Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in North Highlands, CA
Gate repair in North Highlands usually means one of two things: a tired 1960s chain-link swing gate that’s finally pulled its post out of true, or an electric opener that quit responding after a 105°F afternoon. Most calls we take in this part of unincorporated Sacramento County are for full replacements on the original gate hardware, not quick patch jobs. If your gate is sagging, sticking, or the motor just hums and does nothing, call (828) 426-7081 and we’ll tell you exactly who’s coming and what it’ll cost before any work starts.
Why North Highlands Homes Are Different
North Highlands grew up fast after World War II to house workers at McClellan Air Force Base. The streets around McClellan Park, along Watt Avenue and Roseville Road, are packed with ranch-style tract homes from the late 1940s through the 1960s. Those homes were built with galvanized chain-link perimeter fencing and swing gates, and the posts and hinges have now been in the ground for sixty to seventy years. When they fail, they fail together: rusted post bases, bent hinge pins, and gate frames that have been welded back so many times there’s nothing solid left to weld to.
The climate works against those old gates hard. Summer heat above 105 degrees bakes wooden gate frames until they check and warp out of square. Then the wet Sacramento winters, including the tule fog season, accelerate rust on every piece of steel hardware that wasn’t hot-dip galvanized. The dry-to-wet swing is unusually hard on wood joinery and on the concrete footings that hold gate posts. In North Highlands, a gate that worked fine in June can be dragging on the ground by February. We also see a lot of heavier commercial-grade chain-link and cantilever-style gates installed in the 1980s and 90s on streets near McClellan Park’s industrial edge, and those cantilever track systems need parts most suburban gate shops don’t stock.
The permitting reality also matters here. North Highlands is unincorporated Sacramento County, not a city, so anything requiring a permit goes through Sacramento County’s Department of Planning and Environmental Review. That distinction catches homeowners and even some contractors off guard, and it’s one of the reasons we handle the compliance conversation for you instead of leaving you to guess.
Our Main North Highlands Services
Most homeowners in North Highlands reach out to us for one of three situations: a gate that won’t open or close properly, an electric opener that’s stopped working, or a gate motor that runs but doesn’t move the gate. Each has its own page with pricing and local detail.
Gate Repair in North Highlands
A gate repair in North Highlands usually starts with the post. On the older chain-link and wood-frame gates in the tract neighborhoods, the post has rusted at the base or the concrete footing has cracked from decades of seasonal movement. We dig, reset, or swap the post, then address the hinge alignment so the gate swings level. On streets near McClellan Park, we get calls for the heavier cantilever-style gates whose track rollers have seized or worn flat. Whatever the style, you’ll get a written price before we touch a tool. Gate Repair in North Highlands
Electric Gate Repair in North Highlands
Electric gate repair here is often a battle with two things: heat and old wiring. Sacramento Valley summers cook control boards and transformers inside unvented metal enclosures, and many of the original low-voltage wire runs from the 1960s and 70s were never rated for the load a modern operator pulls. We also see corroded limit switches and failing safety loops on properties that rely on an automatic gate for daily access. We service LiftMaster, FAAC, BFT, Linear, and Viking equipment, with parts for most common failures on the truck. Electric Gate Repair in North Highlands
Gate Motor Repair in North Highlands
When the gate motor (the box that slides or swings your gate automatically) fails in North Highlands, the job is as much about the mount and the arm as the motor itself. On the tight side-yard clearances common to the post-WWII ranch lots around here, the operator arm often gets bent or the motor gets knocked out of alignment when the gate is forced open by hand. We also handle motor swaps on older FAAC and BFT swing operators that predate the current control-board generation. Before any replacement, we test the arm, the hinges, and the power supply so you don’t pay for a motor when the real problem is a hinge pin. Gate Motor Repair in North Highlands
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in North Highlands
We’re factory-trained on FAAC, BFT, Linear, and Viking, and we keep the most common North Highlands repair parts stocked locally so most electric gate jobs don’t wait on a shipment. If your opener is a different brand, our brands page lists the full line we service.
Pricing for Gate Company in North Highlands, CA
| Service | Typical range in North Highlands |
|---|---|
| Gate repair, basic (hinges, latch, post adjustment) | $180 – $340 |
| Full post reset with fresh concrete footing | $375 – $625 |
| Electric gate opener troubleshooting and service call | $150 – $225 |
| Control board replacement | $280 – $650 |
| Gate motor replacement (swing operator) | $700 – $1,450 |
| Remote / keypad programming and receiver | $120 – $210 |
| Safety sensor or safety loop repair | $150 – $325 |
| Chain-link swing gate full replacement (standard single) | $450 – $875 |
North Highlands prices run higher than average when the gate is a heavier commercial-style cantilever unit, when the original wiring must be replaced from the house to the gate, or when the post concrete needs complete removal rather than a re-set. Whatever the number, you’ll receive it in writing before any work begins, and it’s the number you pay.
Neighborhoods We Serve in North Highlands
We cover the full North Highlands area, including the older tract blocks and the commercial-adjacent streets near the McClellan Park perimeter. Typical response for a gate emergency is within a few hours; non-emergency service calls are scheduled on a set day and time.
- McClellan Park perimeter
- Tract blocks along Watt Avenue
- Roseville Road corridor
- Streets around North Highlands Park
- Unincorporated county areas east of I-80
Service Area – Cities Near North Highlands
Warden Gate Repair serves North Highlands and the surrounding Sacramento County and Placer communities. If you’re in Antelope, CA, Carmichael, CA, Rio Linda, CA, or Elverta, CA, the same live-person phone line and written-price policy applies to you.
Serving North Highlands, CA - Our Local Coverage Area
We’re based in the North Highlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Highlands
For a gate that’s stuck open, stuck closed, or blocking a vehicle, we typically arrive within a few hours anywhere in North Highlands. Call (828) 426-7081 and a live person – not a voicemail – will take your address and give you a realistic arrival window, plus the name and photo of your technician before they come.
Because North Highlands is unincorporated Sacramento County, any work requiring a permit falls under Sacramento County’s Department of Planning and Environmental Review. Most hinge, operator, track, and motor repairs don’t require a permit. For full structural replacement or new footings, we’ll tell you what the county requires and handle the paperwork so you don’t have to.
Yes. A large share of North Highlands gates are original chain-link or wood-frame swing gates from the 1950s and 60s, and we keep compatible hardware and post dimensions on the truck for those older builds. On the heavier 1980s-90s cantilever gates near McClellan Park, we source and stock the specific track rollers and truck assemblies most suburban shops don’t carry.
If your gate isn’t working the way it should in North Highlands, call (828) 426-7081. You’ll get a written price before any work starts, the name and photo of your technician before they arrive, and a 365-day guarantee on the repair itself.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Highlands Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.