Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Rowlett, TX
Rowlett gates take a beating that gates in neighboring suburbs don’t. Between the black clay soil that shifts posts out of alignment every wet-dry cycle and the Lake Ray Hubbard humidity that keeps rust moving year-round, a gate here fails faster and more predictably than the same hardware in Garland or Sachse. We’re Warden Gate Repair, and we work exclusively on gates, gate motors, and electric gate systems across Rowlett. If your gate drags, slams, won’t latch, or the motor just hums, call (828) 426-7081 and we’ll send a named technician with a written price before anything gets touched.
Why Rowlett Homes Are Different
Most of Rowlett’s housing stock was built between the mid-1980s and early 2000s, and a lot of it sits in HOA-governed subdivisions where the iron or steel driveway gate was installed to match a neighborhood standard. That means the hardware on your gate is often the same hardware two doors down and four streets over. When those gates start failing, they fail in clusters, and we can usually tell you what’s wrong from a phone description because we’ve fixed the identical setup a block away.
The bigger story is east of I-30. The EF4 tornado that tore through eastern Rowlett the day after Christmas in 2015 flattened neighborhoods near Dalrock Road and the lakefront. The rebuild that followed in 2016 and 2017 produced hundreds of new fences and gates installed within the same eighteen-month window, often from the same contractor supply runs. Those gates are now seven to nine years old and hitting their first major failure cycle at the same time. We’re seeing the same seized hinges, the same post lean, the same opener alignment drift across entire streets. Add the lakeside exposure, persistent humidity off Lake Ray Hubbard plus easterly wind, and iron gates here rust and corrode noticeably faster than landlocked suburbs a few miles away.
Our Main Rowlett Services
Rowlett homeowners most often call us for two things: a gate that won’t open or close properly, and a gate motor that stopped responding. Each has its own dedicated Rowlett page below.
Gate Repair in Rowlett
A sagging gate is rarely just a hinge problem here. The real culprit is usually the ground itself, the expansive black clay that swells after rain and contracts during dry stretches, slowly pulling posts out of plumb and throwing latches, hinges, and strike plates out of line. We’re Gate Repair in Rowlett, and we reset and reinforce posts, replace worn hinges, and realign the gate so it closes and latches like it should. Every repair gets a written price before work begins and is covered by the 365-Day Done Right Promise. If it fails, the return visit is free.
Electric Gate Repair in Rowlett
Electric Gate Repair in Rowlett usually comes down to one of three things: a bad limit switch, a failed safety sensor, or wiring that’s fatigued from years of movement and moisture. Lakeside humidity accelerates corrosion on exposed connections, which means we replace a lot of wire runs and control boards in the neighborhoods east of Dalrock. We carry parts for the major brands on the truck so most electric gate calls are resolved in one visit.
Gate Motor Repair in Rowlett
When the motor runs but the gate doesn’t move, or it moves in jerks, or the remote stopped working entirely, you’re looking at a Gate Motor Repair in Rowlett job. In Rowlett’s clay soil, we see a lot of motors working harder than they should because the gate itself is binding against a shifted post. We diagnose the whole system, not just the box, and explain exactly what’s failed and what it costs before we replace a single part.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Rowlett
We carry parts for Linear, Viking, Ghost Controls, and DoorKing on our Rowlett trucks, which means most motor and electric gate repairs don’t wait on a second visit. For the full list, see our brands.
Pricing for Gate Company in Rowlett, TX
| Service | Typical range in Rowlett |
|---|---|
| Gate realignment (adjusting hinges, latch, and post) | $140 – $260 |
| Gate hinge replacement (set of 2, heavy-duty) | $160 – $310 |
| Gate post reset (single post, includes concrete) | $220 – $420 |
| Latch and strike plate replacement | $90 – $180 |
| Electric gate opener wiring repair | $120 – $240 |
| Safety sensor or photo eye replacement | $110 – $200 |
| Gate motor replacement (standard swing or slide) | $450 – $1,100 |
| Remote reprogramming or new transmitter | $40 – $90 |
What pushes a Rowlett price toward the top of these ranges is usually what we find underground: a post that has to be dug out and re-set in fresh concrete, or a control board that’s been fried by a power surge and needs full replacement. What never changes is this: you get the written price before we start, and that’s the price you pay. No line items added at the end.
Neighborhoods We Serve in Rowlett
We work the full Rowlett footprint, from the lakefront streets east of Dalrock Road to the subdivisions west of Highway 66 and down through the newer builds near Miller Road. Most Rowlett calls get a same-day or next-day response.
- Dalrock corridor and lakeside neighborhoods
- Harbor Pointe
- Springfield Estates
- Waterview
- West Rowlett near Pecan Creek
Service Area – Cities Near Rowlett
If you’re on the Rowlett edge, you’re close to Garland, TX, Sachse, TX, Wylie, TX, or Sunnyvale, TX. Our crews work all of those areas from the same Dallas-Fort Worth dispatch, so the technician who shows up in Rowlett is the same standard of background-checked, photo-badged, named-before-arrival professional you’d expect anywhere.
Serving Rowlett, TX - Our Local Coverage Area
We’re based in the Rowlett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rowlett
Dispatch and scheduling run from our Dallas-Fort Worth office, but crews serve Rowlett as a local area and can reach most addresses within the same window regardless of which side of the city you’re on. You’ll always know who is coming before they arrive.
Most Rowlett HOAs care about the gate’s appearance, not the repair method. Repair work like hinge replacement, post reset, or motor swap usually doesn’t need approval. If you’re changing the gate’s style or color, check your HOA first. We match existing hardware whenever possible.
Most Rowlett calls get a same-day or next-day response, depending on where you are and what’s failed. Call (828) 426-7081, tell us what the gate is doing, and we’ll give you a straight answer on when a technician can be there, along with a written price range before anyone rolls out.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rowlett Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.