Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Wauna, WA
Wauna sits along Carr Inlet and Henderson Bay on the Key Peninsula, where salt-heavy marine air settles into every hinge, latch, and gate motor in sight. That single fact changes how gate repair works here compared to inland communities just a few miles east. Whether you need Gate Repair in Wauna, electric gate work, or a gate motor diagnosed, the job almost always starts with corrosion control before any mechanical fix will hold. Call (828) 426-7081 and we’ll send a named, photo-badged technician with a written price before anything gets touched.
Why Wauna Homes Are Different
Wauna is rural and semi-rural at its core: long gravel or paved private driveways, acreage, and mid-century waterfront cabins converted to year-round homes. A gated entry is standard here, not an upgrade. Many of those gates are swing or sliding models installed decades ago, back when the Key Peninsula was mostly seasonal retreats. The hardware on those older gates predates modern corrosion-resistant coatings, and the marine air off Carr Inlet has had years to work on every steel component.
We also see a lot of hand-built wooden gates from the 1950s through ’70s, especially on waterfront lots that started as cabins. Their posts were often set directly into clay-heavy soil without concrete footings. Years of rain and ground movement have shifted those posts, leaving gates that sag, scrape, and no longer latch. Fixing that in Wauna means re-plumbing the post before any hinge or latch repair makes sense. The wet season, roughly October through April, brings persistent condensation inside control boxes, which is when most automatic gate failures actually happen here.
Our Main Wauna Services
Most Wauna calls fall into two buckets: a gate that no longer opens and closes cleanly, or a gate motor that has stopped responding entirely. Each service has its own Wauna page, below.
Gate Repair in Wauna
Gate repair in Wauna usually means rusted hinges, warped wooden posts, or a latch that no longer catches. On waterfront properties, steel components corrode years faster than they would in Gig Harbor proper, so we inspect for salt damage even when the visible problem looks simple. We re-hang gates, replace corroded hardware, re-plumb posts where the soil has shifted, and leave the gate swinging true. Written price before we start, every time. Read the full breakdown: Gate Repair in Wauna.
Electric Gate Repair in Wauna
Electric gate repair on the Key Peninsula often traces back to moisture inside the control box or corroded wiring connections near the gate. Persistent humidity and steady rain make electrical failures a fall and winter constant. We test sensors, photo eyes, safety loops, and the full power path, then replace what is actually failed rather than guessing. No anonymous technician, no open-ended invoice. Details on what we diagnose: Electric Gate Repair in Wauna.
Gate Motor Repair in Wauna
Gate motor repair (the box that slides or swings your gate automatically) in Wauna frequently involves condensation inside the unit and worn gears from gates that were misaligned long before the motor gave out. We rebuild or replace motors, reset travel limits, and confirm the gate moves smoothly without straining the new parts. Every motor job gets the same written price and the same 365-Day Done Right Promise. See the full scope: Gate Motor Repair in Wauna.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Wauna
We carry factory service training and current parts stock for FAAC, BFT, Linear, and Viking gates and openers, which together cover a large share of the equipment installed across Wauna and the Key Peninsula. That means no multi-week part waits on most jobs. See the complete list on our brands page.
Pricing for Gate Company in Wauna, WA
| Service | Typical range in Wauna |
|---|---|
| Gate opener installation | $1,400 – $2,800 |
| Gate motor replacement | $900 – $1,900 |
| Automatic gate opener repair | $250 – $650 |
| Gate hinge replacement | $150 – $450 |
| Gate sensor replacement | $175 – $425 |
| Gate frame repair | $350 – $1,200 |
| Gate wheel and truck replacement | $200 – $600 |
| Gate opener safety sensor repair | $175 – $425 |
| Gate motor capacitor replacement | $150 – $350 |
| Gate opener gear and sprocket replacement | $275 – $675 |
Marine corrosion and post movement push Wauna prices toward the upper end of these ranges more often than inland jobs, simply because the prep work takes longer. Whatever the number is, you get it in writing before any work starts. No line items added at the end.
Neighborhoods We Serve in Wauna
We work across the full Wauna area, from waterfront properties along Carr Inlet and Henderson Bay up through the inland acreage and private-drive lots that make up the rest of the community. Response time in this part of the Key Peninsula is typically same-day for urgent gate failures.
- Waterfront homes along Carr Inlet
- Properties near Henderson Bay
- Inland acreage and private-drive lots
- Converted mid-century cabin properties
- Newer custom builds on larger lots
Service Area – Cities Near Wauna
Beyond Wauna, our crews cover the surrounding South Sound communities. You will find us in Gig Harbor, WA, across the water in Vashon, WA, down through Port Orchard, WA, and north to University Place, WA. Dispatch and scheduling run through our Seattle office, with crews based locally for Wauna work.
Serving Wauna, WA - Our Local Coverage Area
We’re based in the Wauna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Wauna
We can usually reach Wauna the same day for a gate that won’t open or close, especially when the failure leaves your driveway blocked or unsecured. Call (828) 426-7081 and a live person answers 24/7, not a chatbot or voicemail. We’ll confirm a specific arrival window and send the technician’s name and photo before they head your way.
Most gate repairs in Wauna do not require a permit, since we are restoring existing hardware rather than building new structures. Where a full gate replacement involves new posts or concrete work, your specific lot and any Pierce County requirements would determine the paperwork. We’ll tell you exactly what applies before work begins.
The written price covers the full repair scope we agree on before any work starts: parts, labor, and cleanup. If we open the gate and find something else that needs attention, you approve the changed number first. No surprises at the end. Every Wauna job also carries the 365-Day Done Right Promise in writing. Call (828) 426-7081 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wauna Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.