Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Union Park, FL
Warden Gate Repair is the gate company Union Park homeowners call when a driveway gate stops opening, a motor hums without moving, or an iron gate no longer closes square. Most of the work we do here involves gates installed between the 1970s and 1990s, which means we’re usually repairing or retrofitting equipment that has already outlived its original design life. Central Florida humidity, summer lightning, and shifting sandy soil all shorten that life faster than owners expect. If your gate isn’t working right, call us at (828) 426-7081. We answer live, and we’ll give you a written price before any work begins.
Why Union Park Homes Are Different
Union Park is unincorporated Orange County, mostly built out between the 1970s and 1990s as tract and semi-custom suburban homes on modest lots. A large share of the original driveway gates from that era are ornamental iron or early aluminum. Those gates are now 30 to 50 years old. In Central Florida’s heat and humidity, iron gates from that period have usually been through several repaint cycles, and many are now rusting from the inside out at the bottom rail and hinge welds. The posts holding them are often set in sandy fill soil that has shifted over the decades, so a gate that once swung cleanly now drags or binds against the latch post.
Summer afternoons in Union Park bring intense thunderstorm activity from June through September. Nearby lightning strikes routinely fry control boards and loop detectors on automatic gate operators. That’s the single most common emergency call we get from this area: a storm rolls through, the power flickers, and the gate won’t respond. Because Union Park sits in unincorporated Orange County, gate and fence permits run through the Orange County Building Division rather than the City of Orlando. The setback and height rules differ from what applies inside city limits. We regularly find older gates that were installed without a permit or under rules that have since changed. What starts as “replace the opener” can turn into a code-compliance conversation. We walk homeowners through that plainly, with the permit path laid out in writing.
Our Main Union Park Services
These are the three services Union Park homeowners call us about most, each with its own dedicated page covering the work in detail.
Gate Repair in Union Park
Weld breaks, sagging hinges, rusted bottom rails, posts pulling out of sandy soil. Most Union Park gate repairs are structural before they’re electrical – the gate itself has to be square and sound before any automation can work reliably. We repair broken pickets, re-weld hinges where the metal allows, and realign gates that have shifted on their posts. When the damage is too far gone, we tell you that straight, with a replacement price on paper. See the full breakdown at Gate Repair in Union Park.
Electric Gate Repair in Union Park
Electric gate problems in Union Park usually trace back to one of three things: a lightning-damaged control board, a failed loop detector, or wiring that has degraded after decades of heat exposure. We diagnose the circuit, replace boards and safety edges, and re-splice corroded connections. Every electrical repair gets a written price before we touch a wire. Full details are on the Electric Gate Repair in Union Park page.
Gate Motor Repair in Union Park
The gate motor (the box that slides or swings your gate automatically) works hard in Union Park’s climate. Capacitors fail, gears strip, and limit switches drift. On a 30-year-old operator, the honest answer is sometimes a retrofit rather than a repair – and we’ll show you both prices so you decide with real numbers in front of you. Learn what’s involved at Gate Motor Repair in Union Park.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Union Park
We’re factory-trained on the equipment most common in Union Park, including LiftMaster, Viking, Ghost Controls, and Linear operators. We carry the control boards, remotes, and safety parts for these brands on our local trucks, so many repairs finish on the first visit. For the full list of what we service, see our brands.
Pricing for Gate Company in Union Park, FL
These are the typical ranges we quote in Union Park. Your written price depends on your gate’s size, condition, and what we find on site, but these numbers give you an honest starting point before you call.
| Service | Typical range in Union Park |
|---|---|
| Diagnostic service call | $75 – $125 |
| Gate realignment | $150 – $300 |
| Hinge repair (weld or replacement) | $150 – $350 |
| Control board replacement | $250 – $500 |
| Loop detector replacement | $200 – $400 |
| Gate motor replacement (operator) | $800 – $2,200 |
| Safety edge or photobeam repair | $150 – $350 |
| Full iron gate replacement (single driveway) | $2,000 – $5,500 |
| Post reset or replacement | $350 – $800 |
| Wiring repair (underground or conduit) | $200 – $600 |
What pushes a Union Park price up is usually age: a 40-year-old iron gate with rusted posts and a corroded operator needs more labor than a 10-year-old aluminum gate with a simple board swap. Whatever the job, your written price is agreed before we start. No surprise line items at the end, and the 365-Day Done Right Promise backs every repair in writing.
Neighborhoods We Serve in Union Park
We work throughout Union Park and the surrounding unincorporated Orange County area, including these neighborhoods:
- Union Park Estates
- Azalea Park
- Goldenrod
- College Park North
- Rio Pinar
Most Union Park calls can be scheduled within a day or two. Emergency storm-damage calls are prioritized, and we dispatch as quickly as weather allows.
Service Area – Cities Near Union Park
Beyond Union Park, our crews serve nearby cities across Central Florida. If your gate is in Orlando, FL, Tampa, FL, Jacksonville, FL, or Miami, FL, the same written-price promise and Threshold Standard apply. Scheduling is coordinated from our South Florida office; the technician who arrives at your gate is local to your area.
Serving Union Park, FL - Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Union Park
Most non-emergency calls are scheduled within one to two business days. Storm-related failures, a gate stuck open, or a gate that won’t secure get priority dispatch. Call (828) 426-7081 and we’ll give you a straight answer on timing.
Possibly. Union Park is unincorporated Orange County, so permit rules come through the Orange County Building Division, not the City of Orlando. If your job triggers a permit requirement, we’ll explain exactly what’s needed and the path to compliance. Older unpermitted gates are common here, and we handle those conversations without judgment.
Yes. Every Warden technician is background-checked, identity-verified, and photo-badged. We send you the technician’s name and photo before the visit, and they show their badge at the door. That’s the Threshold Standard, enforced on every call. Call (828) 426-7081 for a free estimate on gate work in Union Park. Cole Rafferty and our team are ready to help.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Union Park Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.