Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fort Worth, TX
Gate work in Fort Worth has a rhythm all its own. The Blackland Prairie clay under most of the city swells and shrinks through the seasons, and that movement slowly pushes gate posts out of plumb. Add in ice storms that seize motors and a housing stock that runs from 1950s ranch homes to sprawling Alliance-corridor subdivisions, and you get repair calls that look different here than anywhere else in the metro. Warden Gate Repair handles all of it, from ornamental iron driveway gates to welded-pipe ranch gates. Call (828) 426-7081 and you’ll get a live person, not a recording.
Why Fort Worth Homes Are Different
Most of Fort Worth sits on expansive clay that holds moisture through spring rains, then bakes hard during Tarrant County’s long summer droughts. That cycle physically tilts gate posts and racks gate frames out of square, often within a few years of installation. We regularly see gates in Wedgwood and Ridglea that worked fine for a decade before the soil finally won.
The housing stock compounds it. Inner-ring neighborhoods like Wedgwood, Ridglea, and parts of Haltom City hold thousands of 1950s-to-70s brick ranch homes with aging ornamental iron gates – corroded hinges, tired swing operators, pickets rusted at the base. Up north along the Alliance corridor, HOA-managed automated sliding gates are standard, and those boards expect repairs done fast and documented. West of Loop 820, toward Benbrook and Lake Worth, the call changes again: welded-pipe ranch gates on horse properties need heavier hardware and a different repair approach entirely. In unincorporated pockets near Sansom Park and Azle Road, it’s routine for a single service call to include both a decorative iron driveway gate and a cattle panel gate on the side fence line. This page doesn’t break those services out – each has its own Fort Worth page linked below.
Our Main Fort Worth Services
The two calls we take most often in Fort Worth are gates that won’t close and openers that stopped responding, but the repair usually comes down to one of three jobs.
Gate Repair in Fort Worth
This is the most common call in the city, and Fort Worth’s clay soil is usually the root cause. A gate that dragged last month is now sitting on the ground, or a post has leaned enough that the latch won’t catch. We reset posts in concrete, realign the gate frame, replace corroded hinges, and get it swinging or sliding true again. On older ranch homes in Ridglea and Wedgwood, hinge corrosion from decades of Texas heat and humidity is often the first thing to fail. Full details are on the Gate Repair in Fort Worth page.
Electric Gate Repair in Fort Worth
Automated gates in Fort Worth face two local enemies: the clay that shifts posts and the ice storms that hit Tarrant County harder than points east. When a post moves even half an inch, the opener has to work against it until the motor burns out or a gear strips. We diagnose the opener’s control board, safety sensors, and wiring, and we fix the alignment problem that caused the strain in the first place. When ice shears through the system, the full breakdown is on the Electric Gate Repair in Fort Worth page.
Gate Motor Repair in Fort Worth
For Fort Worth homes that already have a good gate, the motor is typically the next failure point – and our freeze-thaw cycles accelerate it. Ice buildup seizes swing-operator motors and cracks plastic gear housings; summer heat pushes circuit boards past their limits. We service motors from FAAC, BFT, Linear, and Viking, among others, and we carry common parts on the truck so one visit usually finishes the job. The complete scope is on the Gate Motor Repair in Fort Worth page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fort Worth
We’re factory-trained on nine major gate and opener brands, and in Fort Worth we most often work on FAAC, BFT, Linear, and Viking equipment. Common motors, control boards, and safety components for these brands are stocked locally so most repairs happen in a single visit. See our brands for the full list.
Pricing for Gate Company in Fort Worth, TX
| Service | Typical range in Fort Worth |
|---|---|
| Gate repair (general) | $145 – $620 |
| Electric gate repair | $180 – $780 |
| Gate motor repair | $165 – $725 |
| Diagnostic visit (credited to repair) | $49 – $89 |
| Hinge replacement | $95 – $380 |
| Weld repair | $125 – $450 |
| Post reset and realignment | $195 – $640 |
| Opener adjustment or limit switch repair | $125 – $325 |
| Motor replacement | $380 – $1,000+ |
| Control board replacement | $180 – $520 |
Fort Worth’s clay soil pushes repair costs up when posts have to be reset and the frame realigned, not just patched. Ice damage compounds it: a frozen motor often means replacing the gear housing, not just the board. Whatever the job, you get a written price before any work starts, every time, with no surprise line items added at the end.
Neighborhoods We Serve in Fort Worth
We cover all of Fort Worth and the surrounding Tarrant County area, with technicians dispatched locally from our Dallas-Fort Worth office.
- Wedgwood
- Ridglea
- Alliance corridor
- Benbrook
- Lake Worth
Most Fort Worth calls are answered same day or next morning, and live phone coverage is available around the clock.
Service Area – Cities Near Fort Worth
Our Fort Worth service area extends into the neighboring Tarrant County communities, including Haltom City, TX, North Richland Hills, TX, Hurst, TX, and Kennedale, TX. If you’re on the edge of the metro, call and we’ll confirm coverage.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fort Worth
Most Fort Worth calls are answered same day, and many repairs are completed on the first visit because our trucks carry common FAAC, BFT, Linear, and Viking parts. For urgent safety issues where a gate won’t close or secure, we prioritize those calls. Call (828) 426-7081 and a live person will give you a straight answer.
In HOA-managed communities, especially along the Alliance corridor, exterior gate changes often need approval even when it’s a like-for-like repair. Repairs that match the existing gate and opener typically don’t. We can tell you what your board will likely ask for, and we document the work clearly for your records.
Most jobs land between $145 and $780, depending on whether it’s a hinge, a post, or a motor. The clay soil under Fort Worth means post resets and realignments are more common here than in surrounding cities, which can push a repair toward the higher end of that range. You’ll get a written quote before any work begins. Call (828) 426-7081 for an exact figure.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.