Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Highlands, TX
Gate repair in Highlands, TX follows the land itself: flat, flood-prone, and corrosive. Most of the driveways we service here are long gravel runs off ranch-style lots, with swing or slide gates that have been through years of Gulf humidity and at least one serious flood since Harvey. If your gate drags, won’t latch, or the motor sounds like it’s chewing gravel, call us at (828) 426-7081 and we’ll send a technician whose name and photo you see before they arrive.
Why Highlands Homes Are Different
Highlands sits right where the Houston Ship Channel’s industrial corridor meets the San Jacinto River lowlands. That geography does two things to gate hardware. First, the air carries sulfur compounds and hydrocarbons from nearby petrochemical facilities, which chew through hinges, seals, and motor casings faster than you’d see anywhere west of Houston. Second, the ground beneath the gate is heavy clay that swells when wet and shrinks when dry. After a big rain, posts that looked plumb in June can be racked half an inch out by August.
The housing stock here compounds it. These are semi-rural acreage lots, decades-old ranch homes with steel gate frames that were built before automated operators became standard. Many still run early-generation openers or are still manual. When the clay moves and the steel rusts, a gate that has worked for twenty years can suddenly refuse to close all the way. That’s the Highlands pattern: corrosion from above, movement from below.
Our Main Highlands Services
Homeowners in Highlands call us most about two things: gates that have stopped moving entirely, and gate motors that run but don’t do what they’re told. Here’s how each plays out locally.
Gate Repair in Highlands
Repair work in Highlands usually starts with the frame and hinges, because corrosion is the first failure point. We see rusted hinge barrels, sagging leaf hinges, cracked steel posts, and latches that have seized from salt air and industrial fallout. Most jobs also involve re-leveling a gate that the clay has shifted out of line. We quote a written price before any work starts, then fix what’s actually wrong. Gate Repair in Highlands
Electric Gate Repair in Highlands
Electric gate issues here tend to follow weather events. Flooded control boxes, corroded wiring junctions at the post, photo-eyes caked with silt, keypads that short after a hard rain. The first visit usually involves testing the circuit path and replacing what the moisture got into. The 365-Day Done Right Promise covers the repair: if something fails, the return visit is free. Electric Gate Repair in Highlands
Gate Motor Repair in Highlands
The gate motor (the box that slides or swings your gate automatically) works harder in Highlands than it should, because the gate itself is often binding slightly from post movement or hinge corrosion. That binding overheats motors and strips gear racks. We diagnose the motor first, then correct whatever upstream problem forced it to strain, so the replacement doesn’t burn out the same way. Gate Motor Repair in Highlands
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Highlands
We service Viking, Ghost Controls, DoorKing, and Elite equipment on Highlands properties, and we carry the common replacement parts for these brands on the truck. That matters here because a Gate motor that fails after a flood usually needs parts the same week, not in ten days. See the full lineup on our brands page.
Pricing for Gate Company in Highlands, TX
| Service | Typical range in Highlands |
|---|---|
| Gate repair service call | $75 – $125 |
| Gate hinge replacement | $150 – $350 per hinge |
| Gate post re-setting | $200 – $600 |
| Gate frame welding repair | $150 – $400 |
| Gate opener repair | $175 – $450 |
| Gate motor replacement | $350 – $1,200 |
| Slide gate track repair | $200 – $500 |
| Electric gate control board replacement | $250 – $650 |
| Solar gate opener repair | $175 – $400 |
| Gate keypad or intercom replacement | $150 – $400 |
In Highlands, two things push cost higher than the base ranges: post work, because re-setting steel posts in clay that’s already shifted takes concrete and time; and corrosion repair, when we have to cut out and replace more steel than expected. Whatever the job, the price is written down and agreed to before we touch anything. No surprise line items at the end.
Neighborhoods We Serve in Highlands
We cover the full Highlands area, from the acreage off Wade Road south toward the river, to the smaller residential streets north of the channel. Most calls are within a short drive, and we schedule the same day when we can.
- Highlands proper
- Burnet Park area
- San Jacinto River estates
- Wade Road corridor
- North Shore side of Highlands
Service Area – Cities Near Highlands
From our Highlands base we also run calls into Channelview, TX, Baytown, TX, La Porte, TX, and Deer Park, TX. Same Threshold Standard on every visit: background-checked technician, photo sent ahead, written price before work.
Serving Highlands, TX - Our Local Coverage Area
We’re based in the Highlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highlands
Most Highlands repair calls are scheduled same-day or next-day, because we keep a local crew in the area. If your gate is stuck open or won’t close and you have pets or kids, tell the dispatcher and we’ll prioritize it. Call (828) 426-7081 and a live person answers, day or night.
Most unincorporated Highlands properties have no HOA gate restrictions, and gate repair on existing posts rarely requires a permit. If you’re unsure, call us with your subdivision name and we’ll tell you what typically applies in your part of Highlands before we book the visit.
Turn the gate operator off at the breaker or disconnect switch first, then check whether the gate itself still moves freely by hand. If it drags or won’t latch, that’s post movement or debris in the track. Call us at (828) 426-7081 and we’ll send a technician with a written quote before any repair begins.
Ready to get your gate working again? Call Warden Gate Repair at (828) 426-7081 for a free estimate, delivered in writing before any work starts in Highlands.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highlands Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.