and we’ll wait for the permit if required.
Yes. Most gates in Hicksville were retrofitted onto 1950s and 60s homes, and the original installer is often long gone. We work on any existing gate regardless of who installed it, and we’ll tell you honestly if the underlying post work is worth saving or needs to be redone.
If your gate is sagging, grinding, or stopped working entirely in Hicksville, call (828) 426-7081. We’ll give you a written price before any work begins, and every repair is covered by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hicksville Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.