Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kennedale, TX
Gate repair in Kennedale comes with a set of conditions you won’t find in most DFW suburbs. The long-driveway entrance gates on acreage properties, the heavy welded-pipe ranch gates built decades before automatic openers existed, and the Blackland Prairie clay that moves posts every wet season all change how a gate job should be approached. We work on Kennedale gates with that reality in mind: the soil, the heat, the gate weight, and the retrofit mismatches that keep older properties on a short callback cycle. If your gate won’t open or close properly, call (828) 426-7081 and we’ll send a technician with a name and a face you’ll know before they arrive.
Why Kennedale Homes Are Different
Kennedale is one of the last semi-rural enclaves fully enclosed by the DFW Metroplex. That matters for gate work because the housing stock runs from mid-20th-century homesteads and manufactured homes on large lots to newer 2000s and 2010s subdivision homes. A technician working Kennedale sees everything from heavy welded-pipe ranch gates hung for livestock to ornamental iron driveway gates with modern automatic openers.
The soil is the bigger story. Expansive clay underlies much of southeast Tarrant County, and it shrinks and cracks during North Texas summer drought, then swells dramatically with fall and spring rains. That repeated cycle shifts gate posts laterally and vertically, throwing automatic gates off their limit switches and sensor alignments on a near-annual basis. Summer heat also warps and delaminates wood gate components faster than in more humid climates. A gate that worked fine in April may bind against its post by July, then sit out of plumb by October. Kennedale’s clay makes alignment a recurring maintenance item, not a one-time fix.
The third Kennedale pattern is the retrofit. Older acreage properties with heavy steel-pipe gates originally hung for livestock are increasingly being fitted with residential automatic openers. The gate weight, hinge placement, and post diameter were never designed for automation, which leads to chronic motor strain, stripped gears, and hinge failures. Those repairs need a technician who recognizes the mismatch instead of just replacing the same part again.
Our Main Kennedale Services
Kennedale homeowners call us most often for two situations: a gate that has stopped latching or swinging properly, and a gate motor that runs but won’t move the gate. Each service has its own Kennedale page below.
Gate Repair in Kennedale
Gate repair on a Kennedale acreage property often starts with post alignment. The clay soil has shifted the post enough that the gate drags on the ground or no longer meets the latch. We correct the alignment, rebuild or replace hinges that have been carrying more weight than they were designed for, and check the gate’s swing path for obstacles that have developed as the ground moved. Heavy welded-pipe ranch gates need a different hinge and post strategy than ornamental iron driveway gates, and we approach each accordingly. Full details on our Gate Repair in Kennedale page.
Electric Gate Repair in Kennedale
Electric gate systems in Kennedale suffer from the same soil movement as the gates themselves. A sensor that drifts out of alignment or a limit switch that no longer registers the gate’s true position is often the result of a post shifting half an inch during a wet spell. We diagnose the full circuit, from the control board to the safety edges and photo eyes, and repair what has actually failed rather than replacing parts on a guess. Older retrofitted systems on ranch gates are a specialty. See our Electric Gate Repair in Kennedale page for specifics.
Gate Motor Repair in Kennedale
Gate motor (the box that slides or swings your gate automatically) failures in Kennedale often trace back to weight. A motor sized for a light ornamental gate gets installed on a heavy steel-pipe ranch gate during a retrofit, and the strain strips gears and burns out capacitors within a season or two. We assess the true gate weight and post condition before recommending a motor repair or replacement, because fixing the motor without addressing the load just sets up the next failure. Details on our Gate Motor Repair in Kennedale page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kennedale
We carry service parts for FAAC, BFT, and Linear gate motors on most Kennedale calls, and we’re factory-trained on Viking operators as well. That training matters on acreage retrofits where the motor model and the gate weight don’t match on paper. See our brands for the full list of equipment we service.
Pricing for Gate Company in Kennedale, TX
| Service | Typical range in Kennedale |
|---|---|
| Gate post alignment (clay soil shift) | $180 – $420 |
| Hinge replacement (heavy ranch gate) | $140 – $320 |
| Gate latch or lock repair | $110 – $260 |
| Sensor or photo eye realignment | $95 – $210 |
| Limit switch adjustment or replacement | $120 – $280 |
| Control board repair | $180 – $450 |
| Gate motor gear or capacitor replacement | $160 – $380 |
| Welded-pipe gate frame straightening | $200 – $500 |
| Full gate motor replacement (retrofit) | $550 – $1,200 |
Prices in Kennedale push higher than the suburban average when a gate is heavily out of plumb from clay movement, or when the gate weight far exceeds what the installed motor was rated for. One thing stays constant: the price is written and agreed before any work starts. No line-item surprises at the end.
Neighborhoods We Serve in Kennedale
We cover all of Kennedale, from the acreage properties south of Kennedale Parkway to the newer subdivisions off Mansfield Cardinal Road and the mixed lot sizes along Sublett Road. Most Kennedale calls are reached within the hour because we keep local crews routed through the DFW area rather than dispatching from across the county.
- Kennedale acreage and mini-ranch properties
- Subdivisions off Mansfield Cardinal Road
- Homes along Sublett Road
- Properties near Kennedale Parkway
- Newer 2000s – 2010s subdivision homes
Service Area – Cities Near Kennedale
Our Kennedale crews also cover the surrounding Tarrant County area. Homeowners in Arlington, WA find the same written-price standard and photo-badged technicians, as do residents in Mansfield, TX, Burleson, TX, and Fort Worth, TX. If your gate is failing and you’re in any of these cities, one call reaches the same local dispatch.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kennedale
Most Kennedale calls are reached within the hour, and emergency gate failures can often be scheduled the same day. We keep technicians routed through the wider DFW area to keep Kennedale response times short. Call (828) 426-7081 and we’ll give you a live answer and a realistic arrival window.
Repairs to an existing gate and its motor rarely require a permit in Kennedale, but some subdivision HOAs require written notice before visible changes. We can tell you what’s typical for your area when you call, and our written quote gives you a document to share with your HOA if one asks.
Yes, owner-built ranch gates and retrofitted automatic openers are a big part of what we see in Kennedale. We assess the existing welds, post diameters, and gate weight before quoting, and we tell you plainly if the current setup is workable or needs structural correction first.
For any gate problem in Kennedale, call (828) 426-7081. A live person answers, the estimate is free, and your written price arrives before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kennedale Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.