Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Richland Hills, TX
Warden Gate Repair is the gate company Richland Hills homeowners call when a gate stops closing true, a post leans out of plumb, or a gate motor quits after a storm. Most of the city’s 1950s – 1970s ranch homes still carry their original chain-link or wood privacy gates, set into the same Blackland Prairie clay that has been shifting under Richland Hills for decades. That clay is the reason so many local gates bind at the latch, drag at the hinge, and crack welds season after season. We quote a written price before any work starts and send a named, photo-badged technician to your door. Call (828) 426-7081 for a free estimate.
Why Richland Hills Homes Are Different
Richland Hills is one of the smallest incorporated cities in Tarrant County, roughly 2.8 square miles of post-WWII ranch homes built predominantly in the 1950s through the 1970s. That concentration of same-era construction means we see a very consistent pattern: brick ranch houses on modest lots, many still fitted with original or first-replacement chain-link and wood privacy gates on aging steel posts. The posts were typically set three feet or less into expansive clay, which was never enough for this soil.
North Texas sits on Blackland Prairie clay, and Richland Hills feels every cycle of it. Extended summer heat above 100°F dries the soil and contracts it. Winter rains re-expand it. The result is hundreds of wet-dry cycles that physically push gate posts out of plumb season after season. We regularly find gates in Richland Hills that dragged for years before the owner realized the post had moved, because the brick ranch house next to it was built in the same era and settled the same way, and everyone had just gotten used to it. Severe spring thunderstorms, plus freeze events like the 2021 Winter Storm Uri, accelerate wood rot and snap weakened hinges on gates already stressed by soil movement. This is the defining repair pattern in Richland Hills: chronic post lean and hinge misalignment, in a way the newer master-planned suburbs around the Metroplex simply don’t share.
Our Main Richland Hills Services
Most Richland Hills calls to us fall into one of three categories, each with its own dedicated page below.
Gate Repair in Richland Hills
Gate repair in Richland Hills usually means correcting what the clay has done to a decades-old gate. A post that has heaved or tilted pulls the gate off its hinges, which then wears the latch, the hinges, and eventually the frame itself. We reset or brace posts, rehang the gate leaf, replace worn hinges and latches, and bring the swing back to level. Because so many Richland Hills properties still run their original chain-link or wood privacy gates, parts are predictable and we carry the common hardware for this era of home. Full details are on the dedicated page, Gate Repair in Richland Hills.
Electric Gate Repair in Richland Hills
Electric gate repair in Richland Hills often comes down to safety edges, photo eyes, and the wiring run between the house and the gate, all of which suffer in North Texas heat and storm cycles. A gate that has shifted on its posts will throw off the limit settings and make the opener work harder than it should. We diagnose the full system, from the keypad and remote receiver to the arm or slide mechanism, and give you a written price before any work begins. Full details are on the dedicated page, Electric Gate Repair in Richland Hills.
Gate Motor Repair in Richland Hills
Gate motor repair in Richland Hills is what we do when the box that slides or swings your gate automatically stops doing its job. Heat exposure on a west-facing brick wall, power surges from spring storms, and years of strain against a slightly binding gate all take their toll. We work on gate motors from FAAC, BFT, Linear, Viking, and other major brands, with repair or replacement options quoted upfront. Full details are on the dedicated page, Gate Motor Repair in Richland Hills.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Richland Hills
We service and stock parts for the gate and opener brands Richland Hills homes actually use, including FAAC, BFT, Linear, and Viking. Because we work only on gates and openers, we keep the right boards, arms, and hardware moving through our Dallas-Fort Worth stock so turnaround on common repairs stays quick. See our brands for the full list.
Pricing for Gate Company in Richland Hills, TX
| Service | Typical range in Richland Hills |
|---|---|
| Gate post reset or brace (single post) | $180 – $340 |
| Hinge replacement (pair) | $95 – $210 |
| Latch or lock replacement | $85 – $190 |
| Chain-link gate rehang and tension | $120 – $260 |
| Wood privacy gate realignment | $140 – $300 |
| Gate motor diagnosis | $75 – $150 |
| Gate motor repair (board, arm, or gear) | $220 – $480 |
| Gate opener replacement (standard swing) | $650 – $1,100 |
| Safety edge or photo eye replacement | $120 – $260 |
In Richland Hills, prices push toward the upper end of these ranges when a post has to be dug out and re-set in expansive clay, when rot has spread into the gate frame itself, or when a freeze event has snapped hardware that was already stressed by soil movement. The price we quote before work starts is the price you pay, written down, with no surprise line items at the end. Every repair also carries the 365-Day Done Right Promise: if it fails within a year, the return visit is free.
Neighborhoods We Serve in Richland Hills
Richland Hills is compact, and we cover all of it. Most of the city’s residential streets are a short drive from our Dallas-Fort Worth dispatch point, and we typically reach Richland Hills homes the same day for urgent repairs.
- Richland Hills East
- The area around Richland Park
- Baker Boulevard corridor
- Glenview Drive area
- Rufe Snow Drive corridor
Service Area – Cities Near Richland Hills
Warden Gate Repair serves Richland Hills and the surrounding Tarrant County cities from our Dallas-Fort Worth office. We also work in Dallas, TX, Fort Worth, TX, and Houston, TX for larger projects, and we cover San Antonio, FL for Florida clients. If your home sits just outside Richland Hills, call us and we’ll confirm coverage.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richland Hills
Richland Hills has its own standalone municipal code, even though the city is completely surrounded by Fort Worth, Haltom City, North Richland Hills, and Hurst. Fence and gate work often requires a Richland Hills permit, and a technician familiar with the city’s code can help you anticipate that upfront rather than discovering it mid-project. Call us for guidance on your specific project.
For urgent gate failures, we typically reach Richland Hills the same day from our Dallas-Fort Worth dispatch point. Emergency calls are answered by a live person 24/7, and we can give you a realistic arrival window when you call (828) 426-7081.
Yes. Every Warden technician is background-checked, identity-verified, and photo-badged under our Threshold Standard. Before any visit, we send you the technician’s name and photo so you know exactly who is coming to your Richland Hills home before they arrive.
Call (828) 426-7081 for a free estimate on gate work in Richland Hills. A live person answers, and you’ll have a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richland Hills Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.