Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Melissa, TX
Gate repair in Melissa usually costs $200 – $475 for a post re-set, $180 – $340 for a spring or hinge replacement, and $250 – $650 for a gate motor replacement, depending on the gate’s size and how far the Blackland Prairie clay has pushed things out of square. We know this from years of walking Melissa driveways and figuring out why a gate that looks almost brand new suddenly won’t close. Call (828) 426-7081 and we’ll give you a written price before any work begins. If you need a quick overview of what we do, start with home.
Why Melissa Homes Are Different
Melissa is one of the fastest-growing cities in the United States. Nearly all of its residential housing was built after 2015 in master-planned HOA communities like Bridgewater, and those homes came with the same thing: builder-grade automated gate operators paired with ornamental iron or steel swing and slide gates. That means Melissa now has thousands of driveway and neighborhood entrance gates hitting their first major service cycle at roughly the same time.
But the bigger problem is underneath every one of those gates. Melissa sits on the Blackland Prairie, where the shrink-swell clay expands with spring rain and contracts hard in summer drought. The soil moves enough to heave and tilt gate posts installed as recently as 2019 – 2021, throwing sensors, limit switches, and latches out of alignment on gates that look brand new from the street. Add the January – February ice storms common to Collin County, which freeze and crack exposed operator housings and damage circuit boards, and you’ve got a repair pattern that’s specific to this city. A gate tech working Melissa’s newer subdivisions learns to check post plumb before anything else. If we set the footer right, the gate stays square. If we skip it, you’re calling us again after the next wet season.
Our Main Melissa Services
Three repair jobs account for nearly everything we do in Melissa: a gate that won’t swing or slide, an electric system that stopped responding, and a motor that’s running but not moving the gate. Each has its own dedicated page because each has a different failure pattern here.
Gate Repair in Melissa
A Melissa gate that drags on the ground, won’t latch, or sits visibly crooked usually has a post problem, not a hardware problem. The clay soil under your post footer is moving. Our crews re-set the footer, re-plumb the post, and then replace the worn hinges, wheels, or latch parts that were damaged by the misalignment. We also repair cracks in welded steel frames and replace rusted sections on ornamental iron gates before they fail completely. See the full scope and local costs on our Gate Repair in Melissa page.
Electric Gate Repair in Melissa
When a gate stops responding to a remote, keypad, or vehicle loop, the fault is usually in one of three places: the control board, the safety sensors, or the wiring between them. Melissa’s freeze-thaw cycles and clay movement stress all three. We test each component in sequence, replace damaged circuit boards with factory parts, and reposition photo eyes and edge sensors so the gate closes without false reversals. Every diagnosis ends with a written price. See what’s covered in detail on Electric Gate Repair in Melissa.
Gate Motor Repair in Melissa
A gate motor (the box that slides or swings your gate automatically) that hums without moving, trips its breaker, or runs but won’t open fully is a common Melissa call after ice storms and wet springs. We open the housing, inspect the gear train and capacitor, and either replace the failed part or install a new operator matched to your gate’s size and cycle count. We stock common boards and motors for FAAC, BFT, Linear, and Viking systems and can often finish same day. Get the full breakdown on Gate Motor Repair in Melissa.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Melissa
Most Melissa gates run on builder-installed operators from FAAC, BFT, Linear, or Viking. We carry factory parts and control boards for those four brands in our local service vehicles, which means a motor or board replacement usually can be completed in one visit rather than two. See our brands for the full list.
Pricing for Gate Company in Melissa, TX
| Service | Typical range in Melissa |
|---|---|
| Gate post re-set (labor + materials) | $200 – $475 |
| Hinge replacement | $150 – $350 |
| Spring replacement | $180 – $340 |
| Gate wheel or roller replacement | $125 – $300 |
| Gate alignment (non-post issue) | $125 – $325 |
| Keypad or key switch replacement | $150 – $325 |
| Electric gate service call | $75 – $150 |
| Sensor replacement | $120 – $300 |
| Gate motor replacement | $250 – $650 |
| Control board replacement | $200 – $450 |
What pushes a Melissa price toward the higher end is almost always soil. A post that needs more concrete depth because the clay keeps moving costs more than a simple hinge swap, and we’ll tell you that before we start. Every job gets a written price agreed before work begins, with no surprise line items at the end.
Neighborhoods We Serve in Melissa
We run service routes through Melissa all week, including the newer HOA subdivisions and the few older streets that predate the building boom. Our typical response for a non-emergency call is same-day or next-morning when you reach us before noon.
- Bridgewater
- Liberty Ranch
- North Creek Estates
- Melissa Road corridor
- Villages of Melissa
Service Area – Cities Near Melissa
Melissa is our north Collin County anchor, and we regularly handle gates in the towns around it. If you’re a few minutes down the road, we’ve got you covered in Anna, TX, McKinney, TX, and Westminster, TX. We also serve the Princeton area at Princeton, FL.
Serving Melissa, TX - Our Local Coverage Area
We’re based in the Melissa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Melissa
We cover Melissa with local routes every weekday and keep a standby tech for emergencies on nights and weekends. Most non-emergency repair calls get same-day or next-morning service when booked before noon. Call (828) 426-7081 and a live person will tell you the earliest realistic slot.
Private driveway gates rarely need HOA approval to repair. Monument entrance gates are usually HOA-owned, so those go through the association. We can work directly with your HOA manager if that’s the case. You’ll still get the same written price and same guarantee.
We cover all of Melissa, from Bridgewater and Liberty Ranch to the roads closer to 75. If you’re in a neighborhood built after 2015, you’re in our regular service area. Scheduling is coordinated from our Dallas-Fort Worth office, and crews serve Melissa daily.
If your gate is dragging, crooked, or dead, call (828) 426-7081. We’ll tell you what’s wrong, what it costs, and who’s coming to your door before we ever send a truck.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Melissa Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.