Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Treasure Island, FL
We repair and maintain gates on Treasure Island, a barrier island where salt air attacks metal from two directions at once. Most homes here were built between the 1950s and 1970s, and many still have their original ornamental iron or chain-link gates, now heavily oxidized after decades of exposure to Gulf spray on one side and Boca Ciega Bay air on the other. Gate hardware on Treasure Island fails years earlier than manufacturer ratings predict, which means corrosion-rated materials are not an upsell here, they are the baseline. Call (828) 426-7081 when a gate sticks, sags, or stops responding.
Why Treasure Island Homes Are Different
Treasure Island sits between the Gulf of Mexico and Boca Ciega Bay, so every gate on the island weathers salt-laden air from both directions. We regularly see gate operators and control boards with corrosion levels closer to what you’d find on a marine vessel than on a typical Florida gate. Hinges, frames, and motors that would last 10 to 12 years inland often fail here in half that time, and standard steel hardware can rust through in as little as two or three seasons.
The dominant housing stock is 1950s through 1970s concrete-block beach cottages and duplexes, many still fitted with their original wrought iron or chain-link gates. That hardware is now 50 plus years old and heavily oxidized. A growing number of elevated post-storm rebuilds, particularly after the 2004 and 2005 hurricane seasons, add automated driveway and pool gates that sit at grade level and face periodic tidal flooding and storm surge. Low-lying properties in Treasure Island’s FEMA AE flood zones can lose a gate motor outright in a single storm event. And Florida’s pool barrier law adds another layer: every pool gate must self-close and self-latch, and on Treasure Island those gates are hit with chlorine splash from the pool on one side and Gulf salt air on the other. We almost always spec marine-grade stainless or powder-coated aluminum pool gate hardware here, because standard steel simply doesn’t hold up.
Our Main Treasure Island Services
These are the three gate jobs Treasure Island homeowners call us about most, each with its own dedicated page covering local pricing and what the work involves on a barrier island.
Gate Repair in Treasure Island
Most Treasure Island gate repairs start with a sag off its hinges or a latch that no longer catches. On this island, the culprit is almost always salt-driven corrosion in the hinge pins, weld points, or latching hardware. We cut out the rusted sections, weld in new material where the frame allows, and replace hardware with marine-grade stainless or powder-coated aluminum so the repair holds longer than the original. Operators and control boards also take a beating from constant salt fog. Gate Repair in Treasure Island covers the full scope and local pricing.

Electric Gate Repair in Treasure Island
Electric gates on Treasure Island live in an environment that is actively hostile to electronics. Solenoids, limit switches, and control boards are exposed to salt-fog levels that accelerate corrosion and cause intermittent failures long before the motor itself gives out. We trace the circuit, identify whether the fault is in the board, the wiring, or the operator, and replace only what has failed. Salt-resistant enclosures and sealed connections matter here more than anywhere inland. Electric Gate Repair in Treasure Island details the diagnosis process and typical costs.

Gate Motor Repair in Treasure Island
The gate motor, the box that slides or swings your gate automatically, works harder on Treasure Island than on the mainland. Salt corrosion attacks the motor housing and internal components, and storm surge in low-lying flood zones can immerse a motor completely in a single event. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule motors, and we stock the most common replacement parts for these brands locally so most motor repairs are completed in a single visit. Gate Motor Repair in Treasure Island explains what a motor rebuild versus a replacement looks like and what each costs.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Treasure Island
We carry factory-fresh replacement parts for Linear, Viking, Ghost Controls, and DoorKing gates and openers, and our techs are factory-trained on all nine brands we service. Most common parts are stocked locally in South Florida, which keeps turnaround tight for Treasure Island customers. Our brands page lists the full lineup.
Pricing for Gate Company in Treasure Island, FL
| Service | Typical range in Treasure Island |
|---|---|
| Hinge replacement (standard steel) | $95 – $160 |
| Hinge replacement (marine-grade stainless) | $160 – $280 |
| Weld repair (cracked or rusted frame section) | $120 – $240 |
| Pool gate self-closing/latching hardware | $140 – $260 |
| Gate opener/control board replacement | $260 – $520 |
| Gate motor removal and swap | $340 – $680 |
| Full gate replacement (single swing, standard) | $1,400 – $3,600 |
| Full gate replacement (single slide, with operator) | $2,800 – $6,500 |
On Treasure Island, the two things that push a job toward the top of these ranges are corrosion and access. If salt has eaten through a frame section or an operator housing, the repair takes longer and costs more than the same job on the mainland, because the replacement part must be corrosion-rated. Every price we quote is written down and agreed before any work starts, so there are no surprise line items on the invoice.
Neighborhoods We Serve in Treasure Island
We cover the entire island, from the northern tip near John’s Pass down through the residential streets around Paradise Island and the downtown core near 107th Avenue. Response time is typically same-day or next-day for most repair calls, depending on the time of year.
- Isle of Palms
- Paradise Island
- Sunset Beach
- North Treasure Island
- Downtown Treasure Island
Service Area – Cities Near Treasure Island
Our Treasure Island crews handle the island itself and coordinate with our wider network across Florida, including Jacksonville, FL, Miami, FL, Tampa, FL, and Orlando, FL. Dispatch and scheduling are coordinated from our South Florida office, but the technician who arrives at your Treasure Island gate is local to the area and familiar with its coastal conditions.
Serving Treasure Island, FL - Our Local Coverage Area
We’re based in the Treasure Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Treasure Island
Most Treasure Island repair calls are handled same-day or next-day. Storm surge events in low-lying FEMA AE zones can create a backlog, so during hurricane season we recommend calling as soon as you notice a problem rather than waiting. Our phone line is answered by a live person 24/7, so you’ll always reach someone who can schedule you.
Most straightforward gate repairs and hardware swaps do not require a permit. Full gate replacements, particularly for driveway gates that interact with the public right-of-way or automated gates with new electrical runs, often do. We can walk you through what the city requires for your specific property before any work begins.
It will if you use standard steel hardware. On Treasure Island, we spec marine-grade stainless or powder-coated aluminum for hinges, latches, and exposed frame sections, because standard steel cannot withstand the dual salt exposure from the Gulf and Boca Ciega Bay. The right materials add a modest amount to the upfront price but typically double the life of the repair or replacement.
Yes. The elevated post-storm homes common on Treasure Island often have automated driveway and pool gates at grade level, which means the gate and motor sit exactly where tidal flooding and storm surge hit. We handle both the automation and the corrosion-proofing for these properties, including sealed enclosures and raised mounting where practical.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Treasure Island Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.





Before
After
Before
After
Before
After