Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Whitney, NV
Gate repair in Whitney means working on 1960s to 1980s wrought iron and tubular steel gates that have spent decades in Mojave Desert heat and hard water. The older tract homes here, many with side-yard RV gates, develop hinge sag, post-footing cracks, and thermal binding that newer neighborhoods simply don’t see. Warden Gate Repair handles all of it, from a sagging swing gate to a dead gate motor. Call (828) 426-7081 and a real person answers, day or night.
Why Whitney Homes Are Different
Whitney is unincorporated Clark County, not Las Vegas or Henderson. That matters when a gate post needs replacing or a new gate gets installed, because permits run through Clark County’s separate approval process. Contractors who mostly work inside city limits sometimes miss that. We don’t.
The housing stock tells the rest of the story. Most Whitney homes went up between the 1960s and 1980s, and the gates matched the era: wrought iron and tubular steel, often installed directly against block walls with no expansion gap. Summer heat past 110°F makes that steel grow enough to pinch the gate shut against the post. We regularly cut a proper clearance gap and realign the hinge leaf so the gate swings freely again. It’s practically a signature repair in this pocket of the valley.
Then there’s the water. Las Vegas Valley water runs over 300 ppm hardness, and decades of sprinkler overspray leave hinges and frames mineral-crusted. Combine that with caliche hardpan under the post footings, and you get cracked concrete bases and gates that sag and drag. Whitney gates have lived a hard life. We fix what that life did to them.
Our Main Whitney Services
Whitney homeowners call us most often for two things: a gate that won’t stay aligned or latched, and an electric opener that quit. Each service has its own Whitney page with full detail.
Gate Repair in Whitney
Wrought iron and tubular steel gates in Whitney fail in predictable ways: post footings crack in the caliche, hinges corrode from sprinkler hard water, and summer heat binds the frame against block walls. We repair the gate in place when practical, replace hinge and latch hardware when it isn’t, and cut expansion clearance so the gate doesn’t pinch shut in August. Every job includes a written price before work starts. See the full scope on our Gate Repair in Whitney page.
Electric Gate Repair in Whitney
Dust from seasonal haboobs works its way into limit switches, safety loops, and control boards on Whitney’s automatic gates. When an electric gate stops mid-cycle or won’t respond to the remote, we test the operator, wiring, and safety edges before replacing anything unnecessary. We service FAAC, BFT, Linear, Viking, and more. Details and typical troubleshooting are on the Electric Gate Repair in Whitney page.
Gate Motor Repair in Whitney
The gate motor, the box that slides or swings your gate automatically, takes a beating in Whitney’s dust and heat. Grit gets into drive gears, thermal overloads trip in summer, and capacitor failures stop swing arms cold. We diagnose the motor itself, replace what’s failed, and advise honestly if a new operator makes more sense than nursing an old one. The full sub-job list and prices are on our Gate Motor Repair in Whitney page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Whitney
We’re factory-trained on FAAC, BFT, Linear, and Viking swing and slide operators, and we stock the most common Whitney parts locally: swing arm capacitors, limit switches, control board relays, and safety loop components. That means no week-long wait for a part when your gate is stuck. See everything we service on our brands page.
Pricing for Gate Company in Whitney, NV
| Service | Typical range in Whitney |
|---|---|
| Service call and diagnosis | $49 – $99 |
| Gate hinge replacement (pair) | $120 – $260 |
| Post footing repair (single post) | $350 – $750 |
| Wrought iron crack welding | $80 – $180 per crack |
| Gate realignment (sagging swing gate) | $150 – $300 |
| Latch or lock replacement | $75 – $190 |
| Gate opener capacitor replacement | $120 – $220 |
| Control board replacement | $250 – $600 |
| Limit switch replacement | $110 – $220 |
| Safety sensor / photo eye replacement | $110 – $210 |
| Full gate motor replacement | $450 – $1,900 |
| Annual tune-up and lubrication | $99 – $180 |
What pushes Whitney prices toward the top of these ranges is usually access: older gates set tight against block walls or posts sunk into caliche take longer to work on safely. What never changes is the price itself once we quote it. You get a written price before any work starts, and it doesn’t move.
Neighborhoods We Serve in Whitney
We cover all of Whitney, from the older tract streets around the Whitney Community Center to the RV-gate-heavy blocks near Boulder Highway and down toward the Henderson line. We’re in Whitney most days, so we can usually be on site the same day or next morning.
- Whitney Ranch area
- Streets surrounding Sam Boyd Stadium
- Boulder Highway corridor
- Blocks bordering Henderson near Sunset Road
- Whitney Community Center vicinity
Service Area – Cities Near Whitney
Most of our Whitney work stays local, but our crews also serve the surrounding valley. If you’re just outside Whitney, we cover Las Vegas, NV, Henderson, NV, North Las Vegas, NV, and Enterprise, NV as well. Dispatch and scheduling are coordinated from the Las Vegas office, with crews serving Whitney locally.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Whitney
Usually same day or next morning. We keep Whitney on a regular route, so a technician is rarely more than 20 minutes out when the call comes in. If your gate is stuck open or won’t shut, we treat that as priority, because an open gate in Whitney is a real security problem. Call (828) 426-7081 and we’ll give you a straight arrival window.
Most repairs, like hinge replacement, welding, or a new gate motor, do not need a permit. Full gate replacement or new post footings can trigger a Clark County permit requirement, since Whitney is unincorporated county land. We’ll tell you honestly on the first visit whether your job needs one, and we handle the filing if it does.
Yes. Most of what we see in Whitney is original 1970s-era wrought iron and tubular steel, and that’s our home ground. We repair in place whenever the structure is sound, and we’ll only recommend replacement when the post or frame is too compromised to hold a weld or a hinge safely. You get a written price before any work starts, every time.
Contact Warden Gate Repair in Whitney, NV
If your Whitney gate is sagging, stuck, binding in the heat, or the motor just won’t run, call (828) 426-7081. A live person answers 24/7, we’ll ask what’s going on, and we’ll give you a free estimate before any work begins. You’ll know exactly who is coming to your door, and exactly what it will cost.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Whitney Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.