Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Arlington, TX
Gate repair in Arlington usually costs between $180 and $680 for common jobs like hinge replacement, post re-setting, and gate motor swaps. What makes Arlington work different from the rest of the metro is the soil. The Blackland Prairie clay under most of this city swells and shrinks with every rain and dry spell, and that movement is behind most of the dragging, tilted, and non-latching gates we see here. Call us at (828) 426-7081 and we’ll tell you exactly who’s coming to your door and what the repair will cost before any work begins.
Why Arlington Homes Are Different
Most of Arlington’s housing stock was built between the 1970s and the 1990s, which means a large share of the wood privacy fences and swing gates in this city are now 30 to 50 years old. That’s well past the typical service life for gate hardware, and we see the result every week: rusted hinges, warped frames, and gate motors that have simply given out after decades of Texas heat. In the HOA-governed communities across south and west Arlington, ornamental iron driveway gates are common, and those HOAs often have specific style and color requirements that affect how a repair is done.
The clay soil is the bigger variable. Arlington sits squarely on expansive clay that swells when wet and shrinks when dry. A gate post that was perfectly plumb at installation can lean two to three inches after just one or two wet-dry cycles. In older subdivisions near Johnson Creek and Village Creek drainages, where the clay is especially active, simply re-hanging a gate without re-setting the post in deeper concrete is a guaranteed callback. We pull posts, pour proper footings, and re-set them so the gate stays square through the next storm season.
The weather compounds it. Straight-line winds during severe thunderstorm season routinely top 60 to 70 mph here, warping wood frames and bending ornamental iron hinges. Periodic ice storms, which hit Arlington harder than some cities further south in the metro, freeze automated operators and crack steel components that expanded overnight. Then the summer heat pushes gate operator electronics past their rated temperature thresholds, which shortens the life of automated systems in a way homeowners don’t always expect.
Our Main Arlington Services
Most Arlington calls come down to two things: a gate that no longer opens or closes correctly, or a motor that’s stopped responding. Each of these has its own dedicated Arlington page with full pricing and detail.
Gate Repair in Arlington
A dragging gate on Arlington clay is almost never just a hinge problem. The post underneath has usually moved. We handle the full job: re-setting posts in deeper concrete footings, replacing bent hinges, straightening or rebuilding warped wood frames, and welding ornamental iron back into alignment. On homes built in the late 1970s and 1980s on low-lying lots, we pay extra attention to how far the post has drifted before we touch the gate itself. See the full scope and pricing on our Gate Repair in Arlington page.
Electric Gate Repair in Arlington
Electric gates fail here for predictable reasons: power surges from storm season, electronics cooked by summer heat, and safety sensors knocked out of alignment by shifting posts. We service automated swing and slide gates, diagnose control board faults, and replace burned-out operators. The service covers the full electrical and mechanical path from the keypad or remote to the gate edge. For wiring diagrams, replacement parts, and what a typical repair costs, see Electric Gate Repair in Arlington.
Gate Motor Repair in Arlington
The gate motor, the box that slides or swings your gate automatically, takes the worst of Arlington’s weather. Ice storms crack housings, summer heat pushes circuit boards past their limits, and power surges during thunderstorm season take out control boards without warning. We repair and replace motors from the major brands, and we carry common control boards and capacitors so the job isn’t delayed waiting on parts. For a breakdown of motor-specific costs and turnaround, read Gate Motor Repair in Arlington.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Arlington
We’re factory-trained on the brands Arlington homeowners actually have installed: Viking, Ghost Controls, DoorKing, and Elite among them. We stock common parts for these systems locally, which means most motor and control board replacements happen in one visit. See the full list on our brands page.
Pricing for Gate Company in Arlington, TX
| Service | Typical range in Arlington |
|---|---|
| Gate post re-setting (clay soil) | $280 – $480 |
| Hinge replacement (wood or iron) | $180 – $320 |
| Wood gate frame rebuild | $340 – $680 |
| Ornamental iron straightening or weld repair | $220 – $410 |
| Gate motor replacement (single swing) | $520 – $1,100 |
| Control board replacement | $250 – $540 |
| Safety sensor alignment or replacement | $140 – $260 |
| Full automated gate diagnostic | $95 – $180 |
What pushes a job toward the upper end in Arlington is almost always the condition of the post and footing. If the clay has shifted a post out of plumb, we have to dig, pour a deeper footing, and re-set before any hardware work makes sense. That’s not an upsell; it’s what keeps the gate from dragging again next spring. Whatever the number is, you’ll see it in writing before any work starts, with no additions after the fact.
Neighborhoods We Serve in Arlington
We work across Arlington, from the older subdivisions near the Johnson Creek and Village Creek drainages to the HOA communities in south and west Arlington. Most areas can be reached within 45 to 60 minutes from our DFW dispatch office.
- Pantego
- Dalworthington Gardens
- Southwest Arlington
- North Arlington
- East Arlington
Service Area – Cities Near Arlington
Warden Gate Repair also serves the communities around Arlington. If you’re in Mansfield, TX, Kennedale, TX, Burleson, TX, or Cedar Hill, TX, the same Threshold Standard applies: a named, background-checked technician with a written price before any work starts.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Arlington
Yes. Our DFW-based dispatch office schedules crews across all of Arlington, including the older subdivisions near Johnson Creek and Village Creek and the newer HOA communities in the south and west. Most neighborhoods are reached within 45 to 60 minutes.
Many master-planned communities in south and west Arlington have rules about gate style, height, and color, especially for automated driveway gates visible from the street. Check your HOA’s covenant before any replacement. We can work to your HOA’s specifications once you know them. Call (828) 426-7081 if you’re unsure what to ask your HOA.
It’s the single most common cause of gate failure in this city. The expansive clay swells after rain and shrinks during dry spells, and over one or two seasons a post can lean enough to make the gate drag or fail to latch. The fix is re-setting the post in a deeper footing, not just re-hanging the gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Customers Say
"Fair price and no pushing a whole new gate when all I needed was a new motor capacitor."
- Shirley A."The vetted tech thing was important since our gate protects the whole property. Careful, polite, and walked me through every safety sensor."
- Russell W."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.