Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Paterson, NJ
Gate repair in Paterson usually costs between $180 and $900, with most jobs falling in the $250 – $550 range. What makes Paterson different from the surrounding suburbs is the age and density of its housing: thousands of century-old brick row homes with narrow rear passageways protected by original wrought iron and ornamental steel gates. These gates, installed between the 1890s and 1930s, face corrosive Passaic River valley moisture and decades of freeze-thaw cycles that the newer suburban gates in neighboring towns never contend with. Call (828) 426-7081 for a written price before any work starts.
Why Paterson Homes Are Different
Paterson’s housing stock is overwhelmingly attached and semi-attached two- and three-family brick homes built from roughly 1880 to 1940. Most of these properties have narrow side passages and rear-yard access points secured by iron or steel swing gates, not the wide ornamental driveway openers common in Wayne or Clifton. The work we see here follows that pattern: failing hinges lag-bolted into crumbling mortar on historic brick pillars need masonry repair alongside any metal work, and the gate frames themselves are often original to the building.
Climate plays a heavy role. Paterson sits in the Passaic River valley, which traps moisture and accelerates rust on metal gates year-round. Winter freeze-thaw cycles, more pronounced in the valley than on the surrounding upland, seize hinges, crack welds, and heave concrete gate posts out of alignment. Spring is our busiest gate repair season in Paterson by a wide margin, because that is when the winter damage finally shows itself. On the lower-lying streets near the Passaic River, in parts of the 1st and 2nd Wards, periodic flooding has warped wooden gate frames and buried gate hardware in silt, so bottom-pivot hinges and drop-rod receivers are routinely rusted solid, a failure mode almost never seen in the drier uphill neighborhoods of the same city.
Our Main Paterson Services
Most Paterson homeowners reach out to us for one of two problems: a gate that will not open or close properly, or a gate motor that has stopped responding. Each service has its own dedicated Paterson page.
Gate Repair in Paterson
Most Paterson gate repairs involve century-old swing gates whose hinges have pulled loose from brick pillars or whose frames have sagged from years of rust and freeze-thaw stress. We weld, re-hang, and reinforce what can be saved, and replace what cannot, always starting with a written price. On many Paterson jobs, we are also re-setting the gate post into the masonry, because the original mortar has crumbled behind the hinge plate. Find the full breakdown on our Gate Repair in Paterson page.
Electric Gate Repair in Paterson
Electric gates in Paterson are often retrofits on older manual gates, so the wiring runs through narrow side passages and the operators sit exposed to valley moisture more than they would on a suburban driveway. We troubleshoot the full system, from the photo eyes and safety edges to the keypad and loop detector, and we carry parts for FAAC, BFT, Linear, and Viking operators. See what is covered on our Electric Gate Repair in Paterson page.
Gate Motor Repair in Paterson
When a gate motor fails in Paterson, the cause is usually one of three things: water intrusion from valley humidity, a control board damaged by a winter power surge, or a capacitor worn out from years of fighting a gate that was never properly balanced. We diagnose the motor and the gate together, because replacing the motor without fixing the underlying bind just burns up the new unit. Details are on our Gate Motor Repair in Paterson page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Paterson
We are factory-trained on the brands Paterson homes actually run: FAAC, BFT, Linear, and Viking, among others. Common control boards, remotes, and safety-edge parts are stocked locally for faster turnaround. See the full list on our brands page.
Pricing for Gate Company in Paterson, NJ
| Service | Typical range in Paterson |
|---|---|
| Hinge replacement (pair) on iron swing gate | $240 – $520 |
| Weld repair – cracked frame or sagging pickets | $220 – $480 |
| Gate post re-set into brick pillar | $280 – $600 |
| Full gate frame straightening and reinforcement | $380 – $850 |
| Electric gate opener motor replacement | $450 – $1,100 |
| Control board replacement (FAAC, BFT, Linear, Viking) | $300 – $750 |
| Safety edge or photo eye replacement | $180 – $420 |
| Keypad or remote programming call-out | $120 – $240 |
| Full gate and operator replacement (masonry in good shape) | $2,200 – $6,500 |
What pushes a Paterson job toward the higher end is usually the masonry: if the brick pillar itself needs rebuilding before hinges can be re-set, that adds real labor and material cost. Whatever the number, you receive a written price before any work begins, and that is the price you pay.
Neighborhoods We Serve in Paterson
We cover the entire city, from the riverside wards to the uphill neighborhoods where the freeze-thaw cycle hits differently. Most Paterson calls are answered by a live person 24/7, and we schedule crews across the city with next-day availability in most neighborhoods.
- Riverside / 1st Ward
- 2nd Ward
- Eastside
- South Paterson
- Hillcrest
Service Area – Cities Near Paterson
While this page is focused on Paterson, our service area covers the surrounding region. Homeowners in Jersey City, NJ and North Bergen, NJ can reach the same live-person scheduling line. We also route crews from other metros to Newark, TX and Union City, CA under the same Threshold Standard.
Serving Paterson, NJ - Our Local Coverage Area
We’re based in the Paterson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Paterson
Most Paterson calls are scheduled for the next business day. A live person answers the phone 24/7 at (828) 426-7081, so you can speak directly with someone about your gate problem and get a service window, not a voicemail.
Most hinge, weld, and motor repairs do not require a permit. Full gate replacement or significant masonry work on the supporting pillars may trigger a review, depending on the property. We handle the paperwork questions as part of the written estimate, before any work starts.
We serve all of Paterson, from the riverside 1st and 2nd Wards up through Eastside, South Paterson, and Hillcrest. The moisture and freeze-thaw problems change block by block, but the scheduling and written-price process stays the same everywhere.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Paterson Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.