Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in San Bernardino, CA
Warden Gate Repair is the gate company San Bernardino homeowners call when a gate stops opening, sags on its hinges, or makes a sound it shouldn’t. This city pushes gate hardware harder than almost anywhere in the Inland Empire. We work on swing gates, slide gates, and the motors that run them, and we give every homeowner a written price before any work begins. For gate repair in San Bernardino, call us at (828) 426-7081.
Why San Bernardino Homes Are Different
San Bernardino sits at the mouth of Cajon Pass, and that geography dictates what fails on gates here. Gusts of 60 to 80+ miles per hour funnel through the pass during Santa Ana wind events, far stronger than what Fontana or Riverside typically see. A swing gate catches that wind like a sail. Hinges fatigue and snap. Posts lean. Slide gates get racked and jump their bottom roller tracks. The dominant failure modes in San Bernardino are structural, not cosmetic.
The housing stock compounds it. Much of the city is 1950s through 1970s tract homes with original wrought iron or chain-link driveway gates, installed for security decades ago and rarely maintained since. We regularly find severely rusted hinges, cracked welds, and rollers that have been fighting friction for years. Add some of the hardest groundwater in Southern California and summer temperatures that climb past 105°F, and steel frames corrode and wooden gates warp faster than manufacturer ratings assume. Repairing a gate here means understanding all of that, not just swapping a part.
Our Main San Bernardino Services
Most San Bernardino homeowners reach out for one of three reasons: a gate that won’t move properly, an electric system that stopped responding, or a motor that quit altogether. Each has its own page with full detail and pricing.
Gate Repair in San Bernardino
A leaning post, a hinge that screams, a slide gate that’s off its track – these are everyday calls in San Bernardino, especially after a Santa Ana event racks the frame. We repair the structure, not just the symptom. On a swing gate, that means checking the hinge welds and post plumb. On a slide gate, it means inspecting the bottom guide bracket and the roller track. If you’ve got a gate that’s binding, sagging, or failing to latch, Gate Repair in San Bernardino covers what we do and what you’ll pay.

Electric Gate Repair in San Bernardino
Electric gates don’t like San Bernardino summers. Heat degrades the rubber seals and wiring insulation inside operator arms and control boxes faster than coastal conditions do, and the wind loads put constant strain on actuators and safety edges. We troubleshoot the full electrical path: the control board, the keypad, the loop detector, the safety sensors, and the power feed. If your gate won’t respond to a remote or opens halfway and stops, Electric Gate Repair in San Bernardino is the page to read next.

Gate Motor Repair in San Bernardino
The gate motor is the box that slides or swings your gate automatically. In San Bernardino, motors burn out early because wind adds constant resistance, forcing the motor to work against the load on every cycle. We service motors from LiftMaster, Viking, Ghost Controls, DoorKing, Elite, FAAC, BFT, Linear, and Mighty Mule. Whether the motor hums but won’t move, trips its breaker, or has stopped responding entirely, Gate Motor Repair in San Bernardino explains the repair options and cost.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Bernardino
Our technicians are factory-trained on the equipment you’re most likely to find on a San Bernardino driveway. That includes our brands like Viking, Ghost Controls, DoorKing, and Elite, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We stock common boards, arms, and remotes locally in the Inland Empire so most repairs don’t wait on a parts order.
Pricing for Gate Company in San Bernardino, CA
| Service | Typical range in San Bernardino |
|---|---|
| Standard gate repair service call | $75 – $125 |
| Hinge replacement (each) | $85 – $180 |
| Weld repair (per location) | $120 – $300 |
| Post straightening or replacement | $350 – $1,100 |
| Slide gate roller replacement | $150 – $350 |
| Track repair or replacement | $200 – $650 |
| Gate wheel replacement | $90 – $220 |
| Electric gate circuit board replacement | $300 – $650 |
| Remote or keypad programming | $75 – $150 |
| Gate motor replacement | $450 – $1,100 |
| Full gate operator installation | $900 – $2,400 |
| Swing gate operator arm replacement | $350 – $800 |
What pushes a San Bernardino job toward the top of that range is usually structural: a post that’s rusted through at the base from mineral-heavy groundwater, or a slide gate frame that’s been racked by repeated wind events and needs realignment before new parts will hold. You’ll always get the written price before we start, and that price is what you pay.
Neighborhoods We Serve in San Bernardino
We run calls across the whole city, from older tract neighborhoods to newer subdivisions on the north side. Typical response time for the San Bernardino area is same-day for repair calls, and we schedule installations at your convenience.
- Verdemont
- North Park
- Arrowhead
- Del Rosa
- Blair Park
Service Area – Cities Near San Bernardino
San Bernardino sits at the center of our Inland Empire coverage, and we also serve the surrounding communities. If you’re in Loma Linda, CA, Highland, CA, Rialto, CA, or Colton, CA, your gate gets the same tech-by-name-and-photo service and the same written price before work starts. Dispatching is coordinated from our Inland Empire office.
Serving San Bernardino, CA - Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Bernardino
Repair calls in San Bernardino are typically handled same-day. When you call, you’ll speak to a live person who can schedule the visit and send you the technician’s name and photo before arrival. Every technician shows a photo ID badge at the door.
For most repairs, no. Replacing a hinge, a roller, a motor, or a circuit board on an existing gate doesn’t require a permit in San Bernardino. Full new installations or work that changes the footprint may trigger review, and we’ll tell you before any work is scheduled if that applies to your job.
Every repair comes with our 365-Day Done Right Promise in writing. If the repair isn’t right within a year, we return and make it right at no charge. That includes the second visit. Call (828) 426-7081 and we’ll schedule it.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Bernardino Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.





Before
After
Before
After
Before
After